1st Grow 1st Journal

Mr5onit

Member
O.K. so I have study, researched, and looked at a lot of threads. So here is my 1st attempt. More pics to come but here is what I have so far ... I'm using the "wet paper towel" method to get these seeds of unknown strain to sprout (got them from a friend who had no idea of what he was token, but it was great!), also I'm going hydro.
Day 1 Nov. 22, 2009:leaf:

P.S.
If any seed expert can give me a clue as to the strain just by looking at the pics I would appreciate the help
 

Attachments

  • germ_seed2.jpg
    germ_seed2.jpg
    19.5 KB · Views: 59
  • germ_seed1.jpg
    germ_seed1.jpg
    17.4 KB · Views: 61
  • hydro_tub1.jpg
    hydro_tub1.jpg
    42.8 KB · Views: 72
  • hydro_tub2.jpg
    hydro_tub2.jpg
    44.6 KB · Views: 63
O.K. so this is my Day 2 post a few hours early
None of the seeds have popped yet so still have time to set up everything. Here are a few pics of the start of the grow tent ... it's real simple just some black tarp to control the light. Plan is to create on tent for flowering and second tent for vegg (mothers and clones)

Day 2 Nov. 23, 2009:leaf:
 

Attachments

  • grow_tent4.jpg
    grow_tent4.jpg
    37.6 KB · Views: 39
  • grow_tent3.jpg
    grow_tent3.jpg
    47.8 KB · Views: 50
  • grow_tent2.jpg
    grow_tent2.jpg
    43.3 KB · Views: 59
  • grow_tent1.jpg
    grow_tent1.jpg
    37.8 KB · Views: 73
  • grow_tent5.jpg
    grow_tent5.jpg
    29.3 KB · Views: 34
lookin good so far.. but that black plastic is gonna absorb your light. you should get sum black&white poly an use the white on the inside. It comes pretty thick too so it would work as the wall like u have it.
 
lookin good so far.. but that black plastic is gonna absorb your light. you should get sum black&white poly an use the white on the inside. It comes pretty thick too so it would work as the wall like u have it.


Good point ... I will work on this ... How about I get some of that Mylar stuff and stick it to the tarp if it holds that should work right?
 
Got about 6 sprouts today put them in the stone wool and hydroton and under the lights as you can see I need more light ... will work on it

Day 3 Nov. 24, 2009:leaf:
 

Attachments

  • sprout_hyr_stone2.jpg
    sprout_hyr_stone2.jpg
    79.4 KB · Views: 54
  • sprout_hyr_stone1.jpg
    sprout_hyr_stone1.jpg
    84 KB · Views: 63
  • sprouts2.jpg
    sprouts2.jpg
    21.9 KB · Views: 49
  • sprouts1.jpg
    sprouts1.jpg
    27.4 KB · Views: 52
  • under_the_lights1.jpg
    under_the_lights1.jpg
    32.5 KB · Views: 59
  • under_the_lights2.jpg
    under_the_lights2.jpg
    32.5 KB · Views: 50
  • under_the_lights5.jpg
    under_the_lights5.jpg
    31.4 KB · Views: 36
  • under_the_lights4.jpg
    under_the_lights4.jpg
    33.9 KB · Views: 40
  • under_the_lights3.jpg
    under_the_lights3.jpg
    31 KB · Views: 47
HOW CUTE:lol:! IM watchin this, it should b a quickee with that setup!!
lol not nice...
no seed expert will ever be able to tell you what strain it is just by looking at the seed.
you are going to want to move that air around in there,
looks like you have more than enough room to build yourself a nice enclosed room. if you are serious about this, id go for that its a good envestment, it will be much easier to control temps in a room
 
Any suggestion or Ideas are welcome ... remember I'm a rookie ... yeah I called myself making a grow tent ... but I used black tarp ... and the hydro store ran out of Mylar ... so I'm waiting on that any suggestions while I wait ... anyway I got those seed from a good buddy who claims that they will be mind blowing ... but he don't remember what kind the are ... lol ...
 
Hey man i am doing my first grow too, but with soil. I want to switch to hydro and am going to watch how you set yours up. Subscribed, good luck bro, keep us updated on how your setting it up, and how your little future ladies are doin.
 
Quick Question ... what is the light period for seedlings? I've read 24hrs ... and I've also read 18/6 ... not sure ... my lights will be on for 18hrs around 6:30pm?
 
Hey man i am doing my first grow too, but with soil. I want to switch to hydro and am going to watch how you set yours up. Subscribed, good luck bro, keep us updated on how your setting it up, and how your little future ladies are doin.


FTG thanks for the subscribe ... i will make a post of the details soon but I followed the setup of the wise Roseman here's a link to his tut ...

https://www.rollitup.org/dwc-bubbleponics/234626-rosemans-diy-bubbleponics-tutorial.html
 
Thanks alot man! To answer your question, when you first plant your seed in the ground, have it for 24 hours until the plant pops out and sprouts it's cotyledon's. Then it is up to you whether to continue 24/0 or swap to 18/6. What I did was gradually change it from 24/0 to 18/6 an hour by day after about the first leaves grew..
 
O.K. so its the 4th day and things seem to be moving well(fast) got some pics of the seeds starting to sprout up.

So I wanted to talk a little about the setup

Black painters tarp
Rubbermaid tote
3.75 inch net baskets
Hydroton
Stonewool
cheap aquarium air pump (for 20 -30 gallon)
2 air stones 12in (to make the bubbles)
ViaAqua water pump
3/4 tubing
1/4 tubing (drip lines)
clamp on lights
100 watt equivalent CFL bulds 5500k
Grow and Flower nutes
1mil mylar


O.K. that's my stuff ... one thing i f'd up on was getting a 30gal tote ... didn't even realize how big the thing was until i put about 12 gals of water in there and it wasn't even half full ... so the only problem is that the 30 gal cost a few bucks more ... anyway just put less water like 10 gals just like I would for the 15 gal tote, and I still get the same bubble action.
oh yeah just got the mylar today from the hydro store .... so i'll add it to the set up in day 5 ...

oh yeah check out these pics ... I think I will have leaves by tonight ... then we can talk about sex baby ....:bigjoint::lol:


Day 4 Nov. 25, 2009:leaf:
 

Attachments

  • sprouting_up1.jpg
    sprouting_up1.jpg
    36.2 KB · Views: 16
  • sprouting_up2.jpg
    sprouting_up2.jpg
    60.1 KB · Views: 26
  • sprouting_up3.jpg
    sprouting_up3.jpg
    56.8 KB · Views: 23
  • sprouting_up4.jpg
    sprouting_up4.jpg
    63 KB · Views: 21
  • sprouting_up8.jpg
    sprouting_up8.jpg
    51.9 KB · Views: 17
  • sprouting_up7.jpg
    sprouting_up7.jpg
    55.3 KB · Views: 20
  • sprouting_up6.jpg
    sprouting_up6.jpg
    59.3 KB · Views: 18
  • sprouting_up5.jpg
    sprouting_up5.jpg
    52.8 KB · Views: 20
  • sprouting_up9.jpg
    sprouting_up9.jpg
    53.1 KB · Views: 12
They are here!! 6 babies ... see pics below

So on to problems that I'm having ... water pump method is not working ... First I set it up and everything seem to work fine, but apparently the tube came loose from the pump and no water has been dripped to the plants ... but when I hooked it all back up I noticed that the pump actually cause too much water to be dripped on the plants ... so I don't think the drip system worked for more than a couple of hours so I'm lucky that the babies didn't drown ... may need to get a smaller water pump ... or add the little 1/4gph drippers to the ends of the drip tubes ...

Also I have found a few lady bugs hanging around ... any thoughts? will they become a problem? will they help?

anyway I add a fan to the setup ... no mylar up yet but will put it up when i get home tonight .... HAPPY THANKSGIVING :bigjoint:

Day 5 Nov. 26, 2009:leaf:
 

Attachments

  • Baby4.jpg
    Baby4.jpg
    36.9 KB · Views: 23
  • Baby3.jpg
    Baby3.jpg
    34.2 KB · Views: 30
  • Baby2.jpg
    Baby2.jpg
    46.3 KB · Views: 22
  • Baby1.jpg
    Baby1.jpg
    33.1 KB · Views: 22
  • Baby5.jpg
    Baby5.jpg
    34.7 KB · Views: 30
  • Baby6.jpg
    Baby6.jpg
    32.4 KB · Views: 20
  • lady_bug1.jpg
    lady_bug1.jpg
    34.4 KB · Views: 23
a few suggestions:

1. get black\white poly istead of that mylar. way easier to hang.
2. if you get too much dripping, get smaller drippers.
3. you will need way more than a 23W CFL (100 equiv.) to grow these plants. get some more lights quick before your plants start to strech.
4. lady bugs are your friends. if you have some bugs they will eat them and reproduce. their eggs should be pretty visible. if you see some and you have too many keep the eggs in the freezer for the next time you see bugs on your plants.

i don't know much about bubbleponics however.

good luck ;D
 
So day 6 ... not much new ... added more lights, started with 3 100 eq CFLs now I have 6 that should help a lot ... I put up a little pice of Mylar since I had already bought it ... that's it ... so check out the random pics

also when should I change the light cycle ( right now I'm just running 24hr on ... when should I go to 18/6? I was thinking tonight would be good ... so I put the lights on a timer ...

I'll check back later for any responses

Day 6 Nov. 27 2009:leaf:
 

Attachments

  • day_6_003.jpg
    day_6_003.jpg
    32.3 KB · Views: 24
  • day_6_002.jpg
    day_6_002.jpg
    28.6 KB · Views: 22
  • day_6_001.jpg
    day_6_001.jpg
    34.7 KB · Views: 25
  • day_6_000.jpg
    day_6_000.jpg
    32.5 KB · Views: 22
  • day_6_008.jpg
    day_6_008.jpg
    34.5 KB · Views: 21
  • day_6_007.jpg
    day_6_007.jpg
    32.7 KB · Views: 24
  • day_6_005.jpg
    day_6_005.jpg
    32.9 KB · Views: 22
  • day_6_004.jpg
    day_6_004.jpg
    31.8 KB · Views: 25
  • day_6_009.jpg
    day_6_009.jpg
    34.4 KB · Views: 19
  • day_6_011.jpg
    day_6_011.jpg
    31.2 KB · Views: 20
  • day_6_010.jpg
    day_6_010.jpg
    27.6 KB · Views: 17
  • day_6_012.jpg
    day_6_012.jpg
    33.8 KB · Views: 17
all is calm ... what's new ... I added 1/2gph drip heads to my feeder tubes ... and I also added the water pump to the timer ... it should drip water to the plants every two hrs or so for 30mins ... I'll check it when I wake up to see if it is too much seems o.k. though

Anyway things seems to be going nicely


Day 7 Nov. 28, 2009:leaf:
 
Back
Top