Recent content by algrow12

Can someone tell me if a Meanwell HLG-185H-C700 will power 8 vero 18s.

I'm not opposed to using another driver. I have 4 vero 18s Right now.They are in a 2' x 1' cabinet. I'm finding there's not enough light in some parts of the cabinet. my question is do y'all think that eight vero 10s run at 350ma be enough.I'm running the 18s at 1050ma. any thoughts .

I'm looking for a meanwell driver that can power 4 Bridgelux BXRC-40E1000-B-03 ran in series one that can be dimmed would be great. Thank you in advance

I'm looking for a meanwell driver that can power 4 Bridgelux BXRC-40E1000-B-03 ran in series one that can be dimmed would be great.

Smokey I told you I have the same setup the light comes on at 14 ohms or 233 (mA). It will get warm when you leave it on for about 3 hours. I run mine at 63 ohms or about 1052(mA) and it gets warm to the touch. It won't burn you like the 70w hps would but it is warm. For screws I used a #6 and...

This is what the 70w hps could do so I will see what the veros can do

I think it will only take one fan Smokey, but from the sound of your box you may need to drive them harder. Ive had mine on for 3 days now and to me there brighter then the 70w hps I had in there. The temps are way down now it was about 89f now its 69f. Im thinking about turning up the lights a...

Smoky I tried that with a 19v power supply it didn't work.No light at all. I tested ohms I bought the plugs that are used and twisted the red and black together then tested at the soldering points. Also you said you where going to get the 100k pot it works great thanks for all your input. They...

picograv What would you use to control the dimming function if not the 100komh pot. If you look at the last page of the the data sheet it states a 100k resistor http://datasheet.octopart.com/LPF-60D-36-Mean-Well-datasheet-12548763.pdf

I was wondering if this pot would work with the lpf-60d-36 and if so how would I wire it up. http://datasheet.octopart.com/P231-QC20BR100K-BI-Technologies-datasheet-5355129.pdf

Smokey how did it work with your 100kohm trimpot or will I need to get something else to dim it with. Also what color did you go with.

I have been trying to wrap my mind around this the more I read the more I get confused. I was thinking about using the vero13s for my small space but I can get the vero 10s for half the price. I could use more of them for more points of light. Im thinking 6 2700k and 2 5000k. My question is can...

Thank you all for your help I have a few questions 1 I think i will go with the vero 13 what is the differnce in these chips BXRC-27E2000-C03 BXRC-27G2000-C03 BXRC-27H2000-C03 2 is there somewhere in the US that would sell the drivers and 10W Red 660nm & Blue 470nm chip

Im in need of some help making a DIY light. Its just for a pc grow I have been looking at leds for a while now. The pc is 8"w x 24"L x 20"T. I dont think I need more then say 50w of a mix of 2700k and 5000k with maybe some far red. Ive looked at the Vero 10 thur 29. My questions are 1 How...