column size?

Fadedawg

Fadedawg

Well-Known Member
The flow through the center of the column is slower than the center and the larger the column, the more pronounced the difference.
 
C

cookie master

Well-Known Member
is that mold? Not only easier but safer, I feel naked when running and if I could get it all done at once then its better.
 
C

cookie master

Well-Known Member
I dunno that compund you mentioned but it sounds like botyritis? Maybe i should do initial runs through a 1.5 column and then soak it ?
 
Fadedawg

Fadedawg

Well-Known Member
cookie master said:
is that mold? Not only easier but safer, I feel naked when running and if I could get it all done at once then its better.
Click to expand...
The essential oil that we are extracting contains molecules ranging in length from about C-10 (carbon atoms) to C-30. The C-30 sized molecules include chlorophyll, anthro cyanin plant pigments, and plant waxes, all of which are undesirable in an extract.
 
C

cookie master

Well-Known Member
Thanks Fade, since im about to upgrade can you help me out and give me a link to some good info on a 2017 closed loop system? im incompetent searching and come up with your old system. I may just stop spraying out into the air and buy a can for the bottom and make a passive system, or ill buy components which still be upgradeable in the future. I already have a 1.5 inch closed column that I do a 4 minute soak on.
 
C

cookie master

Well-Known Member
Im doing daily research, my system was closed column, not open. So far its a 3 inch dewax column and couple of filters and a reducer that mates up to my valves. Im probably adding a 10 inch base with a lid for valves to a tank and run a passive system. if you start with a full tank can you distill without a secondary container?
 
Fadedawg

Fadedawg

Well-Known Member
cookie master said:
Thanks Fade, since im about to upgrade can you help me out and give me a link to some good info on a 2017 closed loop system? im incompetent searching and come up with your old system. I may just stop spraying out into the air and buy a can for the bottom and make a passive system, or ill buy components which still be upgradeable in the future. I already have a 1.5 inch closed column that I do a 4 minute soak on.
Click to expand...
cookie master said:
Im doing daily research, my system was closed column, not open. So far its a 3 inch dewax column and couple of filters and a reducer that mates up to my valves. Im probably adding a 10 inch base with a lid for valves to a tank and run a passive system. if you start with a full tank can you distill without a secondary container?
Click to expand...
I would suggest checking out Terpp Extractors or BVV for the base unit.

To distill, you need a clean receiving tank and a pot/trap to inject raw butane into and distill refined butane out of.
 
You must log in or register to reply here.
Top