Recent content by Billybill

  1. B

    Plant dying? Can’t figure out what’s the issue

    all the bottled water I’ve used is pretty much ro. Always had to add some calmag. Like 150 ppm. It is what it is with this one. On to the next. I would use some calmag. I don’t water till runoff either. Ph of 7.0 with nothing in it should t really affect your ph. Can’t really even check ph if...
  2. B

    Extreme Leaf Curling + N deficiency? Not sure what this is....

    I’m with cage. I would say calcium and possibly a little overwatered. I had a tent do the same exact thing but I think mine was locking out a little due to cold temps. It’s the only thing I could come up with. I use suns super soil and throw in about 150 ppm of calmag. It has worked pretty good...
  3. B

    Extreme Leaf Curling + N deficiency? Not sure what this is....

    What’s the medium? What’s your source of water?
  4. B

    Coco and ppm help

    Here’s a pic of my auto I have going next to it. I switched from a hlg 65 to a hlg 100. Had to raise it. I got some light bleaching. It only took about 2 days to bleach them pretty good. Other than that I worked up to about 900 ppm and I’m dropping it right now for the final couple of weeks.
  5. B

    Coco and ppm help

    I wanted to post the conclusion on here so if anyone looks this up 10 years from now they at least can get some sort of answer….. I hate when threads just die with no conclusion. I moved the plant to a different room. It’s 75 degrees and 60 rh on the average with light on. 66 degrees with lights...
  6. B

    Coco and ppm help

    I was figuring the temp was way low. I’m used to temps being to high. I have a couple others that I’ve been watering everyday that look fine. I’m going to switch to another room in the house that it’ll be about 80 temp and 55 rh. I have a drip system I’m going to set up and start feeding...
  7. B

    Coco and ppm help

    I was hesitant to post on here because of all the negativity. I’ve read everything. The reply’s all contradict each other so I’m going with the ones that make the most sense. I’ve been feeding once a day and it looks super over watered. Like i said…. I don’t care if it dies, I just want to...
  8. B

    Coco and ppm help

    It’s a little wider than a solo cup. I think im going to back off the watering some. I upped the base and the temps.
  9. B

    Coco and ppm help

    Yep. It’s pretty much identical. I get tons of runoff because of the small pot
  10. B

    Coco and ppm help

    I just bumped up the food a little bit but ya. Nutes every water.
  11. B

    Coco and ppm help

    It’s my first time in coco watering everyday. I’ve been watering once a day. I may back down to every other day for a week or so and see how it goes.
  12. B

    Coco and ppm help

    Not real sure about the lifts off temp. I added a heater so it’ll only drop to 72 lights off now. I picked up a thermometer that has the min and max last night.
  13. B

    Coco and ppm help

    2 ml calmag. Works out to about 200 ppm 2.5 ml silica blast. 5 ml liquid karma and 5 ml of pure blend grow (I just upped the grow to 10ml). All per gallon works out to 575 ppm total. Was about 400. I use ro water from the store and when I add all my bites it’s working out to 6.0 so there’s no...
  14. B

    Coco and ppm help

    Looks way worse today. I upped the feed and added a little heat. It was 68 degrees with lights on today. Bad bean, starved to death or too cold.
  15. B

    Coco and ppm help

    I was thinking it was a little cool too. I’m thinking I can get it up to 80 lights on and 70 lights off without to much of a problem.
Top