bb61
Well-Known Member
So after reading and lurking here for awhile I've decided to build my box I went with a doublestacked rubbermaid I joined them by cutting out the bottom of the top bin as big as I could. I then used that hole to trace it onto the lid of the bottom bin. I used a heavy duty sealant to join the two pieces and the used paper clamps to add extra support. I lined them using aluminum tape. I should have used Mylar but its already done. On the bottom bin for my intake I already cut a 4" hole and mounted a 4" dryer flapper using the same sealant. I haven't cut my exaust holes yet. Here's some pics:
The two rubber maids stacked and joined
Side view with flapper in
Inside from the top down
The two rubber maids stacked and joined
![](/proxy.php?image=http%3A%2F%2Fi39.tinypic.com%2F347hg0n.jpg&hash=cdcf6628a7d680929c9c2be062ea9cac)
Side view with flapper in
![](/proxy.php?image=http%3A%2F%2Fi43.tinypic.com%2F2zrhjki.jpg&hash=2a57a9634b42ca29d52e8c1658756b54)
Inside from the top down
![](/proxy.php?image=http%3A%2F%2Fi43.tinypic.com%2Ff2iuj5.jpg&hash=4b1579ce535395809bd26f40eb8cecc0)