Best LED for a 5x5 spread?

Jhef

Jhef

Active Member
Roshambizzle said:
https://www.alibaba.com/product-detail/Meijiu-1000-Watt-Samsung-10-Bar_62531174559.html?spm=a2700.galleryofferlist.0.0.2f0756d92q0lId

I'm gonna bet it wouldn't give 2x the results that light would.
Click to expand...
Yea I’ve seen these floating around out there.

No thanks. Rather not ‘Bet’ $50k in lighting on cheap Chinese crap that’ll break or over heat or quit working in a year because Quality control is basically non existent there. And no customer service

Rather stick with an American company if I can, that is going to offer a warranty and actually has a customer service department.
 
R

Roshambizzle

Well-Known Member
Yeah no customer service. Ruby has checked with me about 5 times since i got my light a week ago. You just making bullshit up or what fool told you this? They come with a 2 year warranty like most lights you will get that are "made" in NA (aka shipped from China and MAYBE assembled here if your lucky). I have seen people getting bars sent to them free of charge if its just a bar that starts messing up. You are dealing with a 50 person company with Meijiu not some 10000 employee company being ran by its investors. And you think those companies are going to treat you better??
 
PadawanWarrior

PadawanWarrior

Well-Known Member
Jhef said:
Yea I’ve seen these floating around out there.

No thanks. Rather not risk $50k in lighting on cheap Chinese crap that’ll break or over heat or quit working in a year because Quality control is basically non existent there. And no customer service

Rather stick with an American company if I can, that is going to offer a warranty and actually has a customer service department.
Click to expand...
Not to mention they might not be rated to run a commercial grow, and pass whatever standards they're supposed to. I don't grow commercially, but I know you guys have way more regulations than us private growers.

And I feel the same way. I'll spend the extra cash for US built stuff anytime I can.

I'm curious how long it's gonna take before they start making fake Diablo boards, lol.

I'm sure the Mars boards wouldn't pass commercial standards. They can shock you, and the company says it's normal, and just user error, lol.
 
Jhef

Jhef

Active Member
PadawanWarrior said:
Not to mention they might not be rated to run a commercial grow, and pass whatever standards they're supposed to. I don't grow commercially, but I know you guys have way more regulations than us private growers.

And I feel the same way. I'll spend the extra cash for US built stuff anytime I can.

I'm curious how long it's gonna take before they start making fake Diablo boards, lol.
Click to expand...
Exactly. I’m not about to trust 1000amps to Chinese soldering lmao

That’s what I like about ChilLed is they source their materials from America where they can and they attach diodes to PCB in house.

Bought a couple ROIs for the Veg room the other day... immediately wish I had done HLGs 650s instead. I’m just so used to strips that the small look of the HLG board design deceived me on how good their canopy spread is.
 
PadawanWarrior

PadawanWarrior

Well-Known Member
Jhef said:
Exactly. I’m not about to trust 1000amps to Chinese soldering lmao

That’s what I like about ChilLed is they source their materials from America where they can and they attach diodes to PCB in house.

Bought a couple ROIs for the Veg room the other day... immediately wish I had done HLGs 650s instead. I’m just so used to strips that the small look of the HLG board design deceived me on how good their canopy spread is.
Click to expand...
Hell ya. HLG is quality too. I love all mine. The ChilLed look beautiful too though.
 
C

Caliverner

Well-Known Member
PadawanWarrior said:
Ya, the commercial version is a little more. I know, they aren't cheap.
chilledgrowlights.com

Growcraft X6 - 1000W LED Grow Light - Commercial Grade

Growcraft Light Spectrum Options Passive Cooling Linear Bar Design Thin Profile – Only 1.375in Tall Rugged T Slot Bar Design Oversized surface area for maximum heat dissipation Remote Power Driver Location Lower your heat load by removing power driver outside grow area...
chilledgrowlights.com chilledgrowlights.com
Click to expand...
Must be one hell of a light
 
R

Roshambizzle

Well-Known Member
It's funny you think a company that is forced to make production cheaper yearly by there investors make such a great product. That's how mass production works. Price goes up yearly material quality or time used to build goes down.
 
R

Roshambizzle

Well-Known Member
I have seen quality control here in Canada on stuff like Cadbury candy sour patch kids cherry blasters ETC. You can't get much worse then the QA here so i doubt a small company like Meijiu is going to be THAT bad. I could see a couple thousand employee company being quite different tho. QA still only gets paid so much and it isn't enough to sweat on quality that much. Not like you are getting some of the pie.
 
Rocket Soul

Rocket Soul

Well-Known Member
For a 5x5 its probably better to think in tterms off several lights. Say 4 x 260 hlg or china kits, running on about 200w each or so. Each kit centered inn a corner over a 3x2 area. If youre running china boards liike this, bit softer you minimize risks of problem due to lower power per diode. But with china kits allways get drivers locally or at least in your country. If you want hlg go for hlg kits. Or why not a bunch of qb96? Say 8 of them, corner ones on a 480 driver, extra power needed to get even cover in the corners, and the rest on a 320 driver.
 
Jhef

Jhef

Active Member
PadawanWarrior said:
Not to mention they might not be rated to run a commercial grow, and pass whatever standards they're supposed to. I don't grow commercially, but I know you guys have way more regulations than us private growers.

And I feel the same way. I'll spend the extra cash for US built stuff anytime I can.

I'm curious how long it's gonna take before they start making fake Diablo boards, lol.

I'm sure the Mars boards wouldn't pass commercial standards. They can shock you, and the company says it's normal, and just user error, lol.
Click to expand...
PJ Diaz said:
View attachment 4696347
Click to expand...
Have they released this?

I can only find a 4 board Diablo.
 
S

Snob

Well-Known Member
Jhef said:
Where can you get the same light?

Have you seen Migros review on ChilLed?

When you have a 1000w light that only costs $1600 and will produce roughly $6000-8000 per harvest per light... yea they’re effin you really hard there....
Click to expand...
I had a chilled. Ran it once and sold it. That company really rubs me the wrong way. Their target market is 100% a tent grower.
 
Jhef

Jhef

Active Member
Snob said:
I had a chilled. Ran it once and sold it. That company really rubs me the wrong way. Their target market is 100% a tent grower.
Click to expand...

Really? Glad you said something. Thinking I’ll wait for mammoth to release their 1000w.
 
Jhef

Jhef

Active Member
Snob said:
I had a chilled. Ran it once and sold it. That company really rubs me the wrong way. Their target market is 100% a tent grower.
Click to expand...
Why’d you sell it? And what rubbed you the wrong way?



What’s got me so hard on these chilled is their spread and Migros YouTube review of the 600w backs their claims for the most part
 

Attachments

PJ Diaz

PJ Diaz

Well-Known Member
There's also the little issue about Chilled lying on their sphere test to get better numbers than reality. Their real numbers are good, so not sure why they needed to inflate them artificially.
 
You must log in or register to reply here.
Top