Search results

  1. DeMoNeye

    Feeding a DWC Auto?

    Found this... Found both of these nutrients bu can't find the "bloom booster" you mention?
  2. DeMoNeye

    Feeding a DWC Auto?

    I currently grow regular feminised seeds in a simple DWC setup. I feed using Canna products and following the feeding guide from their site here If I want to grow an auto-flowering strain how should I feed the plant - is it the same throughout the growing period?
  3. DeMoNeye

    LED's to Replace Two 600w

    I went for active heating on my small 4x COB grow. I've got to admit some of the heat sinking on the project seem excessive - 56' of 1" heatsink will dissipate A LOT of heat...! Just had a look on diyled - he's using U channel - so no problem there :)
  4. DeMoNeye

    LED's to Replace Two 600w

    I can source everything I need in the UK now, or from european warehouses. The only thing I'm having trouble finding is the 1" wide heatsink bar, well, any heatsink bar... :| Any ideas?
  5. DeMoNeye

    LED's to Replace Two 600w

    2nd post to say thank you - didn't realise the last link had shopping lists (and UK sourcing links) - on the case now and ordering...
  6. DeMoNeye

    LED's to Replace Two 600w

    Unfortunatly https://www.diyleduk.co.uk is out of stock of virtually everything! More than happy going DIY if I've got a list of bits (and supplier links of course :clap:) and a circuit diagram - can you help me with that? :bigjoint:
  7. DeMoNeye

    LED's to Replace Two 600w

    Got him to revise his grow size... It's off to the side of one large tent, as he needs to "work" in it too. He reckons the size is about 100cm x 180cm. He wants to go to LED mainly from a heat point of view - 1200w of HT lights kick off some heat. Considering a kit like this...
  8. DeMoNeye

    LED's to Replace Two 600w

    Think he gets about 28oz out of area..
  9. DeMoNeye

    LED's to Replace Two 600w

    TBH that's my opinion too! So let's say I'm looking for an optimal LED setup for his space...
  10. DeMoNeye

    LED's to Replace Two 600w

    Friend is currently running a grow 140cm x 60cm using two 600w sodium bulbs. He wants to swap to LED to save money. I run a smal grow (60cm x 60cm) with 4 cbx3590 cree LED's so a solution similar to them would be great - these were source from Cutter AU. I'm in the UK but will happily...
  11. DeMoNeye

    LED's to Replace Two 600w

    Friend is currently running a grow 140cm x 60cm using two 600w sodium bulbs. He wants to swap to LED to save money. I run a smal grow (60cm x 60cm) with 4 cbx3590 cree LED's so a solution similar to them would be great - these were source from Cutter AU. I'm in the UK but will happily...
  12. DeMoNeye

    Finishing a Canna Coca Grow?

    Hope I've posted in the right forum - I could of swan there was a dedicated thread for Canna but couldn't find it... cI've been using the Canna Coca grow guide to feed my plants and have a query over final week/flushing? The final week of the grow guide cuts all feed/nutrients apart from...
  13. DeMoNeye

    Stem Bending Assist - 3D Printed

    I'm using an Anet A8 - you can pick them up from Chinese warehouse sellers (banggood, wish etc.) for sub $150
  14. DeMoNeye

    Stem Bending Assist - 3D Printed

    Attached is a zip file containing "plus" and "minus" parts - find a local 3D printing hub and get them printed locally... You can also find them on Thingaverse - https://www.thingiverse.com/thing:2849964 - this will also allow you to access 3D printing hubs directly too...
  15. DeMoNeye

    Stem Bending Assist - 3D Printed

    I run a tiny 60cm square grow under COBS - producing about 7oz per grow. With such a small space I only need about a dozen :)
  16. DeMoNeye

    Stem Bending Assist - 3D Printed

    Try to get gentle bends in tall stems can be a pain using ties and strings etc. I booted up my 3D Printer and created a small "gentle bend" gadget that can used to control bends gently. Just slip the stem in and then fasten with a piece of wire. Weighs virtually nothing so doesn't stress the...
  17. DeMoNeye

    Upgrading Cree COB Array

    4 times? :(
  18. DeMoNeye

    Upgrading Cree COB Array

    I've run several successful grows in my small 60cmx60cm tent using four CBX3590 36v 3500K CD Bin COBs powered by a Meanwell HLG-185H-C1400B LED driver, actively cooled using PC heatsinks and fans. I've just been gifted the space to go up to a 1.2mx1.2m tent - thanks wife :hug: Will my current...
  19. DeMoNeye

    First attempt at a manifold...

    Doing really well - just coming into 5th week of flower - pushing the sides of my tent out - first 4 weeks of flowering,..
  20. DeMoNeye

    Raspberry Pi Dawn/Dusk Light Control

    Some useful stuff in there thank you - I go back to the dark ages coding in virtually pure basic with data dictionaries, PICK... https://en.m.wikipedia.org/wiki/Pick_operating_system
Top