Search results

Cheers bud I’ll wait for the pm. No rush got plenty of time. Room is still in design phase in gathering all the materials I need atm probably around Christmas I look to start building

Can you recommend any good diodes in those wavelengths?

I’m gonna try and make some of my own strips next with Cree royal blue and far red to make up for the lack of those colours in the 3000k hoping I can get them to run on an extra 1000w driver

Yeah my supply is 230v

Yeah I’ve got 540 of these strip leds will have lots of wiring to do but won’t have to do any wiring again for quite some time so don’t mind the graft. Cheers for the help I’ll work out how many in series I can get on this h version and go with that

https://cdn.samsung.com/led/file/resource/2019/10/Data_Sheet_F_Series_G3_CRI80_Rev.1.1.pdf That’s the Led datasheet. icurrently have loads of hlg-600h 36s I’m using with 36v cobs. Was gonna buy loads of 24vof them but the amount of connections was nuts and don’t want to do that again. Plus...

Cheers I hadn’t considered trying to lower voltage. Yeah they are single row 2fters. been looking for the voltage graph based on current for the f series but can’t seem to find it anymore. It doesn’t appear to be on the datasheet I’ll recalc for the lower voltage version. Reason for using...

Oh yeah your right. I looked into these a few days ago and worked that out. I had just forgotten the details when I replied to you. my thoughts were this: l version 380v 2640ma 380v split in series of 15 25.3v each 6 paralel strings on each series string 90 leds total per driver 440ma per...

wont be shocked as the drivers will be insulated and earthed and no exposed wires Obviously the current would be determined by the number of leds used when Wiring in parralel. so say I have 1000w on the driver to play with I should be able to wire 100 Samsung f series 560mm strips in Parralel...

Anyone had any experience or know anything about these drivers? I’m thinking of using them to power my Samsung f series strips And also my own custom strips of Cree far red and royal blue Am I understanding the driver correct when I think the driver will automatically provide the correct...

I thought the only different between a and b was that you adjust b yourself via PWM or a pot?

I’ll ask cutter but I need quite a few of them last time I was on cutters website his prices seemed quite high

What constant current driver can run 600w each? As I have 15sqm to light up small drivers will require me to buy shit tons of them

Ok I guess a better way to put my question is to make my life simpler does anyone know of any 56cm strip lights that are 24v and specific colours? So a royal blue strip light Normal blue strip livht Far red And photo red?

Meanwell hlg-600h-24b can have the voltage adjusted can’t it?

Haven’t checked yet but if each colour requires a different voltage I’m still gonna need 4 or 5 different types of drivers one for each colour. At work atm so havnt had a chance to check data sheets.

Damn so if I want a few photo red, far res, blue, and royal blue I’m going to have to piss about with several different types of driver?

If I use a 24v driver that supplies 1000ma surely the leds will get 1000ma not 575?

I’m struggling to understand this datasheet. https://www.cree.com/led-components/media/documents/XLampXPE2.pdf it shows the voltage going up as the current goes up. So it looks like at 1000ma the voltage is around 3v would would suggest max wattage or 3w each. is this correct? if so would I...

Onto my next smart design... I don’t suppose you have any ideas of what I can use for controlling hieght of my lights? I have something in mind but don’t know what you’d actually call it to search for it. I imagine something looking sort of like a light mover but vertically rising instead of...