Cheap Way to make CO2 for your grow

excellent post but lets make it simpler!!! why all the hoses and extra jugs just to lock out oxygen?

i just took a jug punched a hole in the top and epoxied a cheap plastic check valve in there. the same kind of valve aquarium filters use that prevent the water from backing up into the air pump. two dollars at wal mart

http://www.marinedepot.com/ps_viewitem.aspx?idproduct=AZ0031&child=AZ0031&utm_source=mdcsegooglebase2&utm_medium=cse&utm_campaign=mdcsegooglebase2&utm_content=AZ0031


something like that.


now you don't have hoses and jugs, heck in my set up I need four of these babies that would leave my place looking like a mad scientist lab form back to the future or something!!

the heat yeast makes is negligible and does nothing. just the creation of co2 itself will force all the air out of the jug in a few minutes and then your valve will be sending out JUST co2 and not allowing air back in

once you have done this you have a very easy way to attach a hose to your co2 generator and run those over and through the growing area so that you get a good coverage.

my 2 cents
 

Lobotomist

Well-Known Member
Excellent! I'm glad that this method is getting recognition! I've used it every time and it works great! :bigjoint:
 

cambu82

Member
Here is a picture of a simple fermentation setup that I have used. I keep a towel wrapped up on the outside of the glass. The yeast seem to work better in the dark.
hi were can i buy the thing that you put in the top of the can or the name for me to search thanks for sharing !!!
 
;-)hey everyone, just to give you an idea of how quick the co2 rises in a room. I have a digital meter that reads the ppm every 5 seconds, just breathing in the room brings up the levels 300 ppm in seconds. the average ppm are 389 in my area but when i an in the flower room for 10 minuets after the lights turn off the level rises to 1000 ppm. So if your room is in your house you could use your house fan on your heater controls to bring co2 into the room when your home. just something t think about.
 

tyke1973

Well-Known Member
The best way that i have come up with to make a good co2 generator for my tent grow is to use my camping sove have it on low when the lights are on but turn all the fans off leaveing it running for harf hour at a time.It cost 10 pound for 2 refills and i may use 6 for each flowering that i do but it increses the yeild by at least 20%.Also i found a god send some of the older folk out there may remember a product called soda stream this is the perfect tool for makeing tap water into gas filled water the plants love it it is full of co2.
 

godsbestgift

Active Member
you can use Seltzer water but i didn't want to mention it because you have people on here who swear you shouldn't give plants Seltzer water and they say the roots don't need CO2, just oxygen.... when in reality they are WRONG... I am not an expert grower but the reason i know they are wrong.. 1) i tried it and it didn't harm my plants at all 2) i looked up a study done with 2 plants Water Vs. Seltzer Water... it showed a chart and the experiment was done over a series of months...so it wasn't a bullshit study... and the plant fed Seltzer Water actually grew healthier and bigger than the plant that was fed water... (it even became smarter.... meaning... when certain leaves started to die when they conducted a dry experiment... the plant started to grow leaves at the bottom instead of the top like every plant that is fed water) because the theory is since plants roots do need oxygen... the bubbles are feeding both to the roots and people didn't know roots can benefit from CO2 because of the whole plant leaf using CO2 thing.... and what was also a plus sign... the bubbles help loosen dirt around the plants roots so they do have the room to breathe easier.... there are many that will dispute this... but like i said... i looked it up for myself because you can't depend on weed growers to know and understand all aspects of plant life.... you also need people who know plants.... just make sure its seltzer water with NO SODIUM... maker sure its all zeroes in the nutrional column on the back of the bottle.... oh yeah.... there are people on here that will say don't water your plants seltzer water...just spray it... i don't know anything about this or if it works... but i do know you can give your plant seltzer water as long as there's NO SODIUM
Damn bro that was one hell of an elaboration. I can see truth to that, but I would give a test run to some midgrade 1st to see how it reacts. U must be smokin some good shit to get into that so passionatly bro NO 2 SODIUM!
 
K.I.S.S CO2

What I did works fine and it's simple. I took a 5 gallon plastic water jug (office cooler type) and filled it about 25% full of lukewarm water, added about 2 cups of sugar and a couple teaspones of bakers yeast. I took a small hypodermic needle and stuck it through the plasic jug, put a sealant around it and ran a tube from the needle into a jug of water (mostly just to see how much CO2 was being produced). It produces about one bubble every second. I bought a bag of round ballons and stretch a ballon over the top. This is an air seal and also acts as a preasure regulator. If the balloon is standing up it's making CO2. If I give it a shake it bubbles like mad and the balloon gets much bigger. When the CO2 production subsids I add another half gallon of water and another cup of sugar and shake. So far it's been producing CO2 right along. I have no idea what concentrations I'm getting but it certainly better than nothing and the plants seem to like it.

Heres a pic from yesterday and one from 9 days ago




Here is the same plant above less than two days later.



I can't wait until the really start growing.
 
Yeah I know its been a year since anyone has posted anything here but a CO2 generator is a gas burning carbon dioxide generator. Now some jack ass decides to call his hootch setup a generator, as people have been doing making wine for how long. So not that it matters, but here in colorado we have a bunch of idiots attempting to grow medical cannabis, and they are spreading poor information, bugs and diseases. So I was here because I am going through a tank every 4 days keeping the ppm at 1500. And its to hot to run my generator. I thought Id try to find out the sugar/yeast ratio, and I see people calling this a generator. Giving no thought to the people who may be trying to search google for information on real generators, then being linked to this shit. So you cheap ass fuckers want to play with co2 try a tank AND monitor! otherwise just go breath on them... I will post again on what the ppm is in a room roughly 10 x 10 with BREWING the co2. at about 2 cups sug and a tsp yeast per gallon, pretty sure Im gonna want to up to a 5 gallon.
 
Hi, just wanna know where you bought the release bulb on your fermentation setup, the one on top that looks like a plastic thingy( transparent)
 

Tennis1

Active Member
I've been doing this now (thanks to you) for the last 3 weeks of which have been in the middle to end of flower and feel like its been an overall improvement. My buds seem tighter and larger than they were headed 3 weeks ago. Yesterday, I had to turn the air conditioner off. I forgot about it and 2 hrs later it was 105 degrees in the room and the plants were acting as if nothing was happening. Cool its working. I just use the "Piss Jug" technique. Water, shit load of cane sugar, and 2tbs yeast. got 4 jugs in a 4x8x6 room.
 

SativaMe@420

Well-Known Member
Baking soda/acid is a good system, but it is ultimately fairly expensive. Furthermore, you also release acetate ions/salts, as well as other volatiles from the vinegar (which is not a pure solution of acetic acid, of course). They prolly won't kill your plants, though they might. Instead they will likely make it smell or taste bad.

What is a better way to get your carbon dioxide? Fermentation. Acquire some brewer's yeast if you can. The types of yeast you can use are in order of what is best, though all are acceptable:

Champagne
Wine
Ale
Beer
Baker's

Rig up a simple fermentation chamber with airlock. The airlock is designed to keep the atmosphere anaerobic while releasing your good CO2. Fermentation chamber should be any airtight container with top. It could be a 2 liter Coke bottle, for example. Drill a hole in its top and glue in some plastic tubing, making sure to create a good seal. An epoxy is prolly what you'll need to do it. Run that tube into a smaller, halved bottle: a water bottle works well. Place the tube at the exact bottom and glue it there such that the outlet of the tube faces the wall (not the bottom) and is not blocked (by glue, the wall, your mouse, whatever). Fill that up with water, about an inch and a half above the bottom.

The mechanism is all set up, now set up the fermentation. Fill the bottle with about a 20% solution of glucose (dextrose) by mass and place a few tsp. of yeast in that jaunt. Placing the yeast in some warm water for half an hour prior with some sugar is a good way to jump-start the process. Using those six-carboned sugars, you get optimum results, but other sugars can be used. In general, you'll likely find the 5-carbon variety (fructose: corn syrup, eg.) or the polysaccharide (sucrose: cane sugar). In these cases, its ok to add a little more sugar, no more than 25%. Champagne yeast can tolerate more. Brewers yeast, you may want to shoot for less. Cap that jaunt with the tubing/cap system you rigged up.

Here's the principal, its perty simple: The yeast use the sugar to make their energy (ATP). However, in absence of oxygen, the metabolic pathways can't be completed, and alcohol is excreted as waste. This is disadvantageous to the yeast, but hey, who cares? They also release carbon dioxide. For every equivalent of glucose or dextrose, the yeast produces two equivalents of carbon dioxide and alcohol. If other sugars are used, the process is slightly less efficient due to the early metabolics that get done to prepare it, or the inefficiency of metabolic/synthetic shunts (biochemical shite, its unimportant, but fun if you are nerdy). The carbon dioxide is good for your plants: its the objective. The alcohol is bad. It increases in concentration in the fermentation vessle and DOES NOT leave in any way. Over time, the yeast poisons itself with its own waste. Better yeasts (as per the above sheet) survive longer and make more carbon dioxide. Hence the reason for increasing the sugar, if you'd like (the difference is probably just about marginal if at all, so don't dwell on it).

So what does this mean for you? A mole of glucose is around 180 grams. Thus, a 20% mass solution will produce slightly more than TWO MOLES (2.2 to be be exact) of of gas per liter. At standard temperature and pressure, and if you are growing, that's what you want, you will get around 50 liters of pure carbon dioxide from this method, over the time period of about 2-4 weeks. Great stuff.

Problems: You can tell the yeast are dying when the bubbling through the airlock subsides. No way around it, you need to whip up another fermentation mixture. Optimally you would do this every week and a half, while the yeast are at their maximum productivity. Using cane sugar and baker's yeast this is a crazy inexpensive endeavour.

Can you kill the plants with too much CO2? Most likely not. They breathe it as air, and they really only need oxygen (the only other thing they really take from the air) to run their ETC and some other minor metabolic processes. They get this from the water, believe it or not. Also they respirate as much 02 as they take in CO2. No problem, really. Time when killing the plants from carbon dioxide have been reported is likely either in extreme cases (approaching NO oxygen in the air and thus water) or due to the poor downsides to using other carbon producing methods (acidic air, contamination of various sorts, etc.). On the other hand, your plants would optimally have about 3 times as much carbon dioxide as would be in the atmosphere. That rings in at around 6%, so not that much, and in all likelihood, its gonna be difficult to bring it up to these levels. Happy planting.
Thank you, Thank you, THANK YOU! Ive been wanting a cheap easy way to supplement CO2 for my plants and this is absolutely perfect. So would it be best to make one big fermenting vessel with several tubes going to each plant or is it better to make smaller individual vessels for each plant? It would seem easier and more practical to make one big one though. I'm the kind of learner that dose best if I have a visual reference so if possible could you please post some pictures showing the vessels, air lock, tubes and how they connect? I would be very grateful. Thanks again and stay green.

PS. I "liked" your post but if there is another way to give you reputation points or something (Ive heard of this before but I don't know how to do it or what it really is) let me know because you deserve it my friend.
 

SativaMe@420

Well-Known Member
excellent post but lets make it simpler!!! why all the hoses and extra jugs just to lock out oxygen?

i just took a jug punched a hole in the top and epoxied a cheap plastic check valve in there. the same kind of valve aquarium filters use that prevent the water from backing up into the air pump. two dollars at wal mart

http://www.marinedepot.com/ps_viewitem.aspx?idproduct=AZ0031&child=AZ0031&utm_source=mdcsegooglebase2&utm_medium=cse&utm_campaign=mdcsegooglebase2&utm_content=AZ0031


something like that.


now you don't have hoses and jugs, heck in my set up I need four of these babies that would leave my place looking like a mad scientist lab form back to the future or something!!

the heat yeast makes is negligible and does nothing. just the creation of co2 itself will force all the air out of the jug in a few minutes and then your valve will be sending out JUST co2 and not allowing air back in

once you have done this you have a very easy way to attach a hose to your co2 generator and run those over and through the growing area so that you get a good coverage.

my 2 cents
+1, excellent upgrade to an awesome idea, I love it here
, this place and you guys rock!
 

joeweedo

Member
VERY USEFULL INFO THANKS ALOT ,

BUT I NEED UR ADVISE PPL . i have a direct intake from outside air (natural), do i need co2 generator , ?? ?
 

DreamB0x

Member
Hey! Thanks a lots for this great method!
I made up a batch myself last night and it's a charm - 3 liter bottle with 1,5lt water; 1 1/2 tsp yeast and 1 1/2 cup sugar (brown, as I ran out of crystal) and an addition of a bunch of raisins! I'm guessing it was a big success by the temperature rise - ~2 degrees C which is quite a lot I think! My question is - Is it possible to determine how much the RPM has risen from the temperature amplitude? It would be a perfect way to control the level with those DIY generators if a calculation is possibleView attachment 1810000.
 

elduece

Active Member
A 1/2-3/4 teaspoon of baking powder for every pound of sugar will prolong fermentation for up to 3 weeks instead of 1 week without the baking powder. Just saying.
 

urgod

Well-Known Member
best way for CO2 is to use your water heater. just route some of your exhaust to your grow room with a CO2 PPM controller. set it at like 1200ppm and run it on a inline duct fan. its virtually free (besides the controller) you can use a rigged computer fan too if you want
 

artofit

Member
Baking soda/acid is a good system, but it is ultimately fairly expensive. Furthermore, you also release acetate ions/salts, as well as other volatiles from the vinegar (which is not a pure solution of acetic acid, of course). They prolly won't kill your plants, though they might. Instead they will likely make it smell or taste bad.

What is a better way to get your carbon dioxide? Fermentation. Acquire some brewer's yeast if you can. The types of yeast you can use are in order of what is best, though all are acceptable:

Champagne
Wine
Ale
Beer
Baker's

Rig up a simple fermentation chamber with airlock. The airlock is designed to keep the atmosphere anaerobic while releasing your good CO2. Fermentation chamber should be any airtight container with top. It could be a 2 liter Coke bottle, for example. Drill a hole in its top and glue in some plastic tubing, making sure to create a good seal. An epoxy is prolly what you'll need to do it. Run that tube into a smaller, halved bottle: a water bottle works well. Place the tube at the exact bottom and glue it there such that the outlet of the tube faces the wall (not the bottom) and is not blocked (by glue, the wall, your mouse, whatever). Fill that up with water, about an inch and a half above the bottom.

The mechanism is all set up, now set up the fermentation. Fill the bottle with about a 20% solution of glucose (dextrose) by mass and place a few tsp. of yeast in that jaunt. Placing the yeast in some warm water for half an hour prior with some sugar is a good way to jump-start the process. Using those six-carboned sugars, you get optimum results, but other sugars can be used. In general, you'll likely find the 5-carbon variety (fructose: corn syrup, eg.) or the polysaccharide (sucrose: cane sugar). In these cases, its ok to add a little more sugar, no more than 25%. Champagne yeast can tolerate more. Brewers yeast, you may want to shoot for less. Cap that jaunt with the tubing/cap system you rigged up.

Here's the principal, its perty simple: The yeast use the sugar to make their energy (ATP). However, in absence of oxygen, the metabolic pathways can't be completed, and alcohol is excreted as waste. This is disadvantageous to the yeast, but hey, who cares? They also release carbon dioxide. For every equivalent of glucose or dextrose, the yeast produces two equivalents of carbon dioxide and alcohol. If other sugars are used, the process is slightly less efficient due to the early metabolics that get done to prepare it, or the inefficiency of metabolic/synthetic shunts (biochemical shite, its unimportant, but fun if you are nerdy). The carbon dioxide is good for your plants: its the objective. The alcohol is bad. It increases in concentration in the fermentation vessle and DOES NOT leave in any way. Over time, the yeast poisons itself with its own waste. Better yeasts (as per the above sheet) survive longer and make more carbon dioxide. Hence the reason for increasing the sugar, if you'd like (the difference is probably just about marginal if at all, so don't dwell on it).

So what does this mean for you? A mole of glucose is around 180 grams. Thus, a 20% mass solution will produce slightly more than TWO MOLES (2.2 to be be exact) of of gas per liter. At standard temperature and pressure, and if you are growing, that's what you want, you will get around 50 liters of pure carbon dioxide from this method, over the time period of about 2-4 weeks. Great stuff.

Problems: You can tell the yeast are dying when the bubbling through the airlock subsides. No way around it, you need to whip up another fermentation mixture. Optimally you would do this every week and a half, while the yeast are at their maximum productivity. Using cane sugar and baker's yeast this is a crazy inexpensive endeavour.

Can you kill the plants with too much CO2? Most likely not. They breathe it as air, and they really only need oxygen (the only other thing they really take from the air) to run their ETC and some other minor metabolic processes. They get this from the water, believe it or not. Also they respirate as much 02 as they take in CO2. No problem, really. Time when killing the plants from carbon dioxide have been reported is likely either in extreme cases (approaching NO oxygen in the air and thus water) or due to the poor downsides to using other carbon producing methods (acidic air, contamination of various sorts, etc.). On the other hand, your plants would optimally have about 3 times as much carbon dioxide as would be in the atmosphere. That rings in at around 6%, so not that much, and in all likelihood, its gonna be difficult to bring it up to these levels. Happy planting.
:leaf:An important foot note here is that CO2 should be provided during light hours only. Presence of CO2 during dark periods is counterproductive and can stunt the growth of your plants. Oxygen is needed during dark hours and the good source, of course, is the good old fresh air. Air is still free as far as I know but oxygen is regulated by the feds. Surprised, are you? What else did you expect ???;-) Also, any type of contained fossil fuel combustion system remains a valid source of co2 for your plants (butane or propane lamps are good ideas).
 
Top