Part required for vac pump for BHO

Dannoo93

Well-Known Member
So question is the title can someone supply me with a list of the items required to have a vac pump setup to purge BHO
 

650baquet

Active Member
Assuming you don't have either you need to get both. Easy route is to order them, or you could make your own vacuum chamber. What's your plan Stan?
 

Dannoo93

Well-Known Member
Ok so any recomendations for.brand of pump i usually use ebay...i looked around and ive read a bit just didnt know if theres more
 

vacpurge

New Member
anything electric is more than enough.

105$ for the above one on ebay.. just a cheap chinese one. pulls enough of a vacuum for what we use it for.
 

Guzias1

Well-Known Member
Ok so any recomendations for.brand of pump i usually use ebay...i looked around and ive read a bit just didnt know if theres more
what vacpurge said, anything electric is more than enough..
you can go as cheap as you want mang. just depends on how much you wanna make

how much oil you trying to purge?

ebay has chambers ranging from this too that.

if you are trying to just go cheap as possible route, id say get the lowest cfm powered vacuum pump, along with the smallest chamber you can find.

be careful with the vac it pro chamber. the lids have been known to crack. so iff you get a VAC IT PRO, i'd say get a tinyy pump.

here is your budget search list ebay:

3 cfm rotary vane vacuum pump

1.5 gal vacuum chamber
or
3 gallon vac it pro


IR (infrared) Laser Thermometer ( or you something you potentially have laying around that measures heat PRECISELY)

pancake griddle... hit up a local department store..

vv click here vv
check this out mang

dig as deep as you can, if you ask one more question on here that has not been asked on that thread, I keeel you. :]
-go to that thread, and at the top, you can type key words into the search bar. its better than using google for bho :]

anddd, if you gots a new question, I'd love to hear it!
 

vacpurge

New Member
weird how it brings me to page 28... 1/4 way in the thread. you must have post set to 40 per page and not 10. that thread for me is 109 pages... congrats! lol.
 
Top