Smokey's swing at scrog- 4 way sour dosidos by dank genetics

Will Smokey remember to finish this journal for the next 4+ months?

  • Hope so

    Votes: 3 42.9%
  • Probably not since he's kinda lazy

    Votes: 4 57.1%

  • Total voters
    7
  • Poll closed .

SmokeyMcChokey

Well-Known Member
So it's that time of year again for my room folks. I've never really contributed one of my grows in full with the board and I thinks it's about time I added something of value to the forum.

This is my newest rdwc setup. It's a 4 site in 12 gallon totes. Total water volume of about 45-50 gallons.
(HOLD FOR SETUP PIC)

I will be using Greanleaf MegaCrop to completion with no additives outside of GH calmag if needed.
https://greenleafnutrients.com/product/mega-crop/?v=f24485ae434a

I'm hoping to stick with a single 1k hps through flower on a 5x5 screen. If this proves inadequate I'm eyeing a couple 315 cmh and will shove my 600 hps in the middle somewhere. So don't be surprised if mid grow the lighting changes.
(Fancy pic of my cheapo rig.)

The genetics are 4 femenized Sour Dosidos by Dank Genetics. Looking forward to my first gsc strain.
http://dankgenetics.com/sour-dosidos-2/

Obviously there isn't much to show at the moment as I'm just getting to cleaning out the room and setting up on Sunday. I will add update pictures once a week sometime around noon est Sundays.

Feel free to chime in anywhere if you see something I'm forgetting or have any general questions about my setup in particular.

Well I think that's about it for the kickoff post. I'll go back and update this post on Sunday March 4th with pics of the room etc. Beans will get popped Sunday afternoon and post 2 will detail my germination process.
Until Sunday :blsmoke:
 

SmokeyMcChokey

Well-Known Member
Ok so in typical smokey fashion stuff has come up today. The wife has set me up with things to do and cut my time down to an hour this morning.

IMG_20180304_071228.jpg

I got the room emptied out and the new totes set down. I always forget how bad it gets after a couple runs. I'll get into the ceiling and clean all that up and hang just the 600 to kick off the auto project and wait for the sour dosidos lasses.
IMG_20180304_083844.jpg

Germination will still begin later on tonight. These little things have been calling my name for a few weeks now.

IMG_20180304_083943.jpg

I'm taking tomorrow off so I'll get the new shelf hung and the setup prepped and filled for the first in room leak test.

I still haven't made the decision about whether I'm going to up my air pump to commercial grade and I've got a few things left like boiling out my air stones and rinsing some more hydroton. So lots to do and only a few hours to do it.

I'll check back in tonight with my germination process. But as you can expect it's just the paper towel method. So nothing much to see until tomorrow or Tuesday when they crack and get stuck in the cubes.
 

projectinfo

Well-Known Member
What's under the plastic on the walls?

Have you considered painting your drywall white if it's possible?

Less humidity buildup between the plastic and wall and easier to wash a painted wall imo.

Nice setup. Subbed
 

SmokeyMcChokey

Well-Known Member
What's under the plastic on the walls?

Have you considered painting your drywall white if it's possible?

Less humidity buildup between the plastic and wall and easier to wash a painted wall imo.

Nice setup. Subbed
It's just finished painted drywall. I hadn't considered the condensation thing if I gotta be honest. It's pretty well insulated as all three are exterior walls. I dunno. I put the panda film up mid grow last run when I yanked the tent out of room for height restrictions. My thought was I would just re wrap the walls between runs. I won't do that this time but I will peak back there to check for mold spots. Thank for the heads up I don't know if I have it in me to go get a semi gloss white wipable bathroom paint and hit all that tomorrow morning.
 

SmokeyMcChokey

Well-Known Member
So as I mentioned down they go.

Nothing crazy here. I get a bucket and fill it up with well water. Which today is sitting at 130ppm. IMG_20180304_175120.jpg

Next I added some megarcrop until I got 280 ppm. It was probably 3ish maybe 4 grams. Got that pH'd downed it to I think around 6.2. could be a little higher I need to calibrate my cheapo meter in the morning. I'll use this water for the next few days to keep everything wet.

Time to soak some rockwool cubes.IMG_20180304_175349.jpg

While that's doing it's thing I snagged a pint or two to put in a squirt bottle for the paper towel.

Speaking of paper towel here it is.
IMG_20180304_183126.jpg

Get that thing wet. Not dripping all over but wet. Stick 4 seeds on it.IMG_20180304_183910.jpg

Fold it in half stick it in a sandwich bag with a little puff of air and stick it somewhere dark and warm. I use my router because it's flat and warm. Cable boxes and fridge tops work fine too.
IMG_20180304_184617.jpg

I'll check on em tomorrow morning and then in the afternoon. They will likely be cracked open and ready to drop into the cubes by then. :blsmoke:
 
Last edited:

SmokeyMcChokey

Well-Known Member
Well I'll be damned but I think I just about got everything mocked up for the 48 hour leak in. I get the feeling I'll need to pull it all back apart one last time and hammer a couple pipes in or use some cement. We will seeIMG_20180305_163607.jpg IMG_20180305_163856.jpg


I got everything topped up and all the pumps running and stones bubbling. It looks alright. I could use a bigger feed pump and rigid feed lines but that'll come next run. I'll get a sheet of panda film cut to drop over those tubes to block some light.

I checked on the seeds around 3 and they were right where I figured they would be. Just starting to peak at the tips and along the seam. I'll update with photos of those late tonight or tomorrow afternoon when they get dropped into cubes. Till then :blsmoke:
 

SmokeyMcChokey

Well-Known Member
So just as I thought. 3 are ready to drop into cubes one hasn't shown just yet. I should've done it this morning but work was calling so off I go.
IMG_20180306_065548.jpg

The leak in is going fine. I'll empty it and put some cement on the sweeping elbows. They don't have quite as large a mating surface as standard elbows so they are leaking a few drops probably a quart a day which is far too much to be accepted.
IMG_20180306_070705.jpg


So I'll handle that tonight and get those seeds into cubes asap. Til then :blsmoke:
 

SmokeyMcChokey

Well-Known Member
Got a light proof res?

or sticking with the orange bucket?
Oh for the coco tester? I'll stick with that for now. Pending what the mother in law does this week those will likely end up in her new setup in a week or 2. It's drain to waste and the 5 gallons only lasts like 3 or 4 days so I'm not too worried about shit growth in that bucket and when I set her up the bucket will be out of the tent. Im giving her my 4*4 tent andaa 600 from apollo a buddy gave me.
As far as the rdwc kit I dunno. The lids are sort of see through. I'll get some light leak but I don't know if it'll be bad enough to warrant me getting panda film cut to cover it. Especially once canopy is filled in. We will see how lazy/ how much time wife will let me have out there. I did buy some white plasti dip buy as you can imagine it doesn't prevent light leak only helps reflect some. So maybe a couple coats of black paint then the layer of white. Or just cut a few pieces of black white poly
 
Last edited:

Cold$moke

Well-Known Member
Panda would work but paint is the best .
As its easier to apply if you got somewhere you can paint.


As to the leakage

If its just a SLOW SEEPER it can plug itself with salts in about a week :)
If its a dripper it might take longer or you might want to silicone it in
 

SmokeyMcChokey

Well-Known Member
Panda would work but paint is the best .
As its easier to apply if you got somewhere you can paint.


As to the leakage

If its just a SLOW SEEPER it can plug itself with salts in about a week :)
If its a dripper it might take longer or you might want to silicone it in
Yeah. Im not really wanting to bank on salts so I'll do it right. I'd rather not have to dismantle 3 weeks into flower because I got drunk and bumped a pipe and now it's pissing on my floor. And as far as the lids I'll need to decide today as the sour dosidos goes in this week or weekend.
 

Cold$moke

Well-Known Member
Yeah. Im not really wanting to bank on salts so I'll do it right. I'd rather not have to dismantle 3 weeks into flower because I got drunk and bumped a pipe and now it's pissing on my floor. And as far as the lids I'll need to decide today as the sour dosidos goes in this week or weekend.
Always a good choice ha ha . Tons of people let there systems salt up it happens Best if not


All depends on if you drilled your hole in the exact same spots and have your setup totally level but that water pressure adds up fast :)

Just remember on the totes with the yellow lids i think it would be easiest to cover the flat part with panda and paint the brim of the lid black .
But i would put too much worry in it if your swapping every week
 

SmokeyMcChokey

Well-Known Member
Always a good choice ha ha . Tons of people let there systems salt up it happens Best if not


All depends on if you drilled your hole in the exact same spots and have your setup totally level but that water pressure adds up fast :)

Just remember on the totes with the yellow lids i think it would be easiest to cover the flat part with panda and paint the brim of the lid black .
But i would put too much worry in it if your swapping every week
Nah I'm not. The totes will be my next full run Im just filling them this week. The coco testers eill likely be gone this week. I just don't know that I'm all that worried about it. My last setup was just white buckets. They did fine. We will see
 

Cold$moke

Well-Known Member
In my journal i got the one growing in a coffemate container just to see what i can do in a small container with no light proofing

So far just white roots :) but im using hydroguard
 

SmokeyMcChokey

Well-Known Member
I've never bothered with hydrogen peroxide or any additive for roots. My roots were never stark white but never any slime either. I also used to use floralicious plus and now megacrop so it's not like I have a clear solution either. that's kinda what I pinned the not whiteness on. I think as long as the water stays really well aerated and cool there isn't much to worry about. Only once in my years of dwc has root slime been an issue. And that was in a single bucket grow in a room with 90+ ambient temperature and carpet flooring. Having everything sitting on concrete has really made a difference for me. It's been about 2 years in this house with this room and not a hint of issue yet. I did have to buy a 14k btu standalone air conditioner and vent the hot side out. so I get smell leak that way. I'll need to get a 6 inch y duct and start pushing air through my filter. Which I need a new filter any way so it'll all get tweaked a bit. The room is never done always being modified. I just spoke with a chinese manufacturer and they are sending me 4 sample 315 cmh units and 2 de 630 units for 70$ each. So once I get lamps together I may hang 4 315 and a 600 in center and see what I can produce. All sort of pipe dreams for now until that box shows up 3 months from now off the slow boat from china
 
Last edited:

SmokeyMcChokey

Well-Known Member
Shhhh. You speak it and it'll leak it


IMG_20180306_210414.jpg


So no really I've been chasing non existent leaks. Ima just fill it up and let it run on 2 pumps and see what the hell happens ...

I'm also kind of tipsy and about to check pH on a bucket and some cubes and see what the hell my seeds are doing.
Update in a minute :blsmoke:
 

Cold$moke

Well-Known Member
Good luck looks like it will be a nice setup when done :)

When you get it up and running dont forget to aircool your air pump does magical things ;)
 

SmokeyMcChokey

Well-Known Member
Well shit. 3 came one didn't all three got a bit long. Should have sewn at 6 am. But all the same poked 3 holes longer sewn and gently covered with a 23 watt warmer at 6500k.IMG_20180306_214312.jpg

One new seed dropped onto the paper towel
IMG_20180306_215202.jpg
and if we end up with five one goes to the in law.
If we end up with four perfect.
If only 3 take I may just pop the last two or no more. I'll decide later.
The original 4 burning in.

IMG_20180306_215711.jpg
 
Last edited:
Top