Search results

So it'd be my first go at it, and I was wondering if anyone has used semi-freshly harvested bud to make butter (and then to brownies). I have some popcorn trim that I don't really want, and was wondering if I could throw it in there. If you have used this, how much would you suggest putting in...

I have a small computer fan rated for 12VDC that I wired up to a GPS charger rated for 9VDC so it works fine, just not 100% power. I have some bud hanging in a cardboard box approximately 1'x2'x4' I have the box pretty much sealed, I was wondering if it would be beneficial to pop the fan...

I know that the RH should be <70% when you are curing in the jars, but I was wondering what people shoot for when they have the buds hanging up. My RH will be <25% more than likely, just want to know if this is good/bad/neutral.

I was wondering, I have plants at 7 weeks, seem like they need another week or 2. I wanted to sample a nugget since it's a new strain. If I am going to use a vaporizer, do I need to "quick dry" or can I just cut it up, pack it in the vape and go to town? The buds are very coated.

I'm running a 600w Ultrasun HPS bulb, on a Lumatek electronic dimmable ballast (set to 600w), in a cooltube with an open end (nothing restricting airflow except a mesh covering to stop debris from entering, the screen provides negligible resistance. My grow area is only 2 ft x 5 ft x 5 ft and...

So I noticed one plant at the very end of the light has gone hermie, I pulled it out of the grow room and I noticed it had begun growing a few seeds. I pulled off all the nanners I saw as well as seeds, and put it in a different room to finish. My question is this, I have other plants that...

:wall::wall::wall: Tons of nanners on my one different strain. Just peaked in and found them. It seems to be contained to one plant but I also found a few makings of seeds on the plant as well... There are too many to pick off, I'd like to keep the buds as its week 6...anything I can do...

So I've got 5 mango kush clones starting week 6 of flower, and as you can imagine, the excitement is starting. I was wondering if anyone had a ballpark for when their MK had finished, I have searched and searched and have yet to come up with anything solid. I also have one unknown also...

Does anyone have experience/know if a super spreader will fit in a 6 inch cooltube? Or can you estimate the distance it sits from your bulb? I want to stop some of the direct hot spots right under the light, I figure this will help with temps at canopy level

Does anyone have experience/know if a super spreader will fit in a 6 inch cooltube? Or can you estimate the distance it sits from your bulb? I want to stop some of the direct hot spots right under the light, I figure this will help with temps at canopy level.

So I have a 600w HPS in a cooltube, vented with a 550 CFM fan. I have the fan set at ~50% and I have a temperature sensor taped to the glass directly under the bulb. Temperature on the glass is at 82F and with better positioning of the fan from underneath, as well as ramping up my inline...

It's called reflectix I think, only 15 bucks for enough to cover my walls, any thoughts on the added light, or any heat that might accumulate since it is inuslation after all? I am running a 600 watt in a 5'x2'x4.5' space. Thanks for any help

So, I don't want to get flamed but I just watched http://www.youtube.com/watch?v=Lvq1RZkzw6Y&NR=1 and since I am using GH (Lucas formula) I am very tempted to switch to AN. I know this is probably propaganda but I want to upgrade to a better nutrient anyway. What are people's success with AN...

So I am about to put two of my Mango Kush into flower under a scrog. They are both in separate 5 gallon DWC buckets. I have never flowered in DWC before, and I don't want any disastrous surprises, so I am wondering what is a "safe" PPM to bring my plants into flower? They have a 3' x 2'...

So I was wondering if anyone has experience with the smaller filters that look like intake manifolds for a vehicle. Not the big old white carbon filter, but the smaller baffled ones. My op doesnt really have an issue with smell, but I do want to decrease the CFM/noise of my fan using a...

So I am growing in 2L Hempy buckets and the girls are 2 weeks into flower. They are looking great and appear to have finished the stretch. I now want to defoliate to get more light to more budsites. I know other people have done it later in the flowering (i.e. 21 days and again at 45 days)...

Hempy style kicking off within a few days, I will be putting 5 plants into flower at a time, doing a SoG style grow with 2L hempy buckets. I plan on fitting 20 plants into a 5' x 2' x 4' area and having clones finish at about 24-34in. leaving ample room for space from the HID light source...

So I just finished my first soil grow and did pretty well, at the same time I had a couple of mothers vegging in DWC. I have clones rooting and am ready to make the move to hydro but I am torn between doing 5 Gallon DWC SCROG (600gph of air per bucket) and doing a Hempy SOG. The pro's of the...

I am going to use 360 misters (the ez-clone kind) and I was wondering what you would suggest using for the sprayer array, hard PVC piping or soft 3/4'' vinyl tubing? I can't see how I would get a good seal using PVC, and trying to punch those misters into it, but it seems like other poster's...

So I'm scroggin and I got two plants under a 6 sq ft screen (yea small I know they have it stuffed. They are in week 4 of flower and I haven't trimmed them yet, I was wondering if I should, it seems pretty crowded under the screen with foliage. And yes this is my 1st grow it was more of a...