Search results

  1. Kretzlord

    a smattering of leaf issues

    Will that negatively affect dissolved oxygen?
  2. Kretzlord

    a smattering of leaf issues

    Rez warmer?
  3. Kretzlord

    a smattering of leaf issues

    No slime in the roots that I can feel btw, but I'm not fingering my root ball too hard lol
  4. Kretzlord

    a smattering of leaf issues

    I am considering going with bennies rather than sterile next time. On about 1/10th of the foliage, some low, some high.
  5. Kretzlord

    a smattering of leaf issues

    I'm sure of nothing lol. The color and spots made me think calcium. Would my PH range cause a K lockout?
  6. Kretzlord

    a smattering of leaf issues

    And my tap is around 250 ppm btw
  7. Kretzlord

    a smattering of leaf issues

    I'll try a flush, and I need to get an ro system but it's not in the budget at the moment (Any suggestions on a model I should look at?) Looks like I need to fill a cooler with my dumb tap water and let it sit out for a day and then flush. Thanks everyone for the suggestions!
  8. Kretzlord

    a smattering of leaf issues

    Dwc, Lucas formula with GH hydro. Plenty of air from the stone, no light penetration in the bucket
  9. Kretzlord

    a smattering of leaf issues

    I figured the clawing was residual n tox. Never using flora grow again lol
  10. Kretzlord

    a smattering of leaf issues

    Yes, using the secondary definition here
  11. Kretzlord

    a smattering of leaf issues

    So take out the dehumidifier and let the rh rise, thereby reducing the amount of perspiration and keeping the water more stable in the bucket? And at my measure this morning my Ppm was 870
  12. Kretzlord

    a smattering of leaf issues

    I let it fluctuate and aim for upper 5's, though it has been dropping rather than rising in the last week
  13. Kretzlord

    a smattering of leaf issues

    So I'm about 4 weeks into flower and have dealt with n toxicity (switched to Lucas formula GH to resolve) and what appears to be a cal/mag issue. I am also dealing with the potential rot of existing roots from another plant that had been in the same block but has been cut. I currently have fan...
  14. Kretzlord

    Mystery seeds and Chinese LED's

    Well I was bad and amputated one of her many arms (weed man wasnt answering)After a quick dry and absolutely no cure time it was about as good as some ditch weed, but with a pleasant heady effect. I am looking forward to how she tastes once fully mature and properly processed. After touching...
  15. Kretzlord

    My first dwc grow when I fill my reservoir do I fully submerge my seedling ?

    As long as you have an air stone and pump the bubbles popping will be enough to keep things happily moist in the basket. When the roots start to grow out of the basket let the water level drop naturally. Important: you may need to top water a bit at the beginning while the roots grow out of the...
  16. Kretzlord

    My first dwc grow when I fill my reservoir do I fully submerge my seedling ?

    Noooooo! Water to the bottom of the basket with an air stone. If the rockwool stays wet it will lead to rot pretty quickly.
  17. Kretzlord

    Lookin for opinions

    What type of nutrients and what sort of lighting will you use? I am dwc, but from what I've read you need to make sure those seals are good. not sure what the best method is and you'll se a lot of back and forth on here, but it's worth a bit of research before leaking a few gallons. Everything...
  18. Kretzlord

    Some help with DIY Cobs, reflector and lenses

    I had mine fairly high up, but my current build is nearly touching the top of my ladies. The radiant heat isn't the issue so much as the convection heat in the air but as long as you have sufficient exhaust you're good. You can use red rtv/silicone from an auto parts store for high temp...
  19. Kretzlord

    Some help with DIY Cobs, reflector and lenses

    Those are the same cobs i vegged with, though with different heatsinks. For a 3x3 area it was nice and strong. But I will suggest directly venting them with some flex duct cause they get hot hot hot. As far as reflectors, you should be able to diy something with metal shears and metal flashing.
  20. Kretzlord

    Ready 4 harvesting??? First grow

    Give it a bit longer, those trichomes still look clear/Not amber. That being said I'm sure you would get a solid high off that lol
Back
Top