A
Reaction score
229

Profile posts Latest activity Postings About

  • Where did you get those self tapping screws? I've got some vero 13 and 18's on the way and need to affix them to a heatsink and would rather not have to tap all day and get frustrated. lol Also, which thermal past would you have used...i see artic has some good ones like the silver edition.
    • Like
    Reactions: avnewb
    A
    avnewb
    I used it when it was too cold and it still worked but ideally use at like 70 deg. I also ran out of one of the parts at the end as the bottom last bit was dried in one of the tubes so I had uneven mix but it still worked, but I would make sure you have enough if you are doing a lot of COBs.
    A
    avnewb
    5g should be enough but I ran out after 8 CXA3070s and 30 vero10s but I also probably put too much on at times. Dont make too big of a batch so it wont harden before you use it all and you wont waste any.
    taproot
    taproot
    Thanks avnewb!! Have a great day!
  • Loading…
  • Loading…
  • Loading…
Top