What did you accomplish today?

whitebb2727 · Nov 15, 2017

I've been going through some rough cut oak lumber I have. I have a bunch of true 2x8 and 1x at various widths. All 8 foot long. I will be ripping some of the 2x8 in half to make 2x4's. I will then be using the lumber to build a 5x5 flower room in the basement. Figured it was time to go a little bigger.

Thinking of using three 315 watt cdms or around 900 watts of cobs, possibly 1200. Not sure yet.

I will be starting on this before long. I've already started beating the nails out of them.

WeedFreak78 · Nov 15, 2017

Made breakfast. Smoked a bowl. Took clones, turned 100+gallons of dirt. Smoked a bowl. 2 loads of laundry, did dishes. Dab hits. Pulled a gas tank, mirrors and front suspension off a parts car then started loading it with scrap. Smoked a bowl. Moved a dozen, soaking wet, fucking heavy, 8"x 10" x 6ft pressure treat beams, dab hits, just so I could move a couple axles. Smoked a bowl. Tuned up my buddies parents snowblower. Dab hits. Got a different axle set up on jack stands and started pulling the brakes apart. Went to dairy queen and got a burger, fries, soda and Blizzard. Now I'm smoking a fatty, then the Blizzard.

GreatwhiteNorth · Nov 15, 2017

WeedFreak78 said:
Made breakfast. Smoked a bowl. Took clones, turned 100+gallons of dirt. Smoked a bowl. 2 loads of laundry, did dishes. Dab hits. Pulled a gas tank, mirrors and front suspension off a parts car then started loading it with scrap. Smoked a bowl. Moved a dozen, soaking wet, fucking heavy, 8"x 10" x 6ft pressure treat beams, dab hits, just so I could move a couple axles. Smoked a bowl. Tuned up my buddies parents snowblower. Dab hits. Got a different axle set up on jack stands and started pulling the brakes apart. Went to dairy queen and got a burger, fries, soda and Blizzard. Now I'm smoking a fatty, then the Blizzard.

Damn, I'd be unconscious by now if I were you.

WeedFreak78 · Nov 15, 2017

GreatwhiteNorth said:
Damn, I'd be unconscious by now if I were you.

lokie · Nov 15, 2017

My wife made a birthday cake for a coworker's daughter.
It's all made from scratch except the princess decoration.
That's Princess Tiana from The Frog Princess.

Tonight I get to dispose of the surplus.

Nugachino · Nov 15, 2017

I did sweet fuck all... cos its goddamn raining again.

Indacouch · Nov 15, 2017

FUCK HER RIGHT IN THE PUSSY

AND THE ASSHOLE :shock:

Nite guys/gals

Penis

ANC · Nov 16, 2017

Scarce26 · Nov 16, 2017

For this day, I accomplished a lot of things. I've manage and did some follow ups and important phone calls. I was able to settle our over due bills :lol:

WeedFreak78 · Nov 16, 2017

Up at 6, showered, watered the ladies and pruned a little, did dishes( never fucking - ending dishes! ), fed the cats, started a load of laundry, then made breakfast - bacon, eggs, sourdough toast, coffee and oj. I get more done before breakfast than many of you lazy asses do all day, slackers :razz:

.. lol.

Grandpapy · Nov 16, 2017

WeedFreak78 said:
Up at 6, showered, watered the ladies and pruned a little, did dishes( never fucking - ending dishes! ), fed the cats, started a load of laundry, then made breakfast - bacon, eggs, sourdough toast, coffee and oj. I get more done before breakfast than many of you lazy asses do all day, slackers.. lol.

True, but are all your dishes clean now? :lol:

Bareback · Nov 16, 2017

@WeedFreak78 I have a 07 Denali envoy the damn air suspension went out, I can't find the control unit that is suspended to be mounted on the side of the fuse box , do you know of some other locations for it.

WeedFreak78 · Nov 16, 2017

Bareback said:
@WeedFreak78 I have a 07 Denali envoy the damn air suspension went out, I can't find the control unit that is suspended to be mounted on the side of the fuse box , do you know of some other locations for it.

I'm not familiar with those. Shit like that is usually behind the kick panels, or under the middle of the dash, especially if it has a center console. Could also be under hood by the power center/ fuse box.

Bareback · Nov 16, 2017

WeedFreak78 said:
I'm not familiar with those. Shit like that is usually behind the kick panels, or under the middle of the dash, especially if it has a center console. Could also be under hood by the power center/ fuse box.

Ok thanks

WeedFreak78 · Nov 16, 2017

Grandpapy said:
True, but are all your dishes clean now?

No. I can't honestly remember the last time there wasn't some dirty dishes around. I cook multiple times almost every day and am prone to letting shit soak until anything just rinses off before I even touch it with a sponge. :bigjoint:

Then my buddies come around with food and cook and leave the dishes behind. I need a dish washer but my kitchens is too fucking small and has weird low counters that no dishwasher fits under. Luckily I have a huge double farmers sink, like this, so it's not all that bad. My kitchens even that same shitty 40s yellow... :spew:

That's a lot of info on my dish washing habits. I'm so fucking high bongsmilie

curious2garden · Nov 16, 2017

Bareback said:
@WeedFreak78 I have a 07 Denali envoy the damn air suspension went out, I can't find the control unit that is suspended to be mounted on the side of the fuse box , do you know of some other locations for it.

The guys here should be able to help you:
http://www.trailvoy.com/

Frankly I'd seriously consider converting to shocks/struts and coil springs.

WeedFreak78 · Nov 16, 2017

curious2garden said:
The guys here should be able to help you:
http://www.trailvoy.com/

Frankly I'd seriously consider converting to shocks/struts and coil springs.

No way, air ride is the shit for anything you're going to actually put miles on, no way a conventional spring will ride as good. Plus there's almost instant ride height adjustability and load leveling capability. Neither of which can be had with a conventional springs. I'd like to convert my truck to a rear air ride suspension in the future.

curious2garden · Nov 16, 2017

WeedFreak78 said:
No way, air ride is the shit for anything you're going to actually put miles on, no way a conventional spring will ride as good. Plus there's almost instant ride height adjustability and load leveling capability. Neither of which can be had with a conventional springs. I'd like to convert my truck to a rear air ride suspension in the future.

Yeah kneeling in the C5 was something I'd convert too ha ha!

WeedFreak78 · Nov 16, 2017

curious2garden said:
Yeah kneeling in the C5 was something I'd convert too ha ha!

Huh?

curious2garden · Nov 16, 2017

WeedFreak78 said:
Huh?

What did you accomplish today?

Well-Known Member

Well-Known Member

Global Moderator

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Mod

Well-Known Member

Well-Known Mod

Well-Known Member

Well-Known Mod