diy cob specs, missing anything?

B

beansnfranky

New Member
Single cob for single auto, hoping to go w a quiet setup, few questions on specs.

COB 3500K: clu048-1818c4 ver6 cri 90+ 3500k or clu048-1812c4 v6 cri 90+ (ver6 preferred over ver5?)
Driver: Mean well HBG-60-? (1050 vs 1400 vs 2100 and P or non P, does it include a power cord?)
Connector: BJB GmbH & Co. KG 47.319.2033.50 or Ideal 50-2204CT(solderless?)
Heat sink: Moduled Mega 13450-B-HBG
-part #s from cdiweb

Good setup, missing anything, would I need a heat transfer agent bw cob and heat sink? Whats involved w assembly, any soldering or drilling, or simply route wires and tighten screws?

Let me know if you need more info, thanks for any advice.
 
diyled

diyled

Well-Known Member
Swap out the 1212 for a cxm22
use a hbg60-1050. Will go 75w.
Doesn't matter which holder,you have to solder abit of solid core 18awg onto the hbg drivers dc wires anyway.
Solder pad or Arctic thermal paste.
You are missung 4x 25mm bolts and 4x10mm spacers.
 
B

beansnfranky

New Member
diyled said:
Swap out the 1212 for a cxm22
use a hbg60-1050. Will go 75w.
Doesn't matter which holder,you have to solder abit of solid core 18awg onto the hbg drivers dc wires anyway.
Solder pad or Arctic thermal paste.
You are missung 4x 25mm bolts and 4x10mm spacers.
Click to expand...

Appreciate the reply diyled, followup question, cdi doesnt seem to sell luminus, looks like citizen 1818 may be comparable, am I wrong or would that suffice? I guess ver 6 over 5 and cri 90 over 80? Was hoping to go through one retailer for simplicity but could always order the cxm22 separately.
 
You must log in or register to reply here.
Top