Search results

  1. Ender87i

    co2 worth it?

    IMO once you see the results CO2 can produce you'll never wanna go back.. Its a total difference in the way your plants grow. Faster, stronger, bigger, healthier looking. And buds much denser with bigger yield.. You can get a controller for around 300 and it will run it for you based on the...
  2. Ender87i

    Cooling room while using CO2? Help!

    To the person who said the mini-split doesn't pump air into your room, im guessing you have your condenser unit inside your room or something? Because when i was talking about how the mini-split pumping air into the room i was assuming the condenser unit was placed elsewhere, somewhere outside...
  3. Ender87i

    Heat stress? recovery time?

    No burnt leaves, they just look rigid like potato chips, rather than smooth.. So im assuming it was most likely from heat stress, and wondered how long it would take for them to go back to looking normal.. Unless this is a symptom of another problem, like a nutrient deficiency, etc... Are there...
  4. Ender87i

    Heat stress? recovery time?

    I have 12 plants in an ebb and flow bucket system, with about 4 different strains. I've had my lights pretty close to the plants, and they seemed to be doing fine, but now one of the strains seems to have heat stress from what I can tell.. The leaves are very rigid looking like a potato chip...
  5. Ender87i

    Cooling room while using CO2? Help!

    Im not sure youre getting my concern.. I think the 12k will be fine. But im not concerned about smell or filtering. What im concerned about is the airflow coming into the room from the minisplit driving my co2 enriched air down in ppm's, and some of it out through cracks, because I have an...
  6. Ender87i

    Cooling room while using CO2? Help!

    Thanks for the rest of the replies. Right now im just hoping to hit a decent enough temp after adding my 2 extra lights that I wont even need an AC.. Since they'll be aircooled, im hoping I can keep it in the 80s and get away without having to use an AC, but we'll see.. Another issue I thought...
  7. Ender87i

    Cooling room while using CO2? Help!

    Only problem is once you get up to the 24k units, they require 240v and im running on 120v. So im not sure how id work around that. As for installing, what quotes are you talking about? It says right on the website you can do it yourself, no professional install required. Anyway, I run on 120v...
  8. Ender87i

    Cooling room while using CO2? Help!

    Ok cool thanks. So if all its doing is saving in electricity, I might go for the 13seer only because its such a big price jump and funds are tight but hopefully not for long. So now the real question is, do I need the 24k or will the 12k be enough for my room? (By the way I realized they come...
  9. Ender87i

    Cooling room while using CO2? Help!

    To the person who replied first let me clarify again: im already running aircooled lights and room fans. With 2x1000w lights aircooled by one 8 inch duct fan, my room sits at about 77-79 degrees. But of course adding 2 more lights is the reason im looking into an ac unit. I think im sold on...
  10. Ender87i

    Cooling room while using CO2? Help!

    What would you consider to be low ambient temp for the unit? The one im considering is the IdealAir brand mini split.. but im open to suggestions if there are other units that are better, or cheaper but still good? Also, if I could put the unit in the adjacent room, I could do the same thing...
  11. Ender87i

    Cooling room while using CO2? Help!

    Basically this is what I mean: My room is in a storage area, and inside my room are doors leading to an attic area which has vents leading to outside. SO, what I did was build a false door between the two rooms with a hole cut in it for my ducting that's cooling my lights.. For a minisplit to...
  12. Ender87i

    Cooling room while using CO2? Help!

    Thanks for the great info! Could you possibly link me to such an auction? I have no idea where to even start looking or what to search for. A link would help a ton!
  13. Ender87i

    Cooling room while using CO2? Help!

    If im running CO2 in a closed-room setup, what are my options for cooling? I know ill need an AC of some sort, so I think my options are either a mini-split, or a portable ac.. The problem with the minisplit is my vents are kind of far from my room, about 50 feet, so I dont know if I could run...
  14. Ender87i

    My Stance on fem seeds in a brief statement

    Someone said its no fun when you know what youre getting sex wise... I say, sex wise, id much rather know if im getting female or male ;) otherwise its a waste of time! Just a joke, I couldn't help myself..
  15. Ender87i

    My Stance on fem seeds in a brief statement

    I respect what the original poster is saying. In addition I agree with it to an extent, as well as enjoy culling and choosing phenos. However there is a time and place for fem seeds, and alot of good points have already been made to back this. For example new growers, although its good to...
  16. Ender87i

    Top 5 Favorite Strains (to grow)

    What do you guys think the best yielding strain is (while still being dank), growing in a 12 bucket ebb and flow system? Gonna be vegged for the full 3-4 weeks.. Im getting ready to order some seeds and need some suggestions!
  17. Ender87i

    Top 5 Favorite Strains (to grow)

    What's the difference between the pre 98 and post 98 Bubba Kush? Im the one that started this thread, and I still havent posted my list, sooo here goes.. first ill list what I've grown, and then some afterthoughts, and a summary of my favs.. Strains I've grown: Blueberry, NL/Blueberry, ATF...
  18. Ender87i

    Inside info about upcoming busts on dispersaries etc!

    Absolutely. Its pretty clear. However let me clarify that independent growers under the OMMP have nothing to worry about. Its the dispensaries that are going to be busted, along with the growers who supply them with their product.
  19. Ender87i

    How often and how long to flood?

    So I shouldn't flood in the dark at all? Even during 12/12?
  20. Ender87i

    Help identifying problem

    Well thats what I thought too, either Calcium or Potassium.. But im already using Calmag. Im using the full botanicare lineup feed chart.. By the way im growing in hydroton clay pebbles.. My pH fluctuates between 5.5 and 6.2 so I think im ok there.. I just don't know what could be causing it. I...
Back
Top