Show us Your Cannabis E-liquid/Share Your Techniques!

outlier

Well-Known Member
IMG_0590i.jpg
IMG_0595i.jpg
IMG_0598i.jpg

My sub-ohm mix. 1 part qwizo to 3 parts pg. Then diluted down with 100% more pg. Diluted because my rig rips through juice and I only want mellow daytime hits for when I'm on the go. 1 hit and I'm cruizen. 2 hits and I'm ripped. 3+ hits and I need to sit down for a while :bigjoint:

Sorry about the poor quality pics. This is the last chamber of juice left. It's about a month old and has been sitting in the cart all of this time. Gear was just popcorn and trim cured for 6+ months. Qwizo was so damn nice I ended up dabbing most of it :weed:

Process is easy, the key IME is getting yourself well prep'ed before you start swishen. I am by no means a concentrate expert either. I read a lot of great info from @qwizoking which helped me really fine tune my iso washes to a T.

First and foremost, cure your herb. Even the popcorn and trim. Makes a world of difference and you can iso wash a little longer without too many consequences (in comparison to washing fresh{er} herb). I have found that the better/cleaner the qwizo is, the easier it will mix with pg and more importantly stay mixed. If you get any separation, just hold the vile in your hand to warm it up and shake. It should mix just as easy as it first did.

Very quick washes with iso. 10-15 seconds max and swirl not shake. Everything must be bone cold. I do everything inside my chest deep freezer in the shed. Make sure you separate the herb from the iso quickly as well. I run mine through an unbleached piece of hemp fabric wrapped around a wire strainer. Then through 2 coffee filters.

I won't even look at the extract until it's glass/shatter looking. This can take 24+ hours depending on humidity/temps/airflow etc..

I heat the qwizo and then slowly add the pg. The qwizo should melt like butter very quickly. Any stubbornness means your qwiso could have been a bit cleaner. At least that's what I've been telling myself... lol

When mixing your concentrate with the pg be careful not to allow any moisture from the steam into your liquid. I find using a bowl that covers the pot of water most effective. I am using an induction stove top where I boil the water and flick it down to the lowest setting before I start heating the concentrate. That seems to give me ample heat through the entire process.

Also, freezing your equipment for the iso wash will introduce moisture if you do not keep it frozen. Another reason to get yourself well organised before you start the iso wash so you're not messing around while everything is thawing on you.

You can get 2-3 washes with the one batch although I have found that quality does start to reduce after the first wash. I generally run twice for my vape juice, then a third much longer time to get the remainder which I'll give away, sell, dab or snow cone my bong rips :eyesmoke:

I also find adding a small amount of vg to each chamber refill can work well if consumed quickly (within 24hrs). I've also messed around with adding nic free flavoured ejuice (50/50 pg/vg). This works well if you don't like the taste. Which can vary a lot between different vapes. That cubis pictured with a 1ohm coil at about 17.5w is my DL bong ripper and 20w for my MTL quick hitter. Taste is phenomenal. Just like the concentrate smells :hump:
 

Attachments

Top