lets make some colloidal silver and fem some beanz aka selfing my banana puff

How long do you figure itll take to get to 100 ppm?

awhile! lol im at 11 ppm right now. thinking how i can change a few variables to speed it up. its gonna prob take over a month lol i dont have that much time tho

http://www.cancertutor.com/csilver/
Cut and paste from page.

This article will describe a way to make colloidal silver at home. After the first batch of colloidal silver is made, the second and future batches should make one gallon of high quality 6 PPM to 8 PPM (Parts Per Million) colloidal silver in one and a half hours.


The fist batch will take about three hours, since it will not have the benefit of “seeding” the gallon with previously “cooked” colloidal silver (this “seeding” is necessary to create better electrical current in the distilled water). Once the first batch is made, future batches can be “seeded,” so it will take less time to make these batches.


All of the statistics in this article are based on a 400 mA (400 milliamp) power pack. Should someone use a 800 mA power pack, the necessary times will likely be shorter.


sound like 100 PPM is pretty high!

im running 1000ma but wish i had more then 5 volts!

Well, my CS experiment worked. Took about 3 weeks, but I now have a male branch on my female auto.
Messed up my leaves around the branch, but she is doing well.
View attachment 3009055

Bud shot!

View attachment 3009056

So I take it you will pollinate the bud on this plant with the pollen from the male sacks you produced on the same plant is this what is done to make FEMALE SEEDS

I have been curious about making some female seeds of my Genghis Khan Kush Cuttings.

good shit greenthumb!

grow2grow said:

So I take it you will pollinate the bud on this plant with the pollen from the male sacks you produced on the same plant is this what is done to make FEMALE SEEDS

I have been curious about making some female seeds of my Genghis Khan Kush Cuttings.

Click to expand...

Yes, I will pollinate the same plant for some female seeds of the auto. I am also planning on using some of the pollen to get some seeds from the blue dream I'm growing also.

greenghost420 said:

good shit greenthumb!

Click to expand...

Thanks!!

Wow i had no idea it took so long
Nice hermie greenthumb balls are lookin nice!
So your pollinating the blue dream with that herm auto pollen as well?
Do you plan to take the femmed cross back out to autoflower or
Were you just looking for super autos or something?

The blue dream is already growing and I have no more CS to use to convert a branch of her own, so I am going to use the pollen from auto anesthesia to pollinate her also. I should get prob about 25% auto with the rest reg fem seeds.

Hopefully the cross will create a super strain.. I could sure use a super strain, cause my tolerance is so high.
So the genetics should be:
Northern Lights
Black Domina
Blueberry and Haze strains¿?
~~~[ruderalis]~~~

I suspect autoflowering is not a 100% dominant trait but in my own crosses
Ive found the f1 to not carry any autos at all. (Ive never ran a huge number of
F1 auto x photo but like i said ive not seen any, maybe the rudy used in my lines
Is a completely recessive trait but ive heard of autos in the f1 and "super autos"
I suspect may be nothing more than a plant with partial auto dominance
Which may be found in the initial cross, i dont know tho so im very curious
To see what comes of that cross!
I feel you on the tolerance i always like to alternate between bud and dabs on
Different weeks and every now and then go completely cold turkey
It really helps me with keepin tolerance at bay.
Oh and only smoking towards the latter part of the day i dont wake and bake
Anymore because i get too groggy and not as high at the end of the day when i need it lol

greenghost420 said:

Youll be watching right? Then pay attention...lol

Click to expand...

Just wondering where you're at with the low voltage CS generator, my attention span does not cover 10 days . I feel much better now about the $50 transformer I bought to replace the 3 9v batteries I was using.

My water was evaporating so i had it up to 16 before topping it down to 12. I checked last night it was 17... At 18 right now lol i dont think you needed to grab that transformer tho. I bet if i had 12v at 1a id be done, or close

greenghost420 said:

My water was evaporating so i had it up to 16 before topping it down to 12. I checked last night it was 17... At 18 right now lol i dont think you needed to grab that transformer tho. I bet if i had 12v at 1a id be done, or close

Click to expand...

You are at 18 PPM (that is IF you have filtered the solution to remove the byproducts of the process) after ONLY 10 days simply F'in amazing. Like I told you, your system is underpowered and will NEVER achieve the density you desire/need to produce female pollen. With my DIY system using 27 volts I produced 3 cups (3x the amount you are trying to make) of 45 PPM colloidal silver in about 4 hours. I am extremely pleased that I invested in the proper equipment and am looking forward to producing another series of batches in a few weeks to make another batch of female pollen from a different strain using the transformer at the recommended 30 volts. Another consideration as you are making your CS over an extended period of time is exposure to light as it changes the chemical composition. additionally taking this long to produce a single cup of CS will not provide enough to spray your plant for the required 2 -4 weeks.

The point of getting the higher ppm is to only treat a few times, not weeks. So my cup of cs will suffice.

I know my bottle said 50ppm and it took about 3 weeks. Probably a little sooner, but I wanted to be certain that it turned, and it did. So around 50ppm works in about 3 weeks, but I would think it is also how the strain reacts to it.

Here is my converted branch



Here is a bud from the same plant. Auto Anesthesia

greenghost420 said:

The point of getting the higher ppm is to only treat a few times, not weeks. So my cup of cs will suffice.

Click to expand...

If you say so

i didnt say so, the article said so. im just sharing...

My male branch decided to open without permission.


I got pissed off and cut off the branch. I think I may have lost quite a bit of pollen. In hindsight I should have put a bag over the branch or cut it and put it in a glass of water angled over a plate or something else to catch the pollen. I was able to brush a bit of pollen on a flower, but I'm not sure how that works with getting the two to bone.

I have the rest of the sacs inside a ziplock bag, not sure what to do with them yet.