Rosin Tech

WarMachine · Aug 24, 2015

Twitch. said:
co2 is garbage I have done more washes then I can count on co2 for shops

I feel ya but that's what is allowed in San Jose for the most part. I've thought about getting some c02 and winterizing it to see the outcome.

Twitch · Aug 25, 2015

they have no intentions of banning it here, they like all the money they get in mips fees, and no licensed facilities have blown up just jack asses at home

Twitch · Aug 25, 2015

@hyroot hey asshole.... what tea bags are people using instead of the screens? they appear to be tea bags actually for tea.. can you clear this up for me? thanks

I saw somewhere, were it looked like a coffee filter wrap around ground material...

nvhak49 · Aug 25, 2015

So I made some rosin from bubble hash recently and good yields and its good stuff other than it being super tacky and its a pain in the butt to dab it off the parchment paper I've stuck it in the freezer and its more like shatter for a little bit till it gets warmed up than it turns back into a super tacky/sticky oil. Do you guys know how to make it so it's not so tacky and more like a shatter. Wonder if it's from the hash or am I doing something wrong? I've been using a revlon hair straightener heat setting 15 and 25 micron pressing screen.

D_Urbmon · Aug 25, 2015

nvhak49 said:
So I made some rosin from bubble hash recently and good yields and its good stuff other than it being super tacky and its a pain in the butt to dab it off the parchment paper I've stuck it in the freezer and its more like shatter for a little bit till it gets warmed up than it turns back into a super tacky/sticky oil. Do you guys know how to make it so it's not so tacky and more like a shatter. Wonder if it's from the hash or am I doing something wrong? I've been using a revlon hair straightener heat setting 15 and 25 micron pressing screen.

I've found that using a higher grade bubble to begin with makes a more shatter like product while the lower grade stuff makes sap.

I made some 160u and 190u contaminant rosin a while back and I still have it on the parchment cuz it's too much of a hassle to get it off. pure sap

Twitch · Aug 25, 2015

nvhak49 said:
So I made some rosin from bubble hash recently and good yields and its good stuff other than it being super tacky and its a pain in the butt to dab it off the parchment paper I've stuck it in the freezer and its more like shatter for a little bit till it gets warmed up than it turns back into a super tacky/sticky oil. Do you guys know how to make it so it's not so tacky and more like a shatter. Wonder if it's from the hash or am I doing something wrong? I've been using a revlon hair straightener heat setting 15 and 25 micron pressing screen.

when I use a screen of some sort and lower temps usually always give me a more stable oil.

nvhak49 · Aug 25, 2015

D_Urbmon said:
I've found that using a higher grade bubble to begin with makes a more shatter like product while the lower grade stuff makes sap.

I made some 160u and 190u contaminant rosin a while back and I still have it on the parchment cuz it's too much of a hassle to get it off. pure sap

Makes sense, this was from a auto flower that I grew outside that was just ok. I'll try some from my indoor grow come harvest time. Thanks.

WarMachine · Aug 25, 2015

Twitch. said:
@hyroot hey asshole.... what tea bags are people using instead of the screens? they appear to be tea bags actually for tea.. can you clear this up for me? thanks

I saw somewhere, were it looked like a coffee filter wrap around ground material...

Some people are using tea bags, literally Lipton tea bags. I've done it a few times and works pretty well. I just prefer using the 110 silk screen.

Bublonichronic · Aug 25, 2015

I always associated shatters with lack of terpenes with bho...I figured the terps would act as a solvent somewhat kinda dissolving the thc to make it more sappy? This would be the same with rosin? I could be wrong tho

hyroot · Aug 25, 2015

Twitch. said:
@hyroot hey asshole.... what tea bags are people using instead of the screens? they appear to be tea bags actually for tea.. can you clear this up for me? thanks

I saw somewhere, were it looked like a coffee filter wrap around ground material...

Hey dingle berry cuban grower used to use regular tea bags from amazon. Iced tea. Drinking tea.

Build a soil dude uses coffee filters.

Most are using screens. Some are still using just regular old tea bags.

WarMachine · Aug 25, 2015

Bublonichronic said:
600$ ouch..right now I'm tryn to deconstruct a hair straightener and use the plates to make a ghetto press similar to that, won't be able to use that much pressure tho

How's that working out for you? I too was thinking of doing that, making something similar I saw on hash church.

Bublonichronic · Aug 26, 2015

WarMachine said:
How's that working out for you? I too was thinking of doing that, making something similar I saw on hash church.

Not well...hah, can you post a link to the vid you saw on it? Maybe I can get some ideas, don't watch hash church

WarMachine · Aug 26, 2015

Bublonichronic said:
Not well...hah, can you post a link to the vid you saw on it? Maybe I can get some ideas, don't watch hash church

Rosin Tech

13 mins into the video, look at the guy 2nd to the left.

WarMachine · Aug 27, 2015

I found a few hand ratcheting clamps that do 300lbs, 450lbs, and 600lbs of pressure but i just don't know if the hair straightener can handle that pressure. Or even the ceramic plates on the straightener for that matter.

WarMachine · Aug 27, 2015

http://www.homedepot.com/p/DEWALT-6-in-Large-Trigger-Clamp-DWHT83192/204987959

^--- The Dewalt does 300lbs

http://www.homedepot.com/p/BESSEY-12-in-1-Hand-Trigger-Clamp-with-3-1-2-in-Throat-Depth-EZS30-8/205512952

^--- The Bessey does 445lbs

I think I might go for the 445 but I just feel that might be too much..

WarMachine · Aug 27, 2015

Rosin Technique....Easy DIY Solventless

I was always thinking of getting a tortilla maker and this guy kinda makes me want to further get it..

hyroot · Aug 27, 2015

45u bubble that dried for a week then cured for 3 weeks. Then pressed to rosin with a straightener with a 90u screen. All I have is 45u bubble to puff for the next couple weeks. I don't think it will last...lol

I have enough bubble left to make one more rosin patty. Then I half gram left of pressed hash set aside to cure a while ago.

I dropped that flake on it when I packed my last bowl of pre 98 bubba.

nvhak49 · Aug 27, 2015

Not the greatest picture hard to get a good one only using your phone. i pressed it from bubble hash threw a 25u pressing screen it's from a blue mystic AF I grew outside. It's really good but pretty tacky/sappy stuff. I can't wait to press some more from better hash.

HiloReign · Sep 4, 2015

Perhaps I missed it while thumbing through the thread, but how are you guys storing your rosin globs?

Very much appreciate the thread and information shared by everyone who posted~

francy420 · Sep 7, 2015

Rosin Tech

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments