Good eye, THT! Yeah, I added two CXB3590 four cob lights to the mix for center side-fill. There's zero room on the outside ends of the tents for lights. I've been running in the neighborhood of 1000ppfd with the Samsungs and the Crees are filling with 850ppfd. The strips are the 80CRI 3500K dual row FB24Bs, at four per side driven by two HLG-600H-48As. The Crees are also 3500K and each group of four is driven by an HLG-320H-C2100B. I've been able to keep the strips about 6" to 8" off the canopy with no light burn or heat problems. Temps were set to hold 80-85 with humidity at 65 to 75% during lights on, and 70-72F during lights off throughout veg. CO2 kicks in at 1000ppm and off at 1200ppm, but I'm flowing hard so it typically rises to about 1500ppm a minute or so after the solenoid stops the flow. The reservoir is set for 68F. I was using Cutting Edge Solutions nutes but switched up to Flying Skull for flower. I'm going to stick with Flying Skull from now on.
