Do these clones look right?

redburns

Member
This is my first time cloning. I took these clones 8 days ago. I used cloning gel and put them into rock wool cubes soaked in ph balanced water. They've been under the plastic dome from the beginning and under my T5 light set on 18 hours a day since I took them. I've been watering them and misting them daily. They are really wilted although the color still looks OK. Let me know what you think. Maybe I'm over watering?

Thanks for any comments or thoughts.


IMG_6913.jpgIMG_6912.jpg
 
no, they should stand up like a hard on. Put a thermometer under there and check temps inside. With alot of humidity your temp can be 120-130 easy.
 
no, they should stand up like a hard on. Put a thermometer under there and check temps inside. With alot of humidity your temp can be 120-130 easy.

Thanks. What should the temps be?

I turned off 1/2 of my light set and raised the light about 2 feet, so if the temps were too high, that should cool things down. The temp in the room has been ranging from 65 to 70 degrees, but that thermometer is pretty far from the lights, so it could have been getting too hot.
 
theyll prally come back if you can keep them around 76 degrees, the dome is unessasary unless your humidity is low in the room then spay the doom every 6-8 hours with water.
 
You would also better run the lights 24\0.

I clone at around 28°C, no clue how much that is in °F.
 
Just to let everyone know my clones survived. I had the light way too close and the temps got way too high and wilted the crap out of them. I raised the light a couple feet and kept the dome on, as my humidity is low in that room, have sprayed them a few times and they are looking alot better. They don't quite stick up like hard ons yet, but I think they'll be there in a couple of days. Thanks all.
 
Back
Top