Can somebody please help me get the driver dialed in. I am running 3 Luminus CMX22 per driver. All the guides I am finding are for series drivers but this driver is run in parallel and has 2 dials Vo and Lo. I am pretty sure with my setup I can just crank them both up all the way for max output but want a better understanding on what is correct. Would I dim with Vo or Lo as both seem to have the same effect?
My understanding is Vo limits the max voltage and Lo is for the current. I metered the voltage while adjusting and it looks like the unit can go all the way up to 52.5 volts.
I was thinking I should raise Vo all the way up and dim with Lo but that won't dim all the way. Dropping Vo dims further. However just using the Lo dial is all I will probably ever need to do. I think the Vo dial would be more important if I was running lower voltage cobs to limit their max.
Is my understanding correct? I don't want to break something.
My understanding is Vo limits the max voltage and Lo is for the current. I metered the voltage while adjusting and it looks like the unit can go all the way up to 52.5 volts.
I was thinking I should raise Vo all the way up and dim with Lo but that won't dim all the way. Dropping Vo dims further. However just using the Lo dial is all I will probably ever need to do. I think the Vo dial would be more important if I was running lower voltage cobs to limit their max.
Is my understanding correct? I don't want to break something.