Search results

What about if i do veg room and instead of having 40 domes, i would just keep the humidity above 60%? and have them on shelves with t5 lighting

I need them strictly in rockwool cubes. I am being supplied unlimited nutrients, rockwool, lights, etc. So i'm just figuring out whats the best way to produce 2000 clones efficiently.

Thanks a lot for your input! I will do that in my next cycle. Appreciate it brother

How many mothers do i need to produce 2000 clones every 3 weeks? I will be using humidity domes. Should i use 72 in a tray or 50? I am aiming for a success rate of 80%-90%. How long will it take me to get this goal considering I have 32 plants im about to flip into flower. I currently am...

Will i be wasting co2 if im running an intake exhaust for 24hours with the a/c set at 80 degrees? You think i should just do the sealed room with co2 and two scrubbers instead of just having the exhaust with a lot of negative pressure? I'd love to hear your opinion...

I have a similar problem. I have a 16x17size room and I was thinking of just doing an exhaust and intake with the minisplit. I'm more worried about smell than having co2. I have in inline with carbon filter exhausted to the roof turbine vent. I wanted to keep a negative pressure and keep it...

I'll look into that more, so far i just skimmed through the cycloptics and so far so good! Thanks for the recommendation brother!

Good thing i asked. Still got like a month to do my research, i will keep nanolux in mind! Any other brands you've tried?

Which brand is the best to buy right now. I was looking at sun system, nanolux, growers choice, phantom. I heard phantom was no good. Looking at 5 used growers choice cmh 630w DE for $1100 or 10 used 315w cmh sun system for $1500 I have a 12x16 area that it will be going in.

Thanks brotha! I'll make sure :bigjoint:

Temps haven't gotten high enough to use the ac, but it will once i pop on all 4 lights. I have maybe another two weeks until i start using the ac. So i might just lag on the 20amp 120v outlet for another week or so.

I have a buddy that is an electrician and he pretty much walked me through it. I just wanted to see if that was possible, but i will just run another 120v receptacle from the main breaker. My dad does construction for a living, but i was never interested until recently. So i try to Diy things...

Titan Controls Helios 12 - 8 Light 240 Volt Controller w/ Dual Trigger Cords https://www.amazon.com/Titan-Controls-8-Light-Controller-Trigger/dp/B007C3Z9LS/ref=sr_1_3?ie=UTF8&qid=1549411228&sr=8-3&keywords=titan%2Bcontrols%2B8-light%2Bcontroller%2C%2B240v&th=1

Trust me the last thing im going to do is burn down my house... LOL

I ran both wires. sorry, I wasn't being specific enough. It was two hot and one ground. :P

I wanted to give an update and i've just ran a 50amp breaker with 8 gauge cord into an 8-light 50amp input and 40amp output Titan 4 controller relay with dual cord trigger. Can i convert one of the outlets to run 120v? since i only need 4 220volt outlets and i ahve 8 total.

Yeah im just going to run a new 30amp breaker with 10 gauge wire, into a titan controller. I'll just use the 15amps 120v for ac and fans.

It might just be an old breaker i should replace it first huh, then go from there.

Originally i had 6 gavitas 120v-240v in flowering and 4 phantom de 208v-240v for the new room. The gavitas are fine i've been using them for a month now, its just when i put them into the room it starts being weird. it wont even go up to 825w on just a single fixture without turning off...

Yeah i figured that out, but i feel like this house is old. I'm barely drawing like 600w + 231w and its fine, but the light turns off when i switch it to 750... sigh