high pressure aeroponics

  1. linuxman

    Top Dawg seeds "NYC OG" - High Pressure Aeroponics (HPA) Grow Journal

    Welcome to my grow journal, I first heard about high pressure aeroponics (HPA) or true aeroponics (TP) about a decade ago at a forum, it was like some mythical rocket science, sounded too true to be real. So few years past and took the liberty and to try it out, more of a research or "learning...
  2. D

    My first aeroponic growth

    Hi everyone! I believe there's no better place for posting some questions regarding general cannabis growth. After searching a bit more about aeroponic, and saw this old thread: Harvest a Pound Every Three Weeks! I would like to invest in my first small aeroponic setup. I've never been growing...
  3. R

    Number of Tefen 1gph misting nozzles

    Any growers with experience using the tefen 1gph misting nozzles? Would like to find out your experience how many nozzles you were running at what pressure and timings? I've made a new setup myself. My pressure is between 60-90psi and im just testing with one nozzle per 68L/18Gal totes as the...
  4. dstroy

    4 Cannaventure Tennessee Kush #2

    100gpd RO 44gal ro reservoir 34gal nutrient reservoir (temp regulated) 2x4gal accumulators ("temp regulated" pseudo) total nutrient volume in the system approximately 44gal 1/10hp chiller 48 site turbokloner (temp regulated) 2'x4'x5' veg tent w/ 560w (10x cree cxb3590 3500k) light 16" wall mount...
  5. dstroy

    2 bagseed “grape ape” clone run

    Same deal, only thing that changed is I “upgraded” (more of a side-grade) to cdp 8852 and I have a 1/2” pickup that splits to 3/8” pump input. All my plumbing push connect fittings and tubing are atp or John guest. 4x4 560w Cree cxb3590 3500k 44 gal res High pressure aeroponics Greenleaf Mega...
  6. dstroy

    Cannaventure 6 LVTK 4x4

    Week 1 12/12 All cannaventure Las Vegas triangle kush, six plants. 4x4 scrog 560w Cree cxb3590 3500k 44 gal res High pressure aeroponics Greenleaf Mega crop @ 1.6EC all the way through first set of leaves to harvest 0.6ml/gal Mammoth p at change 50ml Emerald harvest cal mag at change if...
  7. Maitland

    How to build a $6,000 High-Pressure Aeroponic System (Out-door) in Australia

    After about a year of trial and error (And spending a small fortune), it looks like its finally going to work. A High-pressure Areoponic system that won't clog in the Australian Outback climate. However, the Water pump and Solenoid valve still need their own sound-proof boxes. Something which...
  8. ZxcStaz

    Nutrient Split Cycling

    Creating nutrient profiles has intrinsic limitations and fall backs. Nutrient ratios need to be balanced. This enables a plant to absorb and incorporate elemental necessities. Because the ratios need to be balanced, increased concentrations of salts are required to meet plant nutrition...
  9. dstroy

    Dstroy's NEW grow journal

    What's up? This is a continuation of my first grow journal, but enough has changed that I should start a new thread. My setup currently: two separate HPA loops, recirculating 80-100psi, accumulators, aquatec 8800's, a solenoid on every bucket. Each bucket has three 3/4gph misters, and a...
  10. swiftkillpapa

    twisting plant. The whole plant not just branches

    Anyone ever seen this (see picture) it started this morning. This is a ninja fruit. Not quite sure what's wrong with it. I am having low humidity 36%-40% and 80°-85° temps. Full hpa system. Veg bloom nutes with extra cal mag+ silica and enzymes. pH between 5.8 to 6.0, ec 1.7- 2.0 Citizen clu048...
  11. Mr. Bins

    Welcome to The Bin Lab! Mr. Bins' Modular Aero SCROG - 2017

    I've been building out a new grow setup this summer using high pressure aero / DWC hybrid under COB LED lighting. All flowering will be done using portable SCROG modules that can be disconnected in seconds and wheeled around like carts. Central res is auto topped up with RO water via float...
  12. muleface

    High Pressure Aeroponics - Pump Design/mister layout/misters...

    I haven't really found a lot of information on this subject. The basic premise I have gotten is as follows... - 80-100 PSI pump - around a 40 micron droplet from some kind of misters - run pump from 5 seconds to 2 minutes every 4 to 15 minutes - Pre-Pressurize Accumulator Tank -...
  13. dstroy

    Dstroy's first grow journal

    This will be my first grow journal. I have all the parts I need to build a high pressure aeroponics indoor garden. It will consist of at least 24 plants (not including seedlings/clones) in two 4x4 tents and a 24 site aeroponic cloner (LPA). I will be using 20 (10 per tent) cxb3590 CD bin...
  14. dstroy

    HP aero material

    Hi ladies/gentlemen I've been lurking for a while, and never posted. I'll start by saying that I've got some hydro(dwc, nft, fog)/soil experience and I know what to look for in general plant health. But I've got no MJ experience at all. My wife just got her MMJ license and I'm looking to do...
  15. Dannbo

    Hybrid High-pressure aeroponics and nutrient film table critique

    I'm new here and to the forum scene in general. Hopefully I won't goof it up too bad. I just built a 2' x 10' x 6" deep grow table. Almost finished. Still working on fine tuning the Bell siphon for the ebb and flow function should I go that route. Or I can use the internal stand pipe only by...
Top