Diy - Glass Pipe Monster

dankshizzle

Well-Known Member

• Jul 28, 2011

• #1

I'm gonna show you how to make your own glass monsterpiece.... First off you need all this shit..
TORCH:

KILN:

GLASS COLOR RODS:

GLASS TUBING 25m:

TOOLS:

MAYBEE AN AC UNIT:

AND A LITTLE GLASS POWDER:

I FORGOT THE GLASSES... THEY WERE ON MY FACE AT THE TIME.

LETS GET STARTED!!
​

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #2

Take your 25m rod and pull off the length of glass your gonna use for your pipe..

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #3

COLOR YOUR TUBING WITH THE POWDER AND BLEND IT IN

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #4

GATHER UP THE BOWL HEAD

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #5

POP A HOLE IN THE MIDDLE OF THE END OF YOUR GLOB

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #6

PUSH THE BOWL INTO THE END OF THE GLOB WITH THE PUSHING TOOL MAKING THE BOWL AS DEEP AS YOU WANT

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #7

This is when the fun starts. Make the teeth how you like. Sharp, dull, loose, whatever

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #8

DESIGN THE NOSE WITH THE TUNGSTEN PICK

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #9

I USE THE PICK TO SHAPE SOME EARS ON THE SIDE OF THE BOWL

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #10

I push the pick into the forehead to make wrinkles

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #11

I put the monster in the kiln while I make this. Start by globbing up a ball of white.

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #12

Now put the color of your choice for the iris on as a glob on the end of the white

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #13

After you blend in the iris, add a smaller dot for the pupil of black.. I use the black to punty up to after words also. so when I break free it wont leave another color behind.

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #14

put the eye in the selected spot and weld it on good

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #15

I choose to wart this guy up with some small clear rod.

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #16

Remove the blow tube by heating and pulling

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #17

Keep picking with a glass rod untill you pop a hole in the mouthpiece

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #18

Make sure your mouth hole is the size you want and put it in the kiln...

Enjoy your new chillum

 

dankshizzle

Well-Known Member

• Jul 28, 2011

• #19

Here are some other I made with this one. (I KEPT THE RED ONE)

 

HellaBlunts

Active Member

• Jul 28, 2011

• #20

love this tutorial, i only i had all that stuff to make them with lol