Recent content by sparks662

everything ive read on here says to go by watts per sq. ft. so 3.5'x7.5'=26.25sq.ft./ 1200w=45.7w per sq.ft. recommended is 50w per sq.ft. so your good with 2 600s. second thing as far as SOG goes the best way to do it is with no veg straight from clone to flower and you shouldnt have a prob...

honestly from what ive read you dont need an RO setup unless the ppm of your tap water is like 300 or well water. the ppms are mainly calcium which is something mj tend to be deficient in anyway so its good for em

from all the stuff ive read ph isnt really a problem till it gets really high like 8 or higher, what nutes u using?

look at the sticky get a harvest every 2 weeks

try getting a germinating heat pad from ur local hydro store, they pop better around 75 water temp from what ive read, and do you mean your using a bubble cloner and rockwool?

there is a whole thread devoted to cap ebb and grow so im guessing if u read a few pages of that thread you could get some of the info your looking for. ive decided to follow al b fuct's ebb n flow style but first i was researching stinkbuds nft/aero system, that thread is titled harvest a pound...

you need to buy some more potent h2o2, normally u can get it from a local hydro store but the rate to use the 50% h2o2 at is 1ml per liter every 3-4 days

nobody said max hardcore yet................ haha jk had to put the most disgusting man in america in the runnings lol

how long have they been germinating? and you are transporting to start veg in the A.G. and not flower, correct?

ive read the best way to clean the hydroton is get what you can out of the rootball then bake on a cookie sheet for a couple hours at 450 and then rinse and the rocks should be clean.

ok guys thanks for all the help i think that im just gonna build 2 bubblecloners it will just be all around easier, and if i have 2 goin they will have a month to set root which if done right should be plenty of time.

ok so i built an aerocloner with a rubbermaid container and ive had my first batch of clones in there for just over 2 weeks and they are barely even rooting. im using clonex in the solution but the bottle is old and stayed outside in a winter so could that be what is causing them not to pop? ive...

ok so when i built my aerocloner following stinkbuds directions it worked great other than the leak from the rubbermaid contained and the pump shit out about 2 weeks into it. my ? is i read in a diff thread about just leaving the pump on all the time, as opposed to 1 min on 5 mins off. does...

ideally ebb and flow is the best system for SOG, but if your focused on doing dwc i would try to find buckets approx 8" wide at the top, at least

bump. and thanks for the suggestions guys, anybody else do anything different?