IF you are new to LED and want help choosing what to buy, POST HERE!

Status
Not open for further replies.

Abiqua

Well-Known Member
so do you have to point these crees a certain angle>? what works best, directing the light from the side, by running them sideways, or shine them directly down, by hanging them verically? I know the expensive led lighting systems have to be angled properly so it made me wonder
Yeah, at this point, I think you're right. I'm going to get a 2 or 3 bulb splitter, some cord and put my own thing together with some Cree bulbs. I might choose something else later on down the road, but it seems like the best choice at this point. Thanks for the suggestion. :)

Read this page, only one about 1/2 way down [Tags/GG] did these measures about 6 months ago. This will give you a good idea of their power and so forth....
https://www.rollitup.org/t/tags-high-efficiency-lighting-garden.676858/page-23


Don't use the bulb splitter, terrible umols. With or without CFL's.
 

tstick

Well-Known Member
Wow! Thanks! I was just looking at the splitters! HA! Nice timing. Yeah the drop in umols was significant enough for me to warrant going with multiple single-bulb fixtures…or maybe trying to wire something together *gasp!* by myself….

Any suggestions for what kind of fixture or fixtures to use?

Thanks
 

Abiqua

Well-Known Member
Wow! Thanks! I was just looking at the splitters! HA! Nice timing. Yeah the drop in umols was significant enough for me to warrant going with multiple single-bulb fixtures…or maybe trying to wire something together *gasp!* by myself….

Any suggestions for what kind of fixture or fixtures to use?

Thanks
I have some different types of homemade fixtures I made a while ago in my sig... one uses an old hood from a piggyback ballast off a 1000w MH lamp and the others are stripped down Home Depot 3 light bath fixtures....

[I haven't updated in a while, threw a disk out 8 weeks ago or so and just starting to be mobile again.....]

Capn' use to use these and they are dirt cheap...a 4 light cluster, they make a 3 and 2 way too..
http://www.mylampparts.com/Products/Four-Light-Cluster---Keyless__SL19156.aspx



 

Abiqua

Well-Known Member
my bad...just realized that none of my photos are showing from the old albums. schucks, have to go back in photo history and start a new thread in the Micro section maybe :peace:
 

slitzer

Member
Looking to purchase A51 LED's
What do you guys suggest for a 2x4x5 tent, utilizing a (5) 5gal Bucket URDWC system.
Mostly, I will flower in it. I was looking at (2) of the RW-150 or should I go (1) XGS-190 and (2) RW-150, or (1)XGS-190 and (2) RW-75, man decisions, decisions. Please guide a fellow here. I've read a lot about A51 lights here at R.I.U but I'm still confused on what combo. Are (3) LED's to much for that grow space. Thanks for the help.
 

Bad Karma

Well-Known Member
Looking to purchase A51 LED's
What do you guys suggest for a 2x4x5 tent, utilizing a (5) 5gal Bucket URDWC system.
Mostly, I will flower in it. I was looking at (2) of the RW-150 or should I go (1) XGS-190 and (2) RW-150, or (1)XGS-190 and (2) RW-75, man decisions, decisions. Please guide a fellow here. I've read a lot about A51 lights here at R.I.U but I'm still confused on what combo. Are (3) LED's to much for that grow space. Thanks for the help.
You would only need two lights to cover your 2x4 grow space.
The RW-150 yields a little better than the XGS-190, due to the deeper red spectrum.
Otherwise, they're pretty similar, except for the color of the light emitted.
If you're looking for the bigger yield, go with two RW-150's.
If you're interested in seeing what an all white LED light can do, go with two XGS-190's.
The bigger issue for you is height, as you need 18"-24" between the light, and the canopy.
If you can manage that, you'll be all set.
Good luck.
 

slitzer

Member
You would only need two lights to cover your 2x4 grow space.
The RW-150 yields a little better than the XGS-190, due to the deeper red spectrum.
Otherwise, they're pretty similar, except for the color of the light emitted.
If you're looking for the bigger yield, go with two RW-150's.
If you're interested in seeing what an all white LED light can do, go with two XGS-190's.
The bigger issue for you is height, as you need 18"-24" between the light, and the canopy.
If you can manage that, you'll be all set.
Good luck.
Thanks, I knew the height was an issue and I know the RW-150's can get a little closer than the XGS-190. I was limited by height where the tent is.
Would (3) of the RW-150 be overkill. I'm going to LST and SCROG it all. And I'm in no hurry.
 

Bad Karma

Well-Known Member
Thanks, I knew the height was an issue and I know the RW-150's can get a little closer than the XGS-190. I was limited by height where the tent is.
Would (3) of the RW-150 be overkill. I'm going to LST and SCROG it all. And I'm in no hurry.
You're welcome.
Yes, three RW-150's would be overkill.
 

PetFlora

Well-Known Member
Thanks, I knew the height was an issue and I know the RW-150's can get a little closer than the XGS-190. I was limited by height where the tent is.
Would (3) of the RW-150 be overkill. I'm going to LST and SCROG it all. And I'm in no hurry.
You might also consider BML Horticulture bars

My led tent is 2 x 4 x 5

2 @ 3ft bars will be here today, which I am adding as supplements to my 2 ufo90s (3500/5000) that were gifted by Jeff at A 51

The bars can be purchased individually, and in various lengths. This can be helpful with budget constraints, as mj does not need massive light during veg.

I think these bars can be much closer to the plants + have passive cooling


Will post pics to my thread as soon they get here
 

slitzer

Member
You're welcome.
Yes, three RW-150's would be overkill.
email from A51:
There's a few good options for you.
If you're doing mostly flowering, either the 75 or the 150 is the best option. 3-4 of the 75s, 2 of the 150s, or a 150 and a 75. Personally, I'd go with 3 of the 75s.
Regards,
Jeff

what you guys think?
I'm still leaning towards the (2) 150's for more watts and better coverage I think.
 

Bad Karma

Well-Known Member
email from A51:
There's a few good options for you.
If you're doing mostly flowering, either the 75 or the 150 is the best option. 3-4 of the 75s, 2 of the 150s, or a 150 and a 75. Personally, I'd go with 3 of the 75s.
Regards,
Jeff

what you guys think?
I'm still leaning towards the (2) 150's for more watts and better coverage I think.

Jeff, aka Eraserhead here on RIU, knows his stuff, and always gives honest advise. Three RW-75's will probably give you the most even coverage, but I would think two RW-150 will give you better results in flower. Either way, your garden will be fully illuminated, so the choice is yours, sir.
 

Abiqua

Well-Known Member
Did my previous grow with a CFL but I am planning to switch to a LED for next grow.
I saw a few LED lights with a Red/Blue spectrum dimmable feature. Is it useful ?
Also do these lenses called 3x lens on light better for flowering ?

With a max budget around $100, is more power important or the secondary lenses

http://www.northerngrowlights.com/aurora-ufo-x90.html
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=111334211461

Realistically it is the same light, The JoyHydro 180w might have a little more than 87w's at the plug, and then again it might not.

The lenses can help penetration depending on their angle but more than likely are just getting in the way and taking away 10% of the light output thru diffusion.

Then you have the funky spectrums, no doubt that they will veg/flower, but optimally?

At least with CFL you know your spectrum.
 

canadian1969

Well-Known Member
To my understanding 90 deg lenses are the most efficient optically (or in other words, least detrimental) Apparently anything else (60,120) can create significant losses. The size shape and material the optics are made from are all factors. Google LED OPTICS EFFICIENCY etc.
 
Status
Not open for further replies.
Top