hlg-185h-c1400b

Hello people, Been thinking about Switching over to COB LED's from my 250w HPS, in my 60cm X 60cm (2ftX2ft) flowering tent for a couple of weeks now. I'm not running Co2 so was going to try aim for the 1000/1200 PPFD range. The reason for the swap is duo to high temps forcing me to run my fan...

I have a B version hlg185 and it draws 222w when the dimmer wires are disconnected. but when I attach my 10k potentiometer to the white/blue dimmer wires, it only gives me 25 watts at max power. Can anyone help me correct this problem so I can get to vegging? thanks

Hi I'm building a grow light like growmau5 not exactly like his but similar to the canopy 10. Also I'm pretty new to the led game and was wondering if anyone could help me out. I plan on using an independent driver the hlg-60h-c700b it says a voltage of 50-100v I planned on using 12 monos at...

I'm just about to wire up four Cree CXB3590-0000-000N0HCD35G to a Meanwell HLG-185H-C1400B 200.2W 1400mA71-143V. Will this run the COB undimmed at 100%? I will be including a 100k Ohm Potentiometer across the dimming wires, with a fixed short resistor at 10k Ohms. How should I set the dim to...

Hello rollitup growing community, I have just finished my first set of DIY grow lights. Its a simple setup for a 2x3 or 2x2 grow box. I am using an HLG-185H-C1400B driver, currently 2 Cree CXB3950's and some cheap but silent Alpine fans on two separate heat sinks. My driver runs at an operation...