Recent content by [email protected]

ta for the answer bout 420, yes i have 100m/ 4' rvk inline my air filter is out of an excavator about 2ft long by 1ft diameter wrapped in carbon filter mat fixed at very top of room which goes to form a point (as its under stairs) exhaust staight outside, the osc. fan was 9" but i cut the fins...

yes, oscillating fan, i cannot understand it either hence the post! ive got 3 thermometers in various places in room 4 if you count digtal therm/humid stat with in/out probe the, oven theory seems to be my only answer . temps are good without movement fan on. ive positioned it in various places...

hello ,ive got a problem!grow room dims.3.5'x3'x5'in height, one 400w hps,one 125 w envirolite, anyway ive totally heat insulated room, air tight (except intake ,passive) every time i put osco fan on temps jump up to 90 odd degrees sometimes higher ,is there anything i could do or is my grow...

just came up with an idea ,it works a treat .cheap ,quick way to reduce noise from inline fan.i just took my fan out measured it if it is 300mm /1ft add 50mm /2in to overall size then measure the thickness mine was 300mm x 150mm/1ftx6in found a cardboard box similar size, bigger is better ,then...

was this in uk ?

just wondering if any growers in uk have heard of anyone being busted through buying off eb*y uk,cheers

thanks for your answer,dont think i,ll bother with that one then:peace:

hello just a quick one for ya ,would it be possible it install a fan controller unit in a portable ac unit ?ive had a nightmare with heat in my cab! so ac is only option (i think?) and in your opinion,would it cost too much to run at same time as lights?,also would a reduction in fan speed have...

what a dickhead i am you wont believe what i didnt do ,i didnt screw the blub in fully, sorry to be a knob an ta:peace:

sorted it ta

i,ll do that thanks mate

first off, WHAT a site this is, love it, anywho,every time i plug my 400w lamp into the mains it sparks at the socket and wont come on, it has an integral ballast .i have had the lamp working once (to try it) and took it down because i had work on the grow room, so when i finally got ready to...

its not the socket, got fans plugged in ,to check there working.

and yes it s 240 volts ,i have had it running once

holland. i forgot to mention that i shortend the cable, would this affect capacitor?