My first CXB 3590 run...

PerroVerde

Well-Known Member
This is the first run with my newly built CXB 3590 light. The tent is 40" by 40" so a meter squared. The light is 8 CXB 3590 3500k cobs at 50 watts each with 2 hlg 185 1400ma drivers. Also have 12 Cree XP-E far red stars for lights out on a LPC 35 700 driver. Genetics are 5 Mandala Hashberry and the 11 others are Peak Seeds KushBerry (Purple Kush x Peaks Blueberry) 4 different phenos, seeing what's what. The pic is this morning after transplant into coco core late last night. The light is dimmed to a little under half power and the transplants are super happy to be out of the diy bubble cloner and into the coco. When I see new growth I'll flip to 12/12, I know this is a different style then most grow here but I have always liked a lazy SOG. Nutrients are Veg + Bloom and some things (Life +, humatic and fulvic acids, Epson salt) added here and there as wanted or needed...
 

Attachments

BuddyColas

Well-Known Member
This is the first run with my newly built CXB 3590 light. The tent is 40" by 40" so a meter squared. The light is 8 CXB 3590 3500k cobs at 50 watts each with 2 hlg 185 1400ma drivers. Also have 12 Cree XP-E far red stars for lights out on a LPC 35 700 driver. Genetics are 5 Mandala Hashberry and the 11 others are Peak Seeds KushBerry (Purple Kush x Peaks Blueberry) 4 different phenos, seeing what's what. The pic is this morning after transplant into coco core late last night. The light is dimmed to a little under half power and the transplants are super happy to be out of the diy bubble cloner and into the coco. When I see new growth I'll flip to 12/12, I know this is a different style then most grow here but I have always liked a lazy SOG. Nutrients are Veg + Bloom and some things (Life +, humatic and fulvic acids, Epson salt) added here and there as wanted or needed...
I'll follow along. So you are running 3/2/3 on your COBs across 3 heatsinks. What type of heatsinks are you using? Are they passive or active cooled? Also, please share the spacing you used. Thanks.
 

PerroVerde

Well-Known Member
I'm using the Heatsinks USA 5.88 profile passively cooled. At a little over half power now even directly above the cob is barely warm. My spacing is based on my build being 32" x 32" for a 40" x 40" tent and wanting to spread the light as evenly as possible with 8 cobs. On the bars with 3 cobs one in the center and the other 2 are 14" each from the center. The middle bar has the 2 cobs 10" from the center so 20" apart. I move my plants each watering and rotate the taller plants to the outside shorter to the inside... Hope this is the info wanted... Thanks for stopping in... :)
 

Attachments

BuddyColas

Well-Known Member
I'm using the Heatsinks USA 5.88 profile passively cooled. At a little over half power now even directly above the cob is barely warm. My spacing is based on my build being 32" x 32" for a 40" x 40" tent and wanting to spread the light as evenly as possible with 8 cobs. On the bars with 3 cobs one in the center and the other 2 are 14" each from the center. The middle bar has the 2 cobs 10" from the center so 20" apart. I move my plants each watering and rotate the taller plants to the outside shorter to the inside... Hope this is the info wanted... Thanks for stopping in... :)
Thank you. Yes that helps me. (and a great full frontal shot of your build) I have 2 bars for a 2x4 foot grow box and they are ty-rapped together on some PVC pipe. I keep moving them in and out trying to fine tune them before I anchor them to some aluminum angle. So your spacing helps. Did you pick that spacing by using a LUX or PAR meter? Or like many who have symmetry OCD pick round even numbers! Not saying you have symmetry OCD...but some of us do.:roll:

I am about 2 weeks out on my first run with white COBs...and I just got my added 13-watt far red bar built...it will be all ready for next run. What kind of timer and timing are you going to run on your far reds?
 

PerroVerde

Well-Known Member
I looked at successful builds and what would work in the meter squared I have to flower in. I looked at the light spread each cob would lay out with a 90° angle reflector at 18" above the plants. I don't think I'm OCD but I know I'm a procrastinating perfectionist... :) I am running the Apollo 9 titan bigital controls for timers for far reds and the main light. I had to reset my main light timer and reprogram it to have it start turning on my build but no problems since then... I'll be following your grow BuddyColas... :)
 

DISTRESS0R

Active Member
Wowsers nice rig, what sort of PPFD did you calculate in your space running at 50%? or even at full if you have an idea. Id love to do this long term for a new build, but make the centre lights 5000K for vegging. Then as your plants get bigger, you turn on the outer rim for a nice full spectrum combo in flowering
 

Fastslappy

Well-Known Member
Perro ,
did you follow someones thread to build your far red light ? do you have both Far Red & IR ?

do u go 100% coco or do u add stuff
 

Airwalker16

Well-Known Member
I'm using the Heatsinks USA 5.88 profile passively cooled. At a little over half power now even directly above the cob is barely warm. My spacing is based on my build being 32" x 32" for a 40" x 40" tent and wanting to spread the light as evenly as possible with 8 cobs. On the bars with 3 cobs one in the center and the other 2 are 14" each from the center. The middle bar has the 2 cobs 10" from the center so 20" apart. I move my plants each watering and rotate the taller plants to the outside shorter to the inside... Hope this is the info wanted... Thanks for stopping in... :)
I was planning on 2 36" hs''s with 4 cobs each. But the 3 hs''s gives a better spread. Would you mind taking pics of your fixture up close and from a few different angles? I'd like to see how you wired it.
 

littlejacob

Well-Known Member
QUOTE="Airwalker16, post: 12264052, member: 913773"]I was planning on 2 36" hs''s with 4 cobs each. But the 3 hs''s gives a better spread. Would you mind taking pics of your fixture up close and from a few different angles? I'd like to see how you wired it.[/QUOTE]
Bonjour
If you want more spread cut your hs in pieces!!
CU
 

PerroVerde

Well-Known Member
Wowsers nice rig, what sort of PPFD did you calculate in your space running at 50%? or even at full if you have an idea. Id love to do this long term for a new build, but make the centre lights 5000K for vegging. Then as your plants get bigger, you turn on the outer rim for a nice full spectrum combo in flowering
With the power on full I believe the PPFD IS around 940 but I don't have a way to measure that besides Supra's calculations. It may have been better for me to start with less light and my light being farther above the plants, live and learn... :)
 
Top