2'Lx7'Wx10'H Closet Grow Smell Proofing Question

What is the best combination between PHRESH filters and CAN-MAX fans for optimal odor control in this 140 cubic feet area? I cannot stress this enough, but what I'm going for is no odor and for it to be EXTREMELY quiet. Another thing is that I do not plan on punching a hole through the wall so INLINE circulating a sealed off closet with CO2 seems optimal. I will be using LED so heat will not be an issue. Opinions will be most grateful

Aspiring Grow3r said:

What is the best combination between PHRESH filters and CAN-MAX fans for optimal odor control in this 140 cubic feet area? I cannot stress this enough, but what I'm going for is no odor and for it to be EXTREMELY quiet. Another thing is that I do not plan on punching a hole through the wall so INLINE circulating a sealed off closet with CO2 seems optimal. I will be using LED so heat will not be an issue. Opinions will be most grateful

Click to expand...

nothing really they are just makers of carbon filters with 2 different designs of metal but active carbon is the same

the whole thing with carbon filters is the prefilter dust trap (clean replace every 4 months or 6) ....match the CFM rating of the fan to the filter .........and the active carbon in the filter is only effective for 12 to 15 months of sucking ...after that the filter needs to be replaced or the active carbon does

now active carbon can be reused if u have a autoclave to steam and pressurize the carbon to remove the smell .........so unless u have access to one the used carbon is no good

what u are asking about is called air polishing
here ......this is premade air polisher u can hang ....that are refillable carbon ......i owe 2 of their filters saves me money the 2nd year carbon was less then 20 bucks from them
http://www.ebay.com/sch/foothill-carbon-filters/m.html?_nkw=&_armrs=1&_ipg=&_from=

ok u asked for a 140 cfm as this does not dump the air out only cycles it removing smell .........u can go a larger stronger one if u feel u want it (cycles the air tho 2/3/4/5 times a min or something)

if u get heat issues later just add a swamp cooler it will keep co2 in the area just cool the co2 down and make like a fountain effect if u have fan blowing strait up
https://www.rollitup.org/Journal/justugh.597604/

Just hook up the carbon filter to scrub if you have to, and you can insulate around the fan so its more quiet.

I have intake at the bottom of my room. Phresh dead center in the top. Inline fane with motor speed control. 4 inch system. I use an exhaust muffler. All sealed with aluminum duct tape. Room corners etc is sealed with aluminum duct tape as well. You can smell zero. A 40x46 area with 450 w of homebrew LEDs will work well. You will get a 10 or so degree rise which you can control with the speed of the fan. Mine is usually at 3/4 now.