Amare PPFD mapping

Hybridway

Well-Known Member
First off of like to thank Victor from Amare Tech. For making this possible & for always providing the best customer service & care possible.

About to start mapping. I said I'd do it live so here we go. Setting up now.
The Apogee MQ-500 is the Par-Meter being used.
First light will be the Pro-9 in a 4.5'x4.5' area @ 42" + 32" w/ & w/o lenses.
image.jpg image.jpg image.jpg image.jpg Bare w/ me, this is very time consuming & my room's full of plants.
 
Last edited:

Stephenj37826

Well-Known Member
First off of like to thank Victor from Amare Tech. For making this possible & for always providing the best customer service & care possible.

About to start mapping. I said I'd do it live so here we go. Setting up now.
The Apogee MQ-500 is the Par-Meter being used.
First light will be the Pro-9 in a 4.5'x4.5' area @ 24" + 32" w/ & w/o lenses.
View attachment 3844040 View attachment 3844042 View attachment 3844043 View attachment 3844044 Bare w/ me, this is very time consuming & my room's full of plants.

Is this in reflective area or no?
 

Hybridway

Well-Known Member
Here's our enclosure measuring in @ 4' tall by 4'6" x 4'6" wide.
Squares are 1' , 2' , & 3'. Outside edge is 4'6". image.jpgimage.jpgimage.jpg
Measurements will start @ 42" & then @ 36" which is recommended hieght for this unit. Although it can be used down to 24".
 
Last edited:

Hybridway

Well-Known Member
32" w/o Lens = 707.15 PPFD In a 4'6"x 4'6" area. image.jpg
Next up we're going w/ lenses @ 36" & that will be the last one for the Pro-9 unless there's any special requests.
I'm going 36" instead of 32" or 42" because I believe that to be the best growing hieght. You guys think I Should go 32" or 42" to see the differences?
36" is recommended height.
 
Top