R.Duke
Member
Good evening, gentlemen, colleagues. I am about +22 days into my first hydro foray. My only other marijuana growing experience was conducted in soil, and ended abruptly (read pissed off girlfriend). I must say, first impressions are astounding; the speed and ease are blowing my damn socks off, akin to growing with rocket boosters.
A little about my setup...
My governing themes were: simple, basic, cheep. I'm rocking a home depot (hence forth to be known as HD) 5 gallon bucket, light proofed with foil tape, a 6in air stone, aquarium pump... and... well that's it!
I started out with a 70 G/hr pump to promote root growth, but I pulled it once roots-hit-water. I corked the end of the hose and poked 2 or 3 holes in it to limit the water flow.
I'm using 2 23W 65K CFLs in HD clamp reflectors for lighting.
As far as nutrients go, I'm just using fox farm grow big.
For PH and nutrient monitoring I use a Hanna instruments combo PH/EC/PPM pen.
The plant itself is a feminized "blue widow" from attitude. It was the bonus seed from my last order. I believe it to have a mutation, but we'll get into that later...
Here are some excerpts from my journal to, "catch a nigga up" as they say:
Aug 19 - Germination begins with seed soaking, and later the ol' paper-towel-on-a-pate trick.
Aug 21 - Seed kicks open. Placed in watered (phed to ~6) 1X1 rock wool cube. Cube on plate with small amount of PHed water.
Aug 23 - Seeds pops 24hr light cycle begins.
Aug 24 - Tap root through bottom of cube.
Aug 25 - Threw her in the bucket. 18/6 cycle starts
Aug 29 - Roots show through net pot.
Aug 31- Roots hit water.
Sept 1 - Kaboom!
Sept 2 - Toped off res with 1/2 gallon
blah blah blah
Sept 6 - Fuckin' algae... suspect res light proofing wasn't sufficient. Plant pulled, roots lightly sprayed to remove buildup.
Sept 7 - More fuckin' algae. Washed the roots, changed the res. ph 5.77 ppm 1010 (water from the tap at 200ppm)
Sept 8 - Respect level for algae increases with the size of it's colony...added hydrogen peroxide, and got serious about light proofing.
Sept 9 - Killed that shit. Some residue (apparently dead algae) clings to the roots. Light rinsing will not remove it. Attempted topping.
Lingering questions:
My main concern(s) has to do with checking ph/ppm levels. I've only got the one hole in the bucket lid, so when I do my checking, I pull the plant out, dip a cup in, check/adjust, pour it back in, and return the plant. That means my plant is out of the bay ~2 times daily. Am I freakin' her out?
Also, I, as per Roseman's advice, have not been riding the "PH roller coster". I let it get as high as 6.7 before nocking it down to 5.5-8. When I added the hydrogen peroxide, shit went ballistic for about a day, and I had to slap it around some. How much can/should I adjust the PH daily?
When topping, are you supposed to remove all the fan leaves above the node, or just the brand spanking new baby development?
I've got three fan leaves shooting out of one node (evident in the pictures). Is she a mutant?
I'm only feeding her FF grow big. Should I be including something else?
Picture time!
A little about my setup...
My governing themes were: simple, basic, cheep. I'm rocking a home depot (hence forth to be known as HD) 5 gallon bucket, light proofed with foil tape, a 6in air stone, aquarium pump... and... well that's it!
I started out with a 70 G/hr pump to promote root growth, but I pulled it once roots-hit-water. I corked the end of the hose and poked 2 or 3 holes in it to limit the water flow.
I'm using 2 23W 65K CFLs in HD clamp reflectors for lighting.
As far as nutrients go, I'm just using fox farm grow big.
For PH and nutrient monitoring I use a Hanna instruments combo PH/EC/PPM pen.
The plant itself is a feminized "blue widow" from attitude. It was the bonus seed from my last order. I believe it to have a mutation, but we'll get into that later...
Here are some excerpts from my journal to, "catch a nigga up" as they say:
Aug 19 - Germination begins with seed soaking, and later the ol' paper-towel-on-a-pate trick.
Aug 21 - Seed kicks open. Placed in watered (phed to ~6) 1X1 rock wool cube. Cube on plate with small amount of PHed water.
Aug 23 - Seeds pops 24hr light cycle begins.
Aug 24 - Tap root through bottom of cube.
Aug 25 - Threw her in the bucket. 18/6 cycle starts
Aug 29 - Roots show through net pot.
Aug 31- Roots hit water.
Sept 1 - Kaboom!
Sept 2 - Toped off res with 1/2 gallon
blah blah blah
Sept 6 - Fuckin' algae... suspect res light proofing wasn't sufficient. Plant pulled, roots lightly sprayed to remove buildup.
Sept 7 - More fuckin' algae. Washed the roots, changed the res. ph 5.77 ppm 1010 (water from the tap at 200ppm)
Sept 8 - Respect level for algae increases with the size of it's colony...added hydrogen peroxide, and got serious about light proofing.
Sept 9 - Killed that shit. Some residue (apparently dead algae) clings to the roots. Light rinsing will not remove it. Attempted topping.
Lingering questions:
My main concern(s) has to do with checking ph/ppm levels. I've only got the one hole in the bucket lid, so when I do my checking, I pull the plant out, dip a cup in, check/adjust, pour it back in, and return the plant. That means my plant is out of the bay ~2 times daily. Am I freakin' her out?
Also, I, as per Roseman's advice, have not been riding the "PH roller coster". I let it get as high as 6.7 before nocking it down to 5.5-8. When I added the hydrogen peroxide, shit went ballistic for about a day, and I had to slap it around some. How much can/should I adjust the PH daily?
When topping, are you supposed to remove all the fan leaves above the node, or just the brand spanking new baby development?
I've got three fan leaves shooting out of one node (evident in the pictures). Is she a mutant?
I'm only feeding her FF grow big. Should I be including something else?
Picture time!