Basic Tips for Cooking with Cannabis

Chef 420

Member
The average pot enthusiast is more likely to dump an ounce of shake into some brownie batter, rather than whip up something actually digestible and effective, so I decided to share some of the best edibles tips to up your cannabis cooking.

Concocting your own pot brownies has long been a haphazard and inexact science for recreational stoners—instructions will vary on the amount of bud and method of infusion, and often DIY cannabis cooks pay no mind to the potency of the strain they're using. And while residents living in states where medical marijuana is legalized can buy a wide-range of edibles from dispensaries, the average pot enthusiast is more likely to dump an ounce of cannabis into some brownie batter, rather than whip up something digestible if left to his own devices.
Don't Throw Actual Weed into the Recipe
That's not the way it works. A lot of people say, "Oh yeah, I put a gram of Blue Dream into my brownies and they were amazing." No, they really weren't. First of all, I don't believe you, because if you're going to put the actual ground-up bud into your brownies, sure, there's going to be some form of decarboxylation that occurs, and you'll get some of the potency of the herb into your brownies. But they'll taste horrible, will give you about half the high, and take longer to take effect.
Potency Isn't Everything
Amateur edible makers will often talk about how strong their brownies are, but I don't think they really understand what that means. When I first got into this industry, I went to a dispensary with some friends who wanted to get some edibles. I was hesitant because I'd already had a bad experience with a highly potent edible that didn't taste good and I thought it was a waste of money for me. Meanwhile, my friend was like, "Oh, a 150 milligram brownie, I'll get that!" It was like $30, and I don't even think he knew what he had just bought.
If there's one message I want to get out there, it's that people need to understand that the typical dose is 10 milligrams of THC. If you want to have a good experience, you should aim for that. Buying a 150 milligram brownie doesn't mean you'll have a good time—you most likely will not. Once you understand the basics of dosing, then you can actually have a really enjoyable experience with edibles.
Pay Attention to THC Percentages and Get Your Ratios Right
You have to know the percentage of THC in the bud you're using. I cook with a lot of high CBD (cannabinol, a non-psychoactive compound also found in marijuana that is often used for medical patients) strains as well, so understanding that is also very important if you're cooking specifically for medical patients. But the thing is, you can't really have too much CBD. The worst that can happen if you overload on CBD is you might get tired and fall asleep.


The bigger issue is having too much THC, because if you are inexperienced and have too much of that, the negative effects are you might get excessive psychoactive effects —You don't want that. You have to know the percentage you're starting with, and then you have to know how thc incorporates into the butter, oil, or tinctures that you infuse it into. You also need to understand the quantity and how to deal with it when making edibles. For example, let's say you're doing a simple boxed brownie recipe that calls for a third of a cup of oil.
A quick fix would be just replacing that with a third of a cup of canna-oil. However, if you do that and you don't understand the potency of the cannabis oil you are using, you can't say how many milligrams of THC are in each brownie, you might actually over-medicate your brownies. But if you understand the potency, you can figure out something like, If I use a third of a cup of oil, each individual brownie's going to be 15 milligrams, and I don't want that. I want each of my brownies to be five milligrams, so I'm just going to make one third of that third be canna-oil, and the other two-thirds will be regular oil. You can actually use a online calculator to figure out how much oil to use based on the THC potency of the bud in order to make edibles with the potency you desire.
Cleaning Your Weed?
Let's just say you took your weed and put it into a crock pot, like a lot of people do, with some butter, oil, and let it simmer. What you're really doing, in addition to simmering all of those cannabinoids into the butter and oil, is also adding in any impurities that are in it. So anything that tastes really bad could be something as horrible as insecticides, dirt, or it could just be the chlorophyll, which also has a specific taste that's pretty powerful.
If you have taken a look at you weed with a magnifier, you will notice trichomes growing like little mushrooms all over. these trichomes are delicate and too strong of a water flow will wash away your high, I try not to wash in water beforehand. If you don't know where your cannabis comes from, and your not sure if pesticides have been used in the growing process, I use a spray bottle and gently let the water with any pesticides drip off, try not to place your weed under running water.
Don't Cook Above 350 Degrees Fahrenheit
What is the highest temperature for cooking with cannabutter? Most recipes call for you to hit 350F, and that would be fine if most ovens were precise and didn't fluctuate between ten and twenty-five degrees of where they say they're at, (All recipes are different cannabutter cookies cook at a different temperature than say, chocolate cake, make sure you fallow the recipes recommendations) Unfortunately that's not the case, and THC starts to degrade at 365 F. So if you're cooking at 350 F, you're likely going to start degrading and evaporating the THC. Use a internal thermometer and test the oven before hand, to make sure there is not a large fluctuation in temperature.
Also, when you're cooking in a pan to, say, sauté' something, you have to be very careful. Obviously people use butter and oil to sauté all the time, but if you're thinking of using canna-butter or recipes using canna oil, just be aware that you can not use it in the same way you would use anything else. When you're cooking a dish that requires a stove top, what you have to do is put the canna butter or canna oil in at the end. Basically, you shut the heat off and you mix the butter or oil around to coat everything while the pan is still hot. That way, you won't lose any of the potency.
 

DemonTrich

Well-Known Member
I'm a former chef, 2yr degree, worked at many fine establishments. 25yrs restaurant experience, 20yrs on the line, 10 with a chef jacket.

Sorry, but your reasoning behind set oven temps and internal food temps is drastically incorrect.

Heres a prime (no pun intended) example.

Last night I cooked a pork tenderloin. Oven set and preheated for 350. Cook time was 35 mins per lb. I cooked a 1.75lb pork tenderloin. It cooked for a total of 48 mins, and the internal temp (taken on a meat thermometer i always use), registered 165*.

So at this temp and cook times, your thc infused baked good, or what ever your making, can not possibly get near the evap point (boiling point) of thc.

I make hundreds of edibles a month for my patients. I have this sop down to a "T".
 

Chef 420

Member
thank you for your time and thoughts. so to get this strait you think if I cook 1.75 lbs of cookie dough for 48 min. at 350, the temp of the dough will only reach 165?
The part, I believe your referring deals with the importance of using an internal thermometer for your oven because of possible inaccurate oven settings.
 
Last edited:

TheCatOutRanksYou

Active Member
Looking to make some butter using hash and wondering how that with work compared to using bud. I've always made my butter by first baking the buds in the oven on a cookie sheet, then cooking it in a pot mixed with the melted down butter. Wondering how long and at what tempt to cook the hash at on the baking sheet for? Any corrections, information and tips are welcome.
 

Thundercat

Well-Known Member
Looking to make some butter using hash and wondering how that with work compared to using bud. I've always made my butter by first baking the buds in the oven on a cookie sheet, then cooking it in a pot mixed with the melted down butter. Wondering how long and at what tempt to cook the hash at on the baking sheet for? Any corrections, information and tips are welcome.
I would just mix the hash into the butter directly and heat it on the stove. I havn't used actual hash, but I use my qwiso to make butter and it disolves nicely right into the butter or oil or whatever fat I'm using for the recipe. It also makes it much easier to dose it that way. You know that you put in "X" amount of hash and got "Y" amount of cookies from the batch. So X/Y=roughly the amount of Hash per cookie.
 

TheCatOutRanksYou

Active Member
Thanks.
For making hash in general I have a hand press I use for all the kief I collect. Would sticking a pressed puck in the oven at a low temp like 180-200 make it bind to a more hash like substance?
 

Thundercat

Well-Known Member
Thanks.
For making hash in general I have a hand press I use for all the kief I collect. Would sticking a pressed puck in the oven at a low temp like 180-200 make it bind to a more hash like substance?
Putting it in the oven will decarb it, but won't effect how it dissolves I don't think. I've only used pressed hash a few times. Usually I use qwiso that I make. But if you put the pressed hash in some butter and warm it up and stir it it should dissolve pretty well.
 

Bud_Babe

Member
Is it an issue if the flower is wet when you start decarbing? I usually soak the bud in alcohol overnight before I decarb.
 

Lucky Luke

Well-Known Member
Is it an issue if the flower is wet when you start decarbing? I usually soak the bud in alcohol overnight before I decarb.
the alcohol will strip the cannabinoids off the flower leaving the alcohol green (from the chlorophyll) and full of cannabinoids. Throw bud away??
 

hellmutt bones

Well-Known Member
I put some keif in my coffe before work once. . Not a good Idea. I had to leave work early cus every one thought I was hungover. But all I wanted to do was chill in the employee lounge. Had a fucked up time driving back home. Never again!
 

tpdeharts

Member
I'm a former chef, 2yr degree, worked at many fine establishments. 25yrs restaurant experience, 20yrs on the line, 10 with a chef jacket.

Sorry, but your reasoning behind set oven temps and internal food temps is drastically incorrect.

Heres a prime (no pun intended) example.

Last night I cooked a pork tenderloin. Oven set and preheated for 350. Cook time was 35 mins per lb. I cooked a 1.75lb pork tenderloin. It cooked for a total of 48 mins, and the internal temp (taken on a meat thermometer i always use), registered 165*.

So at this temp and cook times, your thc infused baked good, or what ever your making, can not possibly get near the evap point (boiling point) of thc.

I make hundreds of edibles a month for my patients. I have this sop down to a "T".
will Organic Extra Virgin Coconut Oil Pure Cold-Pressed Organic Non-GMO give best buzz when making cannabis oil?
 

tpdeharts

Member
heres how I make mine pre heat overn 240 degrees -add 7gr caan to plylex dish spread evenly cover in foil very tightly--40 mintes in oven---remove from oven (keep foil on) cool 30 minutes while crock pot with 1 cup cocnut oil preheats (160-220degrees) - add canna to oil-slowly stir in - *8-*12hours stir every 30 minites - * longer sets in oil more potent - strain & refridge till gets solid ---then cut into portions I store mine in freezer keep air tight --- this from what I read & pratcce very awsom results plzzz reviw & add
 

JohnDee

Well-Known Member
wow thanks got that order cool just got my 1st trophy
Happy to help...I made my first batch of ganja snickerdoodles in 1975. lol

I use coconut oil now and the lithecin enhances bioavailability. Hey on your recipe...how do you aqueeze the remaining oil out of plant matter?

I use an old potato ricer. Works great and you don't risk burned fingers.
Cheers,
JD
 

JohnDee

Well-Known Member
I dont believe the carrier/base (oil/butter/etc) plays any role in absorption.
Thinking about your statement...it's actually quite complex. I could find you a hundred websites that say coconut oil provides better infusions. Seems to be related to saturation. If it holds more THC...even though absorption rates are the same...you would get higher. Same goes for lethecin...as an additive.
JD
 

tpdeharts

Member
Happy to help...I made my first batch of ganja snickerdoodles in 1975. lol

I use coconut oil now and the lithecin enhances bioavailability. Hey on your recipe...how do you aqueeze the remaining oil out of plant matter?

I use an old potato ricer. Works great and you don't risk burned fingers.
Cheers,
JD
I just use mesh strainer ive used coof filtrers too they tell me the sludge in the bottlom leave there dont strain im told that part is very potent --yur thoughts plzz
 
Top