Search results

That's what I got

Thanks for the heads up, was about to make an order today but I got cock blocked by visa friggin verified. I need to get a new card one of these days and not forget the password this time.

Agreed, doing the math, even without factoring a 1000w actually may draw 1100w and taking efficiencies into account (30% hps 70% led), I'm getting 300w(usable) for HPS and 228w(usable) for led. Considering what the manufacturers say about power draw on led's is a little higher then what you...

Foaming is usually a problem from using honey/molasses. For what ever reason they tend to foam hard. Like you said though, this is only a problem for the first day. If you keep watch over it for the first 3-4 hours or so you can catch it before it craps all over your airlock. :D

No, you're doing it right if all you have is plastic and glass. For primary, you start with plastic and for the secondary/clearing you go glass. A lot of the stuff is written by people who have been doing it for decades and are a bit out of touch.

Love home brewing, it may eventually lead to home distillation ;). I see you have a plastic primary fermenter, and a glass secondary. If you get into it I would move away from the plastic and get a 2nd glass carboy, that's how us brew snobs roll. Also, the best book on the subject is by John...

Cool, I might have to hit up home depot and just make a custom one and pick up larger climber hooks. I might look about picking up a smaller inline fan for now and switch to something else for a air filtering.

So I've gotten my plants back to health. My friend offsite hit the nail on the head, the spotting may have been a boron deficiency. I took my Gobox, mixed it up at 200pm and every new coming in is fine looking - rest of which will be another story... My new official problem is here... I went...

Once again, thanks for the tip guys. Lifting the light and going to full spectrum might of made the difference. The leaves still aren't uncurling just yet, but this morning there was about a 1/2 of inch of new growth on the larger plant. The spotting is showing up on the new growth, so I figured...

Cool thanks a ton for the pointers, I brought my light up as far as I could for now (38in from the ground), not exactly 36in from the plant but for now that should help. Also I'll be running at full spectrum for the new few days. Hopefully that clears things up. If all is well with the new...

Thanks for some pointers, when I get to repotting I'll mix in a higher % of perlite and will try to lift the lights later tonight. About the full spectrum though, is it safe to do that if you're starting non-fem seeds?

Never transplanted, they're in the same 4 inch pots they were in before. When I flushed I just flushed with enough water to rinse the soil a bit. If it may help though, I can transplant to either a 6.5 inch potter. When I flushed it was pretty much about 1.5x what I normally water with and let...

K, I took some pictures but accidentally deleted the other. This one though is a decent example.

Right now I'm trying to get my roku to run. In about a minute I'll try and take a picture under normal lighting for a better picture.

Hard to say but I would venture to guess somewhere between 10in-12 in as the lowest. Right now its hoisted up as far as it can go up with the rope ratchet, I might need to devise another way to hold the lights up eventually. Right now its at about 15 inches.

The first and last time I fertilized was probably 2-3 weeks ago when the first set of true leaves appeared. I try not to water to often, I give them a day of relative dryness before watering. I flushed the soil finally a few days ago since the new leaves are still coming in with burnt...

I have an aquarium and pool kit ph test actually. Pool one doesn't have a large testing range but the aquarium one does. Tested run off and it appears to be about 6.8 for ph.

These lights really distort my camera photos but you can kind of see the spotting on the close up shots.

Figured I'd ask my LED Lighternauts this instead of posting this to the general community. I'll give as much detail as I can to see if anyone can hit my problem on the head. Observable Problems: Right now for the last few days I've had some downward curling problems, to the point where the...

Going back to the first page and the original posters problem, the original purpose of charging a restocking fee is to cover shipping. Chances are its probably ILLEGAL to charge a restocking fee on an item you have A) Not Shipped out and B) Do Not Even Have. If this was legal, we'd all be in...