Preregistration For The Great Party Cup Grow Off Of 2018

Sour Wreck

Sour Wreck

Well-Known Member
The Dawg said:
No Hole On The Side. My Question Is Hempy Is just Providing Air To Your Roots So Why Cant You Go From The Top.:peace:

Dirt Growers Are Allowed 1 1/4 Inch Hole In The Bottom Center Of The Cup:bigjoint:
Hydro Growers Are Allowed A Hole Big Enough For A 1 Inch Net Pot To Sit Flush With The Lid bongsmilie

Yes Any Type Of Training Is Allowed :hug:
Click to expand...

i don't want to,

but what if a hydro grower wanted to feed by using a drain to waste method. they would need that 1/4 hole in the bottom too.

just helping out with clarification bongsmilie
 
The Dawg

The Dawg

Well-Known Member
nfhiggs said:
The hole is not for air. Its to allow drainage while maintaining a set amount of water in the container. Kind of like a hybrid DWC/DTW

I was thinking of doing that myself. Assuming I could find a couple of tiny little elbows.
Click to expand...
You Can Do The Same Thing With A Bottom Hole.:weed:
 
The Dawg

The Dawg

Well-Known Member
nfhiggs said:
Not really. Bottom hole just makes it a Drain to Waste. Hempy style utilizes a reservoir of water (like DWC, but much smaller) in the bottom of the container. You're eliminating a whole style of hydro here.
Click to expand...
Ok My Favorite System Is Top Dip Feed I.E. WaterFarm However Unless I Do Some Major Modifications This System Just Doesn't Fit the Bill For The Party Cup Hence The Reason I Run A Swc Or Mini Bubbler. In Short Theirs Many Many Hydro Systems That Dont Fit The Bill When It Comes To The Party Cup.

Now Staying In Guideline While Using The Rules Which States The Dirt Grower Can Have A Small Lid Under Their Cup To Catch Runoff. Why Cant You Modify Your Hempy System To Stay Within The Above Guidelines??:idea:
 
nfhiggs

nfhiggs

Well-Known Member
The Dawg said:
Ok My Favorite System Is Top Dip Feed I.E. WaterFarm However Unless I Do Some Major Modifications This System Just Doesn't Fit the Bill For The Party Cup Hence The Reason I Run A Swc Or Mini Bubbler. In Short Theirs Many Many Hydro Systems That Dont Fit The Bill When It Comes To The Party Cup.

Now Staying In Guideline While Using The Rules Which States The Dirt Grower Can Have A Small Lid Under Their Cup To Catch Runoff. Why Cant You Modify Your Hempy System To Stay Within The Above Guidelines??:idea:
Click to expand...
The drain hole in the side is what defines Hempy. But if its not allowed then its not allowed.
 
The Dawg

The Dawg

Well-Known Member
Sour Wreck said:
well not trying to be difficult dawg, but i can mix nutes, pour it through my cup into the toilet with no reservoir, drain to waste.

an even smaller hole would let the water sit in the cup longer.

bongsmilie:peace::weed:
Click to expand...
Well Their Goes The NeighborHood. Your Not Being Difficult But You Did Take My Next Smartazz Response Away >:( But Thats Exactly How I Would Have Answered That Question About Drain To Waste In A Party Cup. Hey You Want to Stand Over The Toilet And Flush Money Down The Drain Go Right Ahead. Hold On With 1 Rule. Your Must Drain To Toilet During Lights On :bigjoint:
 
nfhiggs

nfhiggs

Well-Known Member
The Dawg said:
Well Their Goes The NeighborHood. Your Not Being difficult But You Did Take My Next Smartazz Response Away >:( But Thats Exactly how I Would Have answered That Question About Drain To Waste In A Party Cup. Hey You Want to Stand Over The Toilet And Flush Money Down The Drain Go Right Ahead. Hold On With 1 Rule. Your Must Drain To Toilet During Lights On :bigjoint:
Click to expand...
Well, Drain to Waste means exactly that - the drainage is waste, its not reused.
 
OneHitDone

OneHitDone

Well-Known Member
nfhiggs said:
The hole is not for air. Its to allow drainage while maintaining a set amount of water in the container. Kind of like a hybrid DWC/DTW

I was thinking of doing that myself. Assuming I could find a couple of tiny little elbows.
Click to expand...
But remember no res pumping or flowing water into the cup. That means IV bags too :fire:
 
hyroot

hyroot

Well-Known Member
The Dawg said:
Yes The Start Date Is Feb 14 Then Growers Will Have 14 Days To Show A Germination Process :hump:


He Hasn't Been Seen Or Heard From Since He Stated He Was Moving South Out Of Alaska????:peace:

Brother The Last Time We Talked You Were Running Induction And I Saw where Inda-Grow Had Switch to SMD's So I Thought You Might Have 1 Of Their New Lamps? :hump:
Click to expand...

I do have the new smd lamp from inda gro. Its Darryl not Dan. It covers a larger area 5x4 for flower. Its being used for regular rotation.
 
3

3GT

Well-Known Member
nfhiggs said:
Not really. Bottom hole just makes it a Drain to Waste. Hempy style utilizes a reservoir of water (like DWC, but much smaller) in the bottom of the container. You're eliminating a whole style of hydro here.
Click to expand...
designed my cup with a fabric top and plastic bottom filled with perlite so the water will run out the side of the cup past the fabric and into my drain tray.
 

Attachments

You must log in or register to reply here.
Top