Here's some more on the setup guys.
2-18 gallon tupperware resivoures
2-dule line air pumps, providing oxygen through a toatal of 4 12'' airstones.
2-small aquarium pumps for water circulation.
We cut holes to house 6" net pots, filled with a 50/50 perlite vermaculite mix.
For lighting we've taken surge protected power strips and attached 3 direct bulb to plug fixtures, and then we added a 2-way bulb splitter to each of those.
This allows each fixture(light strip) to house 6 bulbs, up to 42 watts each.
For The seedling stage we are using only 2 of the 4 strips, after the first 3-5 days, we'll hang the additional 2 strips. We will be using Shultz 10-15-10 hydropinc nutrients for the vegitative stage.
For Ventilation, SilverT and I have installed 2 bathroom fans into the cabinet, one housed on the top of the cab, for intake, the other housed inside the cab for extraction. We've attached a DIY carbon filter make of wire mesh and activated carbon home airfilters the the end of the extraction ducting as-well.
We'll be using a small clamp-on desk fan for plant buffing, as soon as the little guys are up.
Thats the basic outline of our equipment, any questions or input is very much appreciated.
