Deusracing
Well-Known Member
Just harvested most of it 18.9 ounces trimmed and manicured. Leaving a few branches to get riper
400w Club-Show Off Your 400w Pride And Joy
- Thread starter upinchronic1
- Start date
East Coast
Well-Known Member
From a 400w setup. This plant had a hard start to life - but it got there in the end......random NZ strain. 1/4 of the plant was taken 1 week ago.
Dogenzengi
Well-Known Member
Great Looking Buds!
Dogenzengi
Well-Known Member
Some shots of my last plant at the end of Flower and a single pic of the longest Bud after drying.
Dogenzengi
Well-Known Member
The boards new photo posting keeps doubling my pix??
jondamon
Well-Known Member
Like I've mentioned time and time again, I don't have mother area capabilities any more. I do have more HSO BD seeds so here's hoping.
Let me see if I've got any more pics of her and her leaves.
Also Had to show the main cola of the auto.
Attachments
glockdoc
Well-Known Member
jeez man great work with that.. thats just 1 plant? keep up the good work dogen
ah no mom room, that sucks.. no room for even a cardboard box and a 65w?!!?
you got some solid bud packing on that, u might wanna cling on to that pheno you got
jondamon
Well-Known Member
Well I might have a seed starting box etc.
Might rip a clone from the lower growth on the clone I took.
Then give it to my "guy" to mother for me.
J
glockdoc
Well-Known Member
yea that works ... thats just as good
glockdoc
Well-Known Member
yea i use a 2.5 ft tall 1.5 ft wide and deep cardboard box right now for my aero cloner..the cloner is a 5 gal bucket and with that i can still fit probably about 6-8 solo cups or 10 20 oz bottles
i use 1 65 w cfl. clones been in the cloner for awhile now so there is some major root mass at the moment and the clones are growing great in the thing, figure id try to flower in it with small clones..
i built a bubble cloner that takes up less, its extremely ghetto rigged, but the benefit of its engeneering is that i use black plastic and poke holes in the to slip the clones in; so as many holes i poke, thats the number of cuts it can hold as opposed to the aero cloner which only can clone 8 at a time
i use 1 65 w cfl. clones been in the cloner for awhile now so there is some major root mass at the moment and the clones are growing great in the thing, figure id try to flower in it with small clones..
i built a bubble cloner that takes up less, its extremely ghetto rigged, but the benefit of its engeneering is that i use black plastic and poke holes in the to slip the clones in; so as many holes i poke, thats the number of cuts it can hold as opposed to the aero cloner which only can clone 8 at a time
Dogenzengi
Well-Known Member
Yea Glockdoc,
I flower One plant at at time, I'm flowering my 4th plant.
The last plants final weigh in was 5 ounces dry.
Just starting the cure that batch.
The Plant before the 5 Oz. was 8 Oz. dry before that It was my first ever at just under 7 oz dry.
This one I just started is the last of the plants started on 7/2013.
It is the largest by far I have stuffed it in my tent.
I grow them out and feed them like a race horse!
Just passed one year on the board in April, but my first seeds were sown in July.
I am working with an Unkown strain, I had three females the last is in the tent.
2 months ago I established a new crop in my veg, 11 clones same Unkown plant.
It's a Sativa or Sat dom it only takes 9 weeks to Flower, it starts to get dry on the branch before the 10 th week.
It a Low Smell weed with a Strong Buzz with lung expansion.
I can't say it tastes especially great when smoked ( sort of rough) ,
it's not like anything I have ever bought
but It smells awesome in the grinder and kicks my Smokin Ass!
After curing a joint burns nice and slow and won't go out for almost a minute in the ashtray.
Not sure what I am doing wrong but I have a solid list of what works.
I am blessed with good luck, I am very attentive to my garden!
I love my Girlies!
Bless,
DZ
I flower One plant at at time, I'm flowering my 4th plant.
The last plants final weigh in was 5 ounces dry.
Just starting the cure that batch.
The Plant before the 5 Oz. was 8 Oz. dry before that It was my first ever at just under 7 oz dry.
This one I just started is the last of the plants started on 7/2013.
It is the largest by far I have stuffed it in my tent.
I grow them out and feed them like a race horse!
Just passed one year on the board in April, but my first seeds were sown in July.
I am working with an Unkown strain, I had three females the last is in the tent.
2 months ago I established a new crop in my veg, 11 clones same Unkown plant.
It's a Sativa or Sat dom it only takes 9 weeks to Flower, it starts to get dry on the branch before the 10 th week.
It a Low Smell weed with a Strong Buzz with lung expansion.
I can't say it tastes especially great when smoked ( sort of rough) ,
it's not like anything I have ever bought
but It smells awesome in the grinder and kicks my Smokin Ass!
After curing a joint burns nice and slow and won't go out for almost a minute in the ashtray.
Not sure what I am doing wrong but I have a solid list of what works.
I am blessed with good luck, I am very attentive to my garden!
I love my Girlies!
Bless,
DZ
glockdoc
Well-Known Member
solid post and very nice smoke report!
you are getting some great yields running 1 plant... you ever think about running a few more to have some diversity?
or are you happy enough with how that mystery clone is dialed in?!? seeing it is dialed it you can put it aside. maybe shop for a reputable strain thats a heavy yielder, and see how that performs!
once u find a 2nd strain that performs just as well as ur clone then you could run them both.. you might get an oz +/- then if u had just ran 1 strain but at least you would get some variety
keep us posted!
you are getting some great yields running 1 plant... you ever think about running a few more to have some diversity?
or are you happy enough with how that mystery clone is dialed in?!? seeing it is dialed it you can put it aside. maybe shop for a reputable strain thats a heavy yielder, and see how that performs!
once u find a 2nd strain that performs just as well as ur clone then you could run them both.. you might get an oz +/- then if u had just ran 1 strain but at least you would get some variety
keep us posted!
Dogenzengi
Well-Known Member
I want to run this strain till I work out all of the kinks in my knowledge.
Then I will break out the MasterKush seeds I have.
I still have not gotten a hit that was not harsh....
Not sure were I am going wrong to get a smoother smoke.
but as Long as it smokes, stays lit, burns well and gets me high I am a happy camper.
Bless,
DZ
Then I will break out the MasterKush seeds I have.
I still have not gotten a hit that was not harsh....
Not sure were I am going wrong to get a smoother smoke.
but as Long as it smokes, stays lit, burns well and gets me high I am a happy camper.
Bless,
DZ
Dogenzengi
Well-Known Member
Oh,
My flower tent is a 3x3x6 so it's pretty small, that's why one at a time.
And
Glock doc, I trade some to get a little of different strains.
At least My bud is Reggae Band Approved!
IMHO It can still be better!
Bless,
DZ
My flower tent is a 3x3x6 so it's pretty small, that's why one at a time.
And
Glock doc, I trade some to get a little of different strains.
At least My bud is Reggae Band Approved!
IMHO It can still be better!
Bless,
DZ
glockdoc
Well-Known Member
you should see how it runs scrogged. either (2) 5 or 7 gal hempy scrog or a 27 gal soil scrog. i bet you would net 10+.( i know you like to run 1 plant, but to easily fill the screen 2 would do it IMO)
i got 7oz from 6 plants in a 3x1.5wx5h
im working on getting a 4x4 room built, need to get back to work to grab some funds though
i got 7oz from 6 plants in a 3x1.5wx5h
im working on getting a 4x4 room built, need to get back to work to grab some funds though
Dogenzengi
Well-Known Member
I scrogged my first plant, it was flowered in an Ebb n Flow setup in my tent.
I used LST and super cropping tech to control the top of my subsequent plants flowered.
I use wires to pull the plant apart and if needed to hold a branch or two till they set in a position of my choosing.
I figure as a beginner (4th plant flowering) I still have lots to learn.
It seems easier to have one strain because this Sativa uses less Nutes, a lower PPM than
My first which was a bag seed Indica.
I saved a cut of that as well, The Indica clone is tucked away in my Veg.
I still don't do more than a weekly flush of my franken Hempy container.
Plant is in Rock Wool, bucket has 1/4" holes 6" on center 2" inches from the bottom.
The bucket is Filled with Hydroton to just above holes , than I place the rock wool in and cover with Hydroton.
No perlite or vermiculite....
I have done three plants in this Franken Hempy system.
It works for me and the Hydroton is reusable by just removing plant roots and letting the Hydroton dry out.
Bless,
DZ
I used LST and super cropping tech to control the top of my subsequent plants flowered.
I use wires to pull the plant apart and if needed to hold a branch or two till they set in a position of my choosing.
I figure as a beginner (4th plant flowering) I still have lots to learn.
It seems easier to have one strain because this Sativa uses less Nutes, a lower PPM than
My first which was a bag seed Indica.
I saved a cut of that as well, The Indica clone is tucked away in my Veg.
I still don't do more than a weekly flush of my franken Hempy container.
Plant is in Rock Wool, bucket has 1/4" holes 6" on center 2" inches from the bottom.
The bucket is Filled with Hydroton to just above holes , than I place the rock wool in and cover with Hydroton.
No perlite or vermiculite....
I have done three plants in this Franken Hempy system.
It works for me and the Hydroton is reusable by just removing plant roots and letting the Hydroton dry out.
Bless,
DZ
jondamon
Well-Known Member
Just so you know, with a 400w you could run 4 plants trained using the mainline technique that I've employed from NUGBUCKETS and pull an easy 12oz.
My best 4 plant grow so far has been 439g dry. Around 15.6 ounces using my 400w.
I utilise a 3.2x3.2 footprint to achieve my yield. So not too far out from yours.
J