I really like your set up,Thanks, built via lurking this site also. i just have some questions.
1. how does the silencer work? and where in the duct/ fan system do you have it?The fan sits inside that 44 blue gallon drum stuffed full of SIlencer Batts in one of the above photos, alot m2 of batts fit inside a 44 drum! That plastic is nearly 7mm thick which helps. Location is outside, above the tent. Most of the heat is extracted via the 150mm axial fan connected to the hood.
2. do you get a harvest every 16 days?Yes
3. whats your average yield2.5 to 3.5 - still learning
4. Isn't the sensi part A and B only hydro nutrients?Only use Canna Terra Flores and Vege + PK, so no hydro nuts
5. In your cloner do you use a aeroponic style sprayer or a DWC style?About half full of water with air stones in bottom, with temp prop to control heating mat 21.5c (do I need it cooler or hotter), still learning.
Square to round pots: 0.135mm sq x 0.150 long x 0.110mm round (bottom)
25lt reservoir, add Canna Flores and Ph up, as per instructions. 2lt white containers are filled up, 1 container does one Tub in the flowering tent. P.K bottle is added to the 2lt container, as required for each stage of the Tub.
Vegging + Clone room. Growlux 4ft tube. 8 girls ready for the flowering tent.
Mother + Clone room. 150w hps. 18 site bubble cloner (home made). Oil fin heater (find the heat regulates better). Vegging room sits on top, shared 150mm fan extraction. Heat pad under bubble cloner.
Clones are cut anywhere from mother, at what ever length, placed in bubble cloner - pic shows one left a little too long - ooppps.....
