HghFlyrJD1
Active Member
Decided to show some pictures of my grow room as it stands today..Plus these items arriving soon.
CAP XXXTREME 8"
1000W HPS Maxlume (140,000 lumens)For Now.
CAP NEXTGEN 1000W SWITCHABLE DIGITAL BALLAST 90/260 VOLT
Nextgen Cord 240V
C.A.P. ValuLine 8” Fan 745 C.F.M. 1.7 Amps
CAP INLINE DUCT 4" FAN 171 C.F.M 1 Amps
CAN FILTER 50 w/o FLANGE (Fits 8", 10", & 12" Flange)
CAN FILTER 8" FLANGE.
Ordering Next Week.A 2 and 4 Foot 8 Tube HydroFarm T5 Fixtures.
The whole outside and inside will be sheet rocked,and a door added on the outside wall.Each separate interior room will also have there own doors,lined with Mylar and rooms sealed.
All white tubing is 4 inch drainage tubes.Smooth Black Inside.Cost Less then PVC.Gonna Exshast straight out the window trough the crawl space.And Intake from there as well. Gonna add small coin size holes a few at a time and add or increase holes or size until i get the wanted flow and temps.That's the Plan.Shoot me some suggestions.Its framed so that is not changing..Suggestions on the Exhaust and intake will be much appreciated.I hope to dump cool fresh air directly into each room toward the bottoms.On the back wall in the center area I will have a sink with a cabinet below with shelves above it..Over head the Next gen Digital Ballast will mount to the beam.The Can 50 Filter I will decide on where to hang that.
Lay Out.
Top section of the Veg side (left) will be split into 2 sections.One side to fit the HydroFarm 2 foot 8 tube fixture,for the clone machine and recently rooted and potted clones.The other section for storage.Over all size. 26.5 x 57.5 x 42.
Bottom Section.Full Veg-26.5 x 57.5 x 46..4 Foot 8 Tube T5 HydroFarm Fixture.
Flower Room(Right).41.5 x 57.5 x 89..XXXtreme 8 inch Reflector Measurements-43" x 31.5" x 17".Guessing 7-10 plants in this area?I will decide on pot size, I'm sure that will help me decide how many I can fit with out packing it tight.
The 2 T5 Fixtures will go on order next week.Hope to Finnish and be up and running by the end of the month.
CAP XXXTREME 8"
1000W HPS Maxlume (140,000 lumens)For Now.
CAP NEXTGEN 1000W SWITCHABLE DIGITAL BALLAST 90/260 VOLT
Nextgen Cord 240V
C.A.P. ValuLine 8” Fan 745 C.F.M. 1.7 Amps
CAP INLINE DUCT 4" FAN 171 C.F.M 1 Amps
CAN FILTER 50 w/o FLANGE (Fits 8", 10", & 12" Flange)
CAN FILTER 8" FLANGE.
Ordering Next Week.A 2 and 4 Foot 8 Tube HydroFarm T5 Fixtures.
The whole outside and inside will be sheet rocked,and a door added on the outside wall.Each separate interior room will also have there own doors,lined with Mylar and rooms sealed.
All white tubing is 4 inch drainage tubes.Smooth Black Inside.Cost Less then PVC.Gonna Exshast straight out the window trough the crawl space.And Intake from there as well. Gonna add small coin size holes a few at a time and add or increase holes or size until i get the wanted flow and temps.That's the Plan.Shoot me some suggestions.Its framed so that is not changing..Suggestions on the Exhaust and intake will be much appreciated.I hope to dump cool fresh air directly into each room toward the bottoms.On the back wall in the center area I will have a sink with a cabinet below with shelves above it..Over head the Next gen Digital Ballast will mount to the beam.The Can 50 Filter I will decide on where to hang that.
Lay Out.
Top section of the Veg side (left) will be split into 2 sections.One side to fit the HydroFarm 2 foot 8 tube fixture,for the clone machine and recently rooted and potted clones.The other section for storage.Over all size. 26.5 x 57.5 x 42.
Bottom Section.Full Veg-26.5 x 57.5 x 46..4 Foot 8 Tube T5 HydroFarm Fixture.
Flower Room(Right).41.5 x 57.5 x 89..XXXtreme 8 inch Reflector Measurements-43" x 31.5" x 17".Guessing 7-10 plants in this area?I will decide on pot size, I'm sure that will help me decide how many I can fit with out packing it tight.
The 2 T5 Fixtures will go on order next week.Hope to Finnish and be up and running by the end of the month.
good work man, and definitely good luck, hope you get plenty of big harvests
