electromagnetize meter through wall?

I know this is a no no, in curiosity always kills the cat, so just theoretically,

couldn't you attach a large size electro magnet to the interior of your residence wall, parallel or perpendicular to the backside of your meter?

like those magnets you see on cranes, that hold 1000+ lbs?

I'm guessing it would totally work, but I'm no physicist, in reversing the polarity would make it spin very fast correct?

Again, this is tbeoretical.

A big no no!

just wanted to know what you thought guys...

lol

geegee1432 said:

I know this is a no no, in curiosity always kills the cat, so just theoretically,

couldn't you attach a large size electro magnet to the interior of your residence wall, parallel or perpendicular to the backside of your meter?

like those magnets you see on cranes, that hold 1000+ lbs?

I'm guessing it would totally work, but I'm no physicist, in reversing the polarity would make it spin very fast correct?

Again, this is tbeoretical.

A big no no!

just wanted to know what you thought guys...

Click to expand...

what u are talking is not possible anymore

what u are trying to do is hold the disk from spinning and stop the counter .......this would only work on a magnetic metal witch the disk is not so it would have no effect on the meter
as for any parts that are magnetic is would compress them/deform them from the pull of a 1000 lb magnet as the parts would be small and thin ( and this is if u are getting it directly on the back of the meter with less then 2 inches

flipping the power would only put a pull on negative side (power one way positive drawl power the other way negative drawl ) and rem that magnetic have the strongest attraction to the opposite + to - / - to +

if u have the money to spend on a magnet that strong i do know of something that u can use to mess with anything electronic and a method of shielding u/your area from wireless signals
build a degaussing loop into your doorways using a light switch to control the power (this will wipe all computer/digital info )
other is a simple copper mesh in ceiling and walls to block the signals ....the windows u have to get a special film for

justugh said:

build a degaussing loop into your doorways using a light switch to control the power (this will wipe all computer/digital info )

Click to expand...

I've destroyed/degaussed hard drives for hipaa compliance. It's not like on tv.

- Jiji

jijiandfarmgang said:

I've destroyed/degaussed hard drives for hipaa compliance. It's not like on tv.

- Jiji

Click to expand...

http://physics.stackexchange.com/questions/110870/could-a-hard-drive-actually-have-been-erased-as-described-in-cryptonomicon

it is just matter of enough power to form a strong field
only a SSD drive would have a chance of working but if the field is strong with high enough pulse rating it will damage the unit to unusable ........as for ram on cellphones or any recording deceives they are messed with too

it really is that simple the cost of setting something up if u have some skill under 1k .......a emp gun will run u few thousand (thought about making one)

justugh said:

http://physics.stackexchange.com/questions/110870/could-a-hard-drive-actually-have-been-erased-as-described-in-cryptonomicon

it is just matter of enough power to form a strong field
only a SSD drive would have a chance of working but if the field is strong with high enough pulse rating it will damage the unit to unusable ........as for ram on cellphones or any recording deceives they are messed with too

it really is that simple the cost of setting something up if u have some skill under 1k .......a emp gun will run u few thousand (thought about making one)

Click to expand...

Thats a good article. Did you read all the comments because it proves my point.

Just saying, anyone toying with the idea has little knowledge about computers and encryption.

- Jiji

Get yourself a flux capacitor and you'll be good to go

skunkd0c said:

Get yourself a flux capacitor and you'll be good to go

Click to expand...

time travel is not possible ...........see as we are set in motion now every action we take forms the future ......if u were to travel back in time u would alter the past with your actions (might not mean too but something would change...and as u can not predict the ripple effect ....u travel back something changed u travel forward the present and future has altered to do down a different path ) .......think about it if Hitler did not fail as artisan he would of never became bitter and tried to kill a whole culture WW2 would of never of started it would of just been a japan war.....(hell if japan would of left Hawaii alone we would of never entered that fight and they could of controlled china )

so at that u are not really time traveling more parallel exist hopping ......but the present u left from would be lost forever unless u never time travel

jijiandfarmgang said:

Thats a good article. Did you read all the comments because it proves my point.

Just saying, anyone toying with the idea has little knowledge about computers and encryption.

- Jiji

Click to expand...

nope did not read those .........if i was to listen to nay sayers i would of never done half the shit i done in my life

i have a buddy that his job was to hangs the door frames and doors for the government jobs around here (alot of those frames are hollow boxed steel) they are prefect for doing it (and where do u think they put the magnets to lock the doors in the frame they run the power tho the hollow part so the wires can not be cut/breached so the door will not open unless u have a rdfa tag .....the one thing most ppl do not know that the fire alarm will disable those locks to allow firefighter access to control the fire )

justugh said:

i have a buddy that his job was to hangs the door frames and doors for the government jobs around here (alot of those frames are hollow boxed steel) they are prefect for doing it (and where do u think they put the magnets to lock the doors in the frame they run the power tho the hollow part so the wires can not be cut/breached so the door will not open unless u have a rdfa tag .....the one thing most ppl do not know that the fire alarm will disable those locks to allow firefighter access to control the fire )

Click to expand...

I had a job where I managed said doors. Its a magnetic striker. The ones I managed had door controllers on a network controlled software. With rifd tag/ combo readers. I could unlock them all once, if I wanted to lose my job I suppose. But there was no fire alarm integration.

If you think a fire alarm is going to unlock a vault door, think again.

- Jiji

jijiandfarmgang said:

I had a job where I managed said doors. Its a magnetic striker. The ones I managed had door controllers on a network controlled software. With rifd tag/ combo readers. I could unlock them all once, if I wanted to lose my job I suppose. But there was no fire alarm integration.

If you think a fire alarm is going to unlock a vault door, think again.

- Jiji

Click to expand...

before or after 9/11

i was 16 when i met my first door like this ...........in the hospital the fire alarm made the doors unlock (after i did that they protected it from me) so the 2nd and 3rd time i escaped had to use lead in a socket near the door to blow the breaker (beat up 4 cops so it was mental ward or jail for 6 months)

but after 9/11 the system as i understand it was changed to allow first responders quick access ( and the same thing again with the navy yard shooting )

try testing the electric / magnetic field on your ballast you'll think twice about growing in a closet where you sleep.. .. not to mention testing the rest of the stuff in your house. it's called a "fluxcapacitor" look it up ....gosh ...pfft.

but no really... they have digital ones (e use meters on the house AC) now that are evil says the internet.. no dials just digital.. and they send live feed of e consumption via cellphone radiation to the utility company. it can be tested for with some rf analysers/electrosmog meters. ~900mhz. please correct me if incorrect