ballast freaking out please help!!!!

ImaReeferHead

Member

• Mar 14, 2011

• #1

i have a 250 watt MH ballast and i know the bulb is good. when i turn it on the light comes on for one minute and turns off but the ballast still hums. then after aproximately 20 seconds or so the bulb begins to flicker and stay a light blue and eventually lights up completely again. it will stay on for one minute again and do the same thing repeatedly. this ballast also has a fuse on it. any suggestions?

 

Muffy

Active Member

• Mar 14, 2011

• #2

Funny that you say the bulb is good because those are the signs of a bad bulb.

 

hellraizer30

Rebel From The North

• Mar 14, 2011

• #3

yep sounds like a bad bulb, but most grow shops have test tables for warranty issue and can test
your ballast, it could be a bad ballast but I doubt it

 

ImaReeferHead

Member

• Mar 14, 2011

• #4

iknow the bulb is good because i have two other 250 watt mh ballasts and the bulbs work fine in those all the bulbs i have tried do the same thing. at this point i have bypassed the fuse and it is still doing the same thing. any other suggestions?

 

hellraizer30

Rebel From The North

• Mar 14, 2011

• #5

mag ballasts are very easy to rebuild and most grow shop will do it for $parts and $30 for labour so id
take it in and get it fixed

 

IAm5toned

Well-Known Member

• Mar 14, 2011

• #6

its a bad ignitor/cap

replace it, and it will work fine.

 

Buddy Ganga

Active Member

• Mar 14, 2011

• #7

If you have other ballasts then why the issue ?

Let the plants share, a little light is better then no light. (unless you're a mushroom)

 

ImaReeferHead

Member

• Mar 14, 2011

• #8

well i have been told the more wattage the higher the yield. thanks for the advice on the ignitor 5toned i appreciate it.

 

Buddy Ganga

Active Member

• Mar 14, 2011

• #9

ImaReeferHead said:

well i have been told the more wattage the higher the yield. thanks for the advice on the ignitor 5toned i appreciate it.

Click to expand...

Yes but the loss of a little bit of light for a day or two untill you are able to correct the situation is not going to change much of anything. Besides, if it's a MH then your still in veg and make up for it with an extra day or two before you flower.

 

ImaReeferHead

Member

• Mar 14, 2011

• #10

your right i am in veg but am still going to be using the mh ballast for my flowering this time around. at the beginning of april i will be upgrading to 2 600 watt hps systems but for now im using the mh with agrosun.

 

mygirls

Medical Marijuana (MOD)

• Mar 14, 2011

• #11

ImaReeferHead said:

i have a 250 watt MH ballast and i know the bulb is good. when i turn it on the light comes on for one minute and turns off but the ballast still hums. then after aproximately 20 seconds or so the bulb begins to flicker and stay a light blue and eventually lights up completely again. it will stay on for one minute again and do the same thing repeatedly. this ballast also has a fuse on it. any suggestions?

Click to expand...

the igniter is going out..

 

ImaReeferHead

Member

• Mar 14, 2011

• #12

thanks for the help heres some pics of what i got without my 3rd ballast

 

Attachments

• 
  room1.jpg

  43.9 KB · Views: 6
• 
  room 2.jpg

  47.9 KB · Views: 6
• 
  babys.jpg

  71.3 KB · Views: 6

hellraizer30

Rebel From The North

• Mar 15, 2011

• #13

looks like there enough light till they get bigger