1st LED grow

Ajthor90

Member
Custom built scrog for these tall ladies, powered by 4 ROI E-680s. 2nd layer going in now. We're on day 8. Still got some lollipoping to do and maybe a deleaf on day 10. First indoor grow is going pretty well, cant wait to see the product!

When do y'all think the best time to deleaf is? I've heard day 10, day 21, or harvest. What do you think?
 

Attachments

Last edited:

farmingfisherman

Well-Known Member
Custom built scrog for these tall ladies. 2nd layer going in now. We're on day 8. Still got some lollipoping to do and maybe a deleaf on day 10. First indoor grow is going pretty well, cant wait to see the product!

When do y'all think the best time to deleaf is? I've heard day 10, day 21, or harvest. What do you think?
Welcome! Congrats on a nice clean space. What lights are you using in there? What strain are you running?
 

farmingfisherman

Well-Known Member
What are the exterior walls, floors and ceiling covered with? Looks super tidy and clean, I'm a fan of good housekeeping when growing plants so totally intrigued specially in a smaller space? How many gallons are the pots you are growing in? It looks like you must hand water?
 

Ajthor90

Member
What are the exterior walls, floors and ceiling covered with? Looks super tidy and clean, I'm a fan of good housekeeping when growing plants so totally intrigued specially in a smaller space? How many gallons are the pots you are growing in? It looks like you must hand water?
Yes I do hand water, for now. I run all my nute water in a 55 gal drum with an air pump and air stones. Theyre in 7 gal fabrics i feed a gal almost every 24-30hr about to start doing 1.5gal tho, probably every other day. They get nutes every feed and love it.

The room was originally a bedroom in my basement with those old asbestos tiles. I busted up all the tile and laid about 1/2" of concrete feathercoat down then painted it with a few coats of epoxy paint, hit it with a clear coat and caulked the edges. Walls are just kilz primer and flat white paint.

Its a sealed room with a co2 tank running on a controller, 1000-1200 ppm.

I've got outdoor experience, but never indoor, so this has all been a learning experience for me, I've delt with a few issues early on getting the lights right, and figuring out the nute balance. All and all, its been a great experience
 

NukaKola

Well-Known Member
Yes I do hand water, for now. I run all my nute water in a 55 gal drum with an air pump and air stones. Theyre in 7 gal fabrics i feed a gal almost every 24-30hr about to start doing 1.5gal tho, probably every other day. They get nutes every feed and love it.

The room was originally a bedroom in my basement with those old asbestos tiles. I busted up all the tile and laid about 1/2" of concrete feathercoat down then painted it with a few coats of epoxy paint, hit it with a clear coat and caulked the edges. Walls are just kilz primer and flat white paint.

Its a sealed room with a co2 tank running on a controller, 1000-1200 ppm.

I've got outdoor experience, but never indoor, so this has all been a learning experience for me, I've delt with a few issues early on getting the lights right, and figuring out the nute balance. All and all, its been a great experience
Doing great for your first indoor run! Keep killing it :bigjoint:
 
Top