oceangreen
Well-Known Member
Hey, guys after much research and tha fact i could get a hold of a 1 minute on 5 minute off cycle timer in Europe, I decided to try and make one myself.
]I went to the local depot store and found a 96pin 2 outlet timer that runs 24 hours in 15 minute increments. it costs about 10 Euros or 15 bucks. They have these timers every where in the states. Its a very simple mod. Here we go.
Unscrew the timer and take the back lid off. You want to focus on the gearbox. The thing is most of these timers use the same universal gearbox. They all come from china, so this is pretty universal.
You want remove the gear I have my tweezers on in the pic attached. Remove it forever. Now!, Flip the BLUE gear upside down. Doing this will make the blue gear contact the second gear from the bottom and it bypasses the one below it. Even though it will be un used, LEAVE IT there to act as a spacer.
Thats it!. No need to spend 50 bucks on a CAP N-1
]I went to the local depot store and found a 96pin 2 outlet timer that runs 24 hours in 15 minute increments. it costs about 10 Euros or 15 bucks. They have these timers every where in the states. Its a very simple mod. Here we go.
Unscrew the timer and take the back lid off. You want to focus on the gearbox. The thing is most of these timers use the same universal gearbox. They all come from china, so this is pretty universal.
You want remove the gear I have my tweezers on in the pic attached. Remove it forever. Now!, Flip the BLUE gear upside down. Doing this will make the blue gear contact the second gear from the bottom and it bypasses the one below it. Even though it will be un used, LEAVE IT there to act as a spacer.
Thats it!. No need to spend 50 bucks on a CAP N-1
