Vertical growing with lm651c and UV, FR & PR in organic soil

Hairiest_Stamen

Well-Known Member
Looks good so far, what brand are the UV diodes?

As to placement on the actual TCI strip I wouldn't. The extra Leds will just add more heat onto that pcb strip. I would add channels in between the TCI strips and attach them to that. That's what I did at least with my strips and Vero cobs. Here's a pic so you can see what I mean.
View attachment 4035932
What was the thought process for adding the small cobs? Different spectrum? Not enough light with the tci?
 

nc208

Well-Known Member
Different spectrum yes. Added a nice bump in the 650nm spectrum. I preferrd this over adding monochrome colors for a better overall spectrum.
 

psychedelicdaddi

Well-Known Member
You probably Mentioned this... but did you use thermal compound or Tape to mount the lights? I think I'm going to buy a bunch of the 2.0xx" heatsink from heatsinkusa tonight.
i cant believe i never responded! it must have never sent? hmm.

well anyway i used two strips of thermal tape side by side so they would cover the whole strip. I actually think i used 2 and a half lengths side by side and used the excess on the following strip. I think the leds measured to 50mm wide, you might want to check.
https://www.ebay.com/itm/Ceatech-20mm-x-25m-Double-Side-Adhesive-Thermal-Conductive-Tape-for-Heatsink-LED/282808653954?_trkparms=aid=555019&algo=PL.BANDIT&ao=1&asc=20150817211709&meid=e3b320d04a144af699d8eb2b654caad6&pid=100506&rk=1&rkt=1&&itm=282808653954&_trksid=p2045573.c100506.m3226
 
Top