Can someone walk me through cs 1 branch please.

I have a auto white widow and I want to get some seeds but I only have the one plant so I want to reverse 1 branch with cs as I already have a bottle. This is the cs I have will it work, should I water it down if so how?

I have been searching and have seen people say that they have cs 1 branch to make seeds but I can't find a tut anywhere hoping someone here has done this and can help. Here are some pics of the plant, so what branch do I spray how much of the branch, and when do I start spraying? If you need pics of any part of the plant let me know. I appreciate any help thank you.

try this. its using Tiresias Mist but same principle. [video=youtube;WtZDGR9f3ns]http://www.youtube.com/watch?v=WtZDGR9f3ns[/video]

You'll want at least 30 ppm of silver in your colloidal silver. You will spray every part of the plant you want to produce pollen sacs at least once a day starting when you begin flower. It will take about 2 weeks for the pollen sacs to form give or take a few days depending on the strain. You can use this pollen to pollinate the entire plant or you can pollinate individual branches and then cover them with transparent bags. The CS is harmful if ingested so don't smoke any product that has been contaminated.

my cs is 2,000 ppm should I dilute it? if so how much?

Bad At User Names said:

my cs is 2,000 ppm should I dilute it? if so how much?

Click to expand...

Through my research, 40-50 PPM is what a lot of successful people use, and is what I'm going to be using when I start my project next weekend.

-spek

Starting at 2000 ppm you would want 1 part original mix to 40 parts of water to dilute to 50ppm, 39 to be exact.

(original concentration / desired concentration) - 1 = dilution factor

(2000/50)-1= 39 so ratio is 1:39

Ok I'll dilute it. When should I start spraying?