Is the Server Blocking my IP address? - Page 4

Seamaiden · #31 04-09-2008, 04:40 PM

Quote:

Originally Posted by GrowRebel

I did what you said ... here is the results ...

Tracing route to rollitup.org [67.201.13.36]
over a maximum of 30 hops:

1 20 ms 12 ms 10 ms 10.254.1.1
2 10 ms 8 ms 13 ms 72-2-64-129.suite224.net [72.2.64.129]
3 8 ms 9 ms 11 ms g0-5.as1.ctc.clevoh.e-xpedient.com [206.183.22.1
29]
4 10 ms 10 ms 10 ms v173.cr2.halle.clevoh.e-xpedient.com [206.183.27
.162]
5 35 ms 11 ms 13 ms g1-1.cr1.halle.clevoh.e-xpedient.com [216.183.17
4.133]
6 11 ms 10 ms 10 ms ge-6-23-102.car2.Cleveland1.Level3.net [4.78.59.
13]
7 12 ms 10 ms 15 ms ae-11-11.car1.Cleveland1.Level3.net [4.69.132.19
7]
8 30 ms 18 ms 18 ms ae-4-4.ebr1.Washington1.Level3.net [4.69.132.194
]
9 43 ms 38 ms 33 ms ae-2.ebr3.Atlanta2.Level3.net [4.69.132.85]
10 66 ms 55 ms 52 ms ae-7.ebr3.Dallas1.Level3.net [4.69.134.21]
11 97 ms 90 ms 89 ms ae-3.ebr2.LosAngeles1.Level3.net [4.69.132.77]
12 94 ms 86 ms 89 ms ae-92-92.csw4.LosAngeles1.Level3.net [4.69.137.3
0]
13 87 ms 134 ms 83 ms ae-4-99.edge3.LosAngeles1.Level3.net [4.68.20.20
1]
14 82 ms 85 ms 89 ms xe2-0.cr01.lax01.mzima.net [4.71.136.2]
15 86 ms 89 ms * xe1-0.cr01.lax02.mzima.net [64.235.224.182]
16 85 ms 86 ms 87 ms ge0-webnx.cust.lax04.mzima.net [72.37.172.158]
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 *

Can you see what the problem is?

#16 --

Quote:

16 85 ms 86 ms 87 ms ge0-webnx.cust.lax04.mzima.net [72.37.172.158]

That's where you're hanging up.

GrowRebel · #32 04-09-2008, 04:47 PM

But what do I do to stop it? Or can I? Thanks for posting ...

Seamaiden · #33 04-09-2008, 04:51 PM

That's the problem, if your ISP's servers are being "read" as spam, it's up to your ISP to correct the problem. If there are any other sites that you can't get to without a proxy, then tell them those are the sites.

Here, try this one (it's the one I had trouble with) just for shits and giggles: X-Cessories.net

GrowRebel · #34 04-09-2008, 04:57 PM

No problem getting to that web site ... and this is the only website I can't get to ... there was another ... but I can't remember it ... I think it was some kind of test site ... got the same response ... but no problems getting to any other site ...

GrowRebel · #35 04-09-2008, 05:03 PM

Quote:

Originally Posted by kurupt

K Clear your fiefox and I.E browser Caches Restart computer run cmd type > ipconig/all ipconfig/release ipconfig/renew or maybe you have to much security on our computer i would say a very secure antir virus . if not Get A Linksys Router And Change Your I.P then see if you cant load the page up

Okay I think I understand what you suggested to do ... I bought up the cmd prompt typed in "ipconfig/all" that brought up my info ... then I typed "ipconfig/release" then I typed "ipconfig/renew" ... I also clear the caches ... oh oh ... I didn't restart the computer ... before hand ... I'll try it again ... but I'm thinking it's not going to work ...

kurupt · #36 04-09-2008, 08:15 PM

Quote:

Originally Posted by GrowRebel

Whoa ... back up a little ... I need to get the exact spelling on that command ... are you saying I need to type "ipconfig/all" or "ipconfig/release" or "ipconfig/renew" or are you telling me to type "ipconfig/allipconfig/releaseipconfig/renew"? Are you sure a router would do the job? Thanks for posting ...

My Bad iight Run a NEw Command Box type ipconfig/release then hit enter when it releases your i.p's gonna fall to 00.00.00.00 iight then type in ipconfig/renew ..hit enter everything on I.E nd firefox should be workin faster and should load every page if tis doest help i recommend ccleaner or a script bloccin program like avast anti virus

kurupt · #37 04-09-2008, 08:17 PM

if all of this fails id go buy a cheap wireless router so you can change your i.p whenever yu feel like it

FilthyFletch · #38 04-10-2008, 01:07 AM

Also if using a router that uses N.A.T protection you may have to go in and configure your ports to allow full connection to the site

kurupt · #39 04-10-2008, 01:16 AM

All Of The Routers Like Linksys have easy configurations but easy to hack into if you dont change admin and the password which is usaly root and root or admin and root. im on linksys

FilthyFletch · #40 04-10-2008, 01:23 AM

I use netgear and it uses NAT protection which is basically just a pain in the ass but I didnt design it. I use overseas routing through secure multiple proxies with non static ips then a few other personal securities and multiple browser proxies and then few bogus isp accounts to be safe