i once crafted one when i was a freshman in high school wood shop class.... off course i had all the tools that i needed but for the inside of the tube i used a drill press for shape i used a sawzall and sanded it down to shape but right when i was finishing i cracked it with the drill press because i wouldnt settle for leaving anything in the bubble

__________________
fuelthefade.com

there are some nice wood pieces on this website............

__________________
www.infinitecreationz.blogspot.com check it out.

i'm sure he's found something to smoke out of by now...

haha yea i hope so

__________________
www.infinitecreationz.blogspot.com check it out.

glass on glass = my best friend

__________________
" An empty bowl needs to be filled, A full bowl needs to be emptied "

I've seen it done. The best way to do it is make sure you use a hardwood. Secondly, you need a (Table drill?) IDK what it's called, but basically how the drill works is you put the wood in a clamp, and you use a FAT drillbit (the kind with little wings)

It's not a hand drill, what you do is turn the drill on, then it has a wheel where you turn it to lower the drill into the wood. (If anyone has ANY idea what kind of drilli t is please clear that up)

Then, once you have the hole in the wood you sand it down into a cylinder (Don't sand before you drill) I may have to come back to this thread once I sober up to clear up what I'm saying.

__________________
I have to go pee
feel it pressing on bladder
like a stream, relief

Maybe next time I'll read the whole thread before I post.

__________________
I have to go pee
feel it pressing on bladder
like a stream, relief