Parts list for a 2x2 COB build

Anyone have a parts list for a COB light build ? Cobs, driver, heat sinks, holders ? Something in the 200W mark for 5sqft of floor space.

Looking for recommendations.

http://rollitup.org/t/popular-diy-led-cob-kits-parts-list-suppliers.

Personaly, I would consider 2 ft. Bridgelux Gen 2, or Samsung F-series strips.

3 vero29s on a hlg240-48a
We cover about 4x1.5 foot with those.

1212ham said:

http://rollitup.org/t/popular-diy-led-cob-kits-parts-list-suppliers.

Personaly, I would consider 2 ft. Bridgelux Gen 2, or Samsung F-series strips.

Click to expand...

Agreed. With the EB's you get better coverage at 60% of the cost.

Would like to drive 4 up to 200W max. If I were to do a board style build I would want to only use HLG Quantum's. I'm not apposed to Standard style COBs though as they make great lights too. I need a fit and finished end product. Was looing at Rapid LEDs kit but may hold out to see what @CobKits has coming up.

In my 2x2 I use 4xclu048-1212 3000k 90cri driven at 1.05A but you can get a 1.4A driver and dim down if needed.

Nutria said:

In my 2x2 I use 4xclu048-1212 3000k 90cri driven at 1.05A but you can get a 1.4A driver and dim down if needed.

Click to expand...

What driver are you using ? I would prefer to have it on a dimmer, poitometer or on the driver itself. 3-3.5 K to do both veg and flower.

That A part after the model number of the driver tells you it is dimmable with little pots on the driver.

ANC said:

3 vero29s on a hlg240-48a
We cover about 4x1.5 foot with those.

Click to expand...

What type of heatsink do you use?

CPU cooler.

1 citizen 1825 3500K90Min 1 COBS @2200 mA (https://led.cdiweb.com/ProductDetail/CLU0581825C4353H5K2-Citizen-Electronics-Co-Ltd/591004/)
4 SQ.FT. CANOPY 91% EFFICIENT DRIVER @10 CENTS PER KWH
Total power watts at the wall: 126.87
Cobs power watts: 115.45
Total voltage forward: 52.48
Total lumens: 14931.72
Total PAR watts assuming 10% loss: 40.12
Total PPF: 214.39
PPFD based on canopy area: 576.93
1 HLG-120h-48A driver
1 https://led.cdiweb.com/ProductDetail/MODULEDGIGA152150BHBG-MechaTronix/574069/
https://led.cdiweb.com/ProductDetail/MODULEDGIGA152150BHBG-MechaTronix/574069/
No cob holder needed, it will screw directly to the heatsink. Youll have to solder the wires on, but thats easy on a large cob like that.... It will probably be too bright for that area, but you can adjust it via the built in pot

ChaosHunter said:

What driver are you using ? I would prefer to have it on a dimmer, poitometer or on the driver itself. 3-3.5 K to do both veg and flower.

Click to expand...

I use a HLG-185h-1050A since B version was not available.
Get a B version driver, it has 2 additional wires for an external potentiometer

ChaosHunter said:

Anyone have a parts list for a COB light build ? Cobs, driver, heat sinks, holders ? Something in the 200W mark for 5sqft of floor space.

Looking for recommendations.

Click to expand...

You know tastyled.com is having a closing down sale. Lots of half priced stuff. Ask @Rahz

Not a lot left, but I do have the parts to put together another T3P.

https://www.tastyled.com/product-p/t3p.htm